Ọrọ Iṣaaju
This manual provides instructions for the safe and efficient use of your RadioShack Y665 Wireless Bluetooth Speaker. Please read this manual thoroughly before using the product and retain it for future reference. This compact and portable speaker features Bluetooth 5.0 connectivity, a 5W audio output, and an 800mAh rechargeable battery, offering 5 to 6 hours of continuous playback.
Ọja Pariview
Package Awọn akoonu
- RadioShack Y665 Wireless Bluetooth Speaker
- Okun Ngba agbara USB
- 3.5mm USB Iranlọwọ
Idanimọ paati
This image displays the top panel of the speaker, highlighting the control buttons. From left to right, these include the Power button, Play/Pause button, Volume Down button, Volume Up button, and Mode (M) button.
This image shows the speaker alongside its USB charging cable. The charging port is typically located on the side or back of the speaker.
- Bọtini agbara: Press and hold to turn the speaker ON or OFF.
- Bọ́tìnnì Ṣíṣe/Sánu duro: Tẹ lati mu ṣiṣẹ tabi da ohun duro duro.
- Iwọn didun isalẹ (-): Tẹ lati dinku iwọn didun.
- Iwọn didun soke (+): Tẹ lati mu iwọn didun pọ si.
- Bọtini Ipo (M): Press to switch between Bluetooth and Auxiliary input modes.
- Ibudo gbigba agbara: Ibudo USB Micro fun gbigba agbara agbọrọsọ naa.
- Iṣawọle Iranlọwọ: 3.5mm jack fun asopọ ohun onirin.
Ṣeto
Gbigba agbara si Agbọrọsọ
Ṣaaju lilo akọkọ, gba agbara si agbọrọsọ ni kikun lati rii daju pe iṣẹ batiri to dara julọ.
- So opin kekere ti okun gbigba agbara USB ti o wa ninu rẹ pọ mọ ibudo gbigba agbara lori agbọrọsọ naa.
- So opin nla ti okun USB pọ si ohun ti nmu badọgba agbara USB (kii ṣe pẹlu) tabi ibudo USB ti kọnputa kan.
- The charging indicator light will illuminate (color may vary) during charging and turn off or change color when fully charged.
- Charging typically takes 2 to 3 hours.
Titan / Pipa agbara
Láti tan agbọ́hùnsọ̀, tẹ kí o sì di i mú Bọtini agbara until you hear an audible prompt or see an indicator light.
To turn the speaker OFF, press and hold the Bọtini agbara again until you hear an audible prompt or the indicator light turns off.
Awọn ilana Iṣiṣẹ
Asopọ Bluetooth
- Ensure the speaker is charged and powered ON. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
- Lori ẹrọ alagbeka rẹ (foonuiyara, tabulẹti, ati bẹbẹ lọ), mu Bluetooth ṣiṣẹ ki o wa awọn ẹrọ to wa.
- Select "RadioShack Y665" (or similar name) from the list of found devices.
- Once paired, the speaker will emit an audible confirmation, and the LED indicator will stop flashing and remain solid.
- Agbọrọsọ yoo tun sopọ laifọwọyi si ẹrọ ti o so pọ to kẹhin nigbati o ba wa ni ina, ti ẹrọ naa ba wa laarin ibiti ati Bluetooth ti ṣiṣẹ.
Auxiliary (AUX) Mode
- Connect one end of the 3.5mm auxiliary cable to the AUX input port on the speaker.
- Connect the other end of the auxiliary cable to the headphone jack of your audio source device.
- Tẹ awọn Bọtini Ipo (M). on the speaker to switch to AUX mode.
- Play audio from your connected device. Volume can be controlled via both the speaker and the source device.
Sisisẹsẹhin Orin
- Ṣiṣẹ/Daduro: Tẹ awọn Bọtini Muu ṣiṣẹ/Daduro to start or pause music.
- Atunse iwọn didun: Tẹ awọn Iwọn didun soke (+) or Iwọn didun isalẹ (-) buttons to adjust the speaker's volume.
Itoju
Ninu
- Disconnect the speaker from all power sources before cleaning.
- Use a soft, dry cloth to wipe the exterior of the speaker.
- Ma ṣe lo awọn afọmọ abrasive, waxes, tabi awọn nkanmimu.
- Yago fun gbigba ọrinrin sinu eyikeyi awọn ṣiṣi.
Ibi ipamọ
- Tọju agbohunsoke ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
- Tí o bá ń tọ́jú rẹ̀ fún ìgbà pípẹ́, gba agbára léraléra láti jẹ́ kí ó pẹ́.
Laasigbotitusita
Wọpọ Oran ati Solusan
| Isoro | Ojutu |
|---|---|
| Agbọrọsọ ko ni tan. | Rí i dájú pé batiri náà ti gba agbára. So agbọrọsọ náà mọ́ orísun agbára nípa lílo okùn USB. |
| Ko si ohun. | Check the volume level on both the speaker and your connected device. Ensure the speaker is in the correct mode (Bluetooth or AUX). |
| Ko le so pọ nipasẹ Bluetooth. | Ensure the speaker is in pairing mode (flashing LED). Turn off Bluetooth on your device and turn it back on. Move the speaker closer to your device. Clear previous Bluetooth connections on your device. |
| Didara ohun ti ko dara. | Ensure the speaker and connected device are within Bluetooth range (10m). Check for interference from other wireless devices. Try a different audio source or cable (for AUX mode). |
Awọn pato
Imọ ni pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Awoṣe | 100124414 (Y665) |
| Ijade agbara | 5W |
| Ẹya Bluetooth | 5.0 |
| Alailowaya Ibiti | Titi de awọn mita 10 (33 ẹsẹ) |
| Agbara Batiri | 800mAh |
| Akoko Sisisẹsẹhin | 5 si 6 wakati |
| Akoko gbigba agbara | 2 si 3 wakati |
| Agbara titẹ sii | 5V DC, 1A |
| Igbohunsafẹfẹ Band | 2400 MHz - 2483.5 MHz |
| Àwọ̀ | Dudu |
| UPC/GTIN | 793945379804 |
| To wa Awọn ẹya ẹrọ | USB Charging Cable, 3.5mm Auxiliary Cable |
Alaye atilẹyin ọja
This product is covered by a warranty of 1 month from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to your retailer or the official RadioShack webojula.
Onibara Support
For technical assistance or further information, please visit the official RadioShack webojula: www.radioshack.com.mx
You may also contact customer service at: 55 2582 0999.