Herdio 4 Inch 240W Marine Bluetooth Speakers

Ọja Pariview

The Herdio 4 Inch 240W Marine Bluetooth Speakers are designed for outdoor environments, offering robust sound and waterproof durability. This system includes four 4-inch 2-way full-range speakers and a Bluetooth amplifier, suitable for various vehicles and outdoor settings.

Key features include Bluetooth 5.0 connectivity, IP66 waterproof rating, and a compact design for versatile mounting. The system provides a maximum output power of 240 Watts (60 Watts per speaker) with a frequency response of 80Hz-20kHz and 4 Ohms impedance.

Ohun ti o wa ninu Apoti

• 4 x Marine Speakers with Mounting Brackets
• 1 x Bluetooth Amplifier (4-channel)
• Okun Agbara DC 1 x 12V
• 1 x Set of Bolts and Screws

Awọn pato

Eto & Fifi sori

Follow these steps to install and connect your Herdio Marine Bluetooth Speakers:

1. Gbigbe Agbọrọsọ:
   The speakers come with adjustable mounting brackets. Loosen the knobs on the sides of each speaker to remove the bracket. Secure the bracket to your desired surface using the provided screws. Once the bracket is fixed, place the speaker back into the bracket and tighten the knobs to secure it. The bracket allows for 180-degree rotation for optimal sound direction.
2. Speaker Wiring to Ampolutọpa:
   Use a small screwdriver to loosen the terminals on the amplifier. Connect the speaker cables to the amplifier terminals. Ensure that the white wire (positive) and black wire (negative) from each speaker are connected to the corresponding L+ (Left Positive), L- (Left Negative), R+ (Right Positive), and R- (Right Negative) terminals on the amplifier. Awọn amplifier atilẹyin 4 awọn ikanni.
3. Asopọ Ipese Agbara:
   Connect the provided 12V DC power cable to the amplifier. The red wire from the power cable links to your 12V battery's positive terminal, and the black wire links to the negative terminal. Ensure a secure connection to prevent power interruptions.
4. Mimuuṣiṣẹpọ Bluetooth:
   Once powered on, the amplifier's blue light will blink, indicating it is in pairing mode. On your device (smartphone, tablet, etc.), search for Bluetooth devices and select 'Herdio' to connect. A constant blue light on the amplifier indicates a successful connection.

Awọn ilana Iṣiṣẹ

Awọn amplifier features several buttons for controlling playback and settings:

1. Bọtini Agbara/Ṣiṣiṣẹ/Duro:
   Long press (3 seconds) to power on/off. Short press to play or pause music.
2. Bọtini Ipo:
   Long press (3 seconds) to restore factory settings. Short press to switch between Bluetooth (BT), USB, AUX, and MIC modes.
3. Volume Down/TWS Button:
   Long press (3 seconds) to enter/exit TWS (True Wireless Stereo) mode. Short press to decrease the volume.
4. Volume Up/Mono Button:
   Long press (3 seconds) to switch between stereo and mono sound output. Short press to increase the volume.
5. Bọtini Orin/pada sẹhin:
   Long press (3 seconds) for fast rewind. Short press to go to the previous song.
6. Bọtini Titẹ siwaju/Yara Siwaju:
   Long press (3 seconds) for fast forward. Short press to go to the next song.

Itoju

Láti rí i dájú pé àwọn Agbọrọsọ Bluetooth Herdio Marine rẹ pẹ́ títí àti pé wọ́n ń ṣiṣẹ́ dáadáa, tẹ̀lé àwọn ìlànà ìtọ́jú wọ̀nyí:

• Ninu: Máa nu àwọn agbọ́hùnsọ̀ náà déédéé pẹ̀lú ohun rírọ̀, d.amp cloth to remove dirt and salt residue. Avoid using harsh chemicals or abrasive cleaners.
• Ifihan omi: While the speakers are IP66 waterproof, prolonged submersion is not recommended. Ensure all connections are secure to maintain water resistance.
• Ibi ipamọ: When not in use for extended periods, store the speakers in a dry, cool place away from direct sunlight and extreme temperatures.
• Awọn ayẹwo Asopọmọra: Periodically inspect all wiring and connections for any signs of wear, corrosion, or looseness. Tighten connections as needed.

Laasigbotitusita

If you encounter issues with your Herdio Marine Bluetooth Speakers, refer to the following common problems and solutions:

• Ko si Agbara:
  - Ensure the 12V DC power cable is securely connected to both the amplifier and the power source (battery).
  - Check the power source for proper voltage and functionality.
• Ko si Ohun:
  - Verify that the speaker wires are correctly connected to the amplifier terminals (positive to positive, negative to negative).
  - Confirm that the amplifier ti wa ni titan ati iwọn didun ti wa ni titan.
  - Check the audio source (Bluetooth device, USB, AUX) for proper playback and volume settings.
  - Rii daju amplifier is in the correct input mode (BT, USB, AUX, MIC).
• Bluetooth Ko Sopọ:
  - Rii daju pe amplifier is in Bluetooth mode (blue light blinking).
  - Ensure your device's Bluetooth is enabled and within the 20-meter range.
  - Try forgetting the device from your phone's Bluetooth settings and re-pairing.
  - Restart both the amplifier ati ẹrọ Bluetooth rẹ.
• Ohun Yiyi:
  - Reduce the volume on both the amplifier àti orísun ohùn rẹ.
  - Check speaker wire connections for any loose or corroded contacts.
  - Ensure the speakers are not overloaded beyond their rated power.

Atilẹyin ọja & Atilẹyin

The Herdio 4 Inch 240W Marine Bluetooth Speakers come with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty information provided with your product packaging or contact Herdio customer support.

For technical assistance, troubleshooting beyond this manual, or inquiries about replacement parts, please visit the official Herdio webojula tabi kan si wọn onibara iṣẹ Eka.