Ìwé Àkójọ Àkókò Àfikún Aláìlágbára PPLEE CR1027 Ìwé Àtọ́wọ́dọ́wọ́ Olùlò

1. Ifihan

Thank you for choosing the PPLEE Wireless Vibrating Alarm Clock. This device is designed to provide a reliable and effective wake-up solution, especially for heavy sleepers, individuals with hearing impairment, or those who prefer a silent alarm. It features wireless vibration, dual alarms, multiple awake modes, and a rechargeable battery for portability and convenience.

Jọ̀wọ́ ka ìwé ìtọ́ni yìí dáadáa kí o tó lo ọjà náà láti rí i dájú pé ó ṣiṣẹ́ dáadáa àti láti mú kí àwọn ohun èlò rẹ̀ pọ̀ sí i.

Aworan 1: Iwaju view of the PPLEE Wireless Vibrating Alarm Clock, displaying the time and alarm indicators.

2. Ọja Ipariview

Awọn akoonu idii:

• PPLEE Wireless Vibrating Alarm Clock
• USB Iru-C Ngba agbara USB
• Itọsọna olumulo

Ilana Ẹrọ:

Aworan 2: Pariview of the alarm clock showing its compact size and key features like Dual Alarms, 12/24 Hour mode, Child Lock, USB Charger, Snooze, Battery Powered, 3 Awake Modes, and 3-Levels Vibration Strength.

The alarm clock features a clear LCD display on the front. Control buttons are located on the top and sides for easy access. A Type-C charging port is located on the side.

3. Eto

3.1 Ngba agbara si Ẹrọ

Before first use, fully charge the alarm clock. Connect the provided USB Type-C cable to the charging port on the device and plug the other end into a USB power adapter (not included) or a computer USB port. The battery indicator on the display will show charging status. A full charge takes approximately 4 hours and provides up to 3 months of operation.

Image 3: The alarm clock connected to a USB charging port, illustrating the Type-C connection.

3.2 Ṣiṣeto Aago naa

1. Tẹ awọn TIME/SNOOZE bọ́tìnì láti tẹ ipò ìṣètò àkókò wọlé. Àwọn nọ́mbà wákàtí náà yóò máa tàn yanranyanran.
2. Lo awọn + ati - awọn bọtini lati ṣatunṣe awọn wakati.
3. Tẹ TIME/SNOOZE lẹ́ẹ̀kan síi láti jẹ́rìí wákàtí náà kí o sì gbé e sí ìṣètò ìṣẹ́jú náà. Àwọn nọ́mbà ìṣẹ́jú náà yóò máa tàn yanranyanran.
4. Lo awọn + ati - awọn bọtini lati ṣatunṣe awọn iṣẹju.
5. Tẹ TIME/SNOOZE to confirm the minutes and exit time setting.

Ilana wakati 12/24:

While in time setting mode, press the Eto gbigbọn bọtini lati yipada laarin awọn ọna kika wakati 12 (AM/PM) ati wakati 24.

Iṣẹ́ Àkókò Ìfipamọ́ Ọ̀sán (DST):

Tẹ awọn + button on the top of the clock to activate or deactivate the DST function. When activated, the time will automatically advance by one hour.

3.3 Ṣíṣeto Awọn Itaniji (Alarm 1 & Itaniji 2)

The clock supports two independent alarms. Follow these steps for each alarm:

1. Tẹ awọn OOGUN 1 or OOGUN 2 button to select the desired alarm. The alarm time will flash.
2. Lo awọn + ati - awọn bọtini lati ṣatunṣe awọn wakati.
3. Press the selected Itaniji bọtini lẹẹkansi lati jẹrisi wakati naa ki o si gbe si eto iṣẹju.
4. Lo awọn + ati - awọn bọtini lati ṣatunṣe awọn iṣẹju.
5. Press the selected Itaniji button to confirm the minutes and exit alarm time setting.

Image 4: The alarm clock displaying two different alarm settings, one for a weekday and one for the weekend, illustrating the dual alarm functionality.

Weekday/Weekend Mode:

After setting the alarm time, use the WEEKDAY MODE switch (located on the side/back) to select the alarm schedule:

• Ọjọ́ Ajé sí Ọjọ́ Ẹtì: Alarm activates Monday to Friday.
• SAT-SUN: Alarm activates Saturday and Sunday.
• MON-SUN: Alarm activates every day.

Selecting Awake Modes:

The alarm clock offers three awake modes: vibrate only, ring only, or vibrate + ring. Press the Ipo ALARMU button (usually near the alarm setting buttons) repeatedly to cycle through these options. The corresponding icon will appear on the display.

Image 5: The alarm clock illustrating the three selectable alarm modes: Buzzer Sound & Vibration, Louder Buzzer Sound, and Vibration only.

Adjusting Vibration Strength:

The device has 3 levels of vibration strength (Low, Medium, High). Use the Eto gbigbọn switch/button to select your preferred intensity.

Image 6: Close-up of the alarm clock indicating the three vibration strength levels (L, M, H) via a switch.

Iṣatunṣe Iwọn didun Itaniji:

If you select a ring or vibrate + ring mode, you can adjust the alarm volume. Use the Iwọn didun buttons (often combined with +/-, or a dedicated switch) to set the desired sound level. There are 5 adjustable volume levels.

Image 7: The alarm clock displaying adjustable alarm volume levels and different alarm types (Buzzer & Vibration, Vibrating, Buzzer).

4. Ṣiṣẹ Aago Itaniji

4.1 Iṣiṣẹ Snooze

When an alarm sounds or vibrates, press the large SNOOZE/TIME button on the top of the clock to temporarily silence it. The alarm will reactivate after 9 minutes.

Image 8: The alarm clock with the snooze function activated, indicating a 9-minute delay before the alarm reactivates.

4.2 Išẹ Titiipa Ọmọ

To prevent accidental changes to settings or to save battery power, activate the child lock. Locate the TItiipa ỌMỌDE switch (usually on the side or bottom) and slide it to the 'ON' position. This will disable most buttons.

Image 9: The alarm clock demonstrating the child lock feature, showing a small switch to enable or disable it.

4.3 Isẹ Backlight

The LCD display has a built-in backlight. The screen will automatically dim after 30 seconds to save power. Press any button to activate the backlight for clear viewing ni kekere-ina awọn ipo.

4.4 Optimal Placement for Vibration

For effective vibration, place the alarm clock in one of the following locations:

• Under your pillow.
• Under a fitted sheet.
• Between the mattress and box spring.

Image 10: Illustrations showing recommended placements for the vibrating alarm clock: under a pillow, under a fitted sheet, and between the mattress and box spring.

5. Itọju

5.1 Ninu

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the surface. Avoid exposing the device to excessive moisture.

5.2 batiri Itọju

To prolong battery life, avoid fully discharging the battery frequently. Recharge the device when the low battery indicator appears. If storing the device for an extended period, charge it fully every few months.

6. Laasigbotitusita

• Alarm not activating:
  • Ensure the alarm is set correctly (time, AM/PM, weekday/weekend mode).
  • Check that the alarm mode (vibrate, ring, or both) is selected.
  • Verify the child lock is not engaged.
  • Rii daju pe batiri ti gba agbara.
• Ifihan jẹ baibai tabi òfo:
  • Press any button to activate the backlight.
  • Charge the device if the battery is low.
• Ẹrọ ko gba agbara:
  • Check the USB Type-C cable for damage and ensure it is securely connected.
  • Gbiyanju ohun ti nmu badọgba agbara USB ti o yatọ tabi ibudo.
• Àìpéye àkókò:
  • Reset the time manually.
  • Ensure the DST function is correctly set for your region.
• Awọn bọtini ko dahun:
  • Check if the child lock is engaged.
  • Try resetting the device by pressing the Tunto button (if available, often a small pinhole).

7. Awọn pato

8. Atilẹyin ọja ati Support

8.1 atilẹyin ọja Alaye

The PPLEE Wireless Vibrating Alarm Clock comes with a s'aiye atilẹyin ọja. This warranty covers manufacturing defects and ensures the product's quality and performance under normal use.

8.2 Onibara Support

For any questions, technical assistance, or warranty claims, please contact PPLEE customer support through the retailer's platform or visit the official PPLEE website for contact information. Please have your model number (CR1027) and purchase details ready when contacting support.