1. Ọja Ipariview
The Streamlight ProTac Rail Mount HL-X Pro is a high-performance, lightweight, and low-profile long gun light designed for tactical applications. It delivers a powerful 1000 lumens and 50,000 candelas, providing a beam distance of up to 447 meters. This multi-fuel light offers versatility, capable of operating with either two CR123A lithium batteries or the included Streamlight SL-B26 USB rechargeable battery.
Awọn ẹya pataki pẹlu:
- Awọn abajade Lumens 1000: Provides intense illumination for various scenarios.
- Agbara epo pupọ: Compatible with CR123A batteries or the rechargeable SL-B26 USB battery.
- Yiyipada Iru Jack-Cap: Offers dual operational control with both a push-button and a port for a remote pressure switch.
- Eto TEN-TAP: Allows users to select from three different operating programs.
- Integrated Rail Clamps: Facilitates easy, tool-free attachment to MIL-STD 1913 Picatinny rails and M-LOK compatible rail systems.
Image 1.1: The Streamlight ProTac Rail Mount HL-X Pro USB Light shown with all included components, such as the light unit, remote pressure switch, M-Lok kit, and USB charging cable.
2. Awọn irinše to wa
The Streamlight ProTac Rail Mount HL-X Pro USB Light (Model 88127) package typically includes the following items:
- ProTac Rail Mount HL-X Pro Light Unit
- 1 SL-B26 USB Rechargeable Battery Pack
- 40-inch USB Cord
- Jack-Cap Tail Switch (pre-installed or separate)
- M-Lok Kit
- Momentary Pressure Switch
- Hardware Kit for mounting
- 25mm Allen Wrench
Aworan 2.1: alaye view of all items provided in the product packaging, including the light, battery, charging cable, and mounting hardware.
3. Eto ati fifi sori
3.1 Batiri sori ati gbigba agbara
- Unscrew the tail cap of the light unit.
- Insert the SL-B26 USB rechargeable battery with the positive (+) end facing towards the head of the light.
- Yi ideri iru pada pada ni aabo.
- To charge the SL-B26 battery, connect the included USB cord to the battery's USB port and a compatible USB power source. The indicator light on the battery will show charging status.
- Alternatively, two CR123A lithium batteries can be used. Ensure correct polarity when inserting.
3.2 Iṣagbesori Light
The ProTac Rail Mount HL-X Pro is designed for easy attachment to MIL-STD 1913 Picatinny rails and M-LOK compatible rail systems.
- Identify the desired mounting location on your rail system.
- For Picatinny rails, use the integrated rail clamps. Loosen the thumbscrew, position the light on the rail, and tighten the thumbscrew firmly by hand.
- For M-LOK systems, attach the M-Lok kit to the light unit using the provided hardware. Then, align the M-Lok attachment points with the M-Lok slots on your rail and secure using the M-Lok fasteners and the 25mm Allen wrench.
- If using the remote pressure switch, attach it to the Jack-Cap tail switch port and secure the pressure pad to your desired location on the firearm using the provided mounting accessories.
Image 3.1: The ProTac Rail Mount HL-X Pro light securely mounted on a long gun rail, demonstrating its low-profile oniru.
4. Awọn ilana Iṣiṣẹ
4.1 Iṣẹ́ Yiyi Iru Jack-Cap
The Jack-Cap tail switch provides versatile control:
- Ni akoko kukuru: Press and hold the push-button on the tail cap. Release to turn off.
- Nigbagbogbo Lori: Press the push-button fully until it clicks. Press again to turn off.
- Yipada Ipa Latọna jijin: When connected, the remote pressure switch provides momentary activation. Press and hold the pressure pad for momentary on. Some models may offer a constant on button on the pressure switch assembly.
Aworan 4.1: alaye view of the Jack-Cap tail switch, showing the push-button and the port for the remote pressure switch connection.
4.2 Light Modes and Performance
The ProTac Rail Mount HL-X Pro features multiple output modes:
- Ga: 1000 Lumens, 50,000 Candela, 447m beam distance. Runtime: 1.25 hours (CR123A) / 1.75 hours (SL-B26).
- Kekere: 60 Lumens, 3,100 Candela, 111m beam distance. Runtime: 21 hours (CR123A) / 24 hours (SL-B26).
- Ẹ̀ka: For signaling or disorienting. Runtime: 2.5 hours (CR123A) / 3.5 hours (SL-B26).
4.3 Ṣíṣeto TEN-TAP
The TEN-TAP programming allows you to select one of three user-selectable programs:
- High/Strobe/Low (Factory Default): Tap (momentary press) the switch rapidly 10 times, holding it down on the 10th tap. The light will turn off. Continue holding until the light flashes. Release the switch.
- High Only: Repeat the 10-tap process. The light will flash twice. Release the switch.
- Kekere/Gíga: Repeat the 10-tap process. The light will flash three times. Release the switch.
To cycle through the programs, repeat the 10-tap process. The light will indicate the current program by flashing 1, 2, or 3 times.
5. Itọju
Proper maintenance ensures the longevity and optimal performance of your Streamlight ProTac Rail Mount HL-X Pro light.
- Ninu: Nu ina naa pẹlu mimọ, damp cloth. Do not use abrasive cleaners or solvents. Keep the lens clean for maximum light output.
- O-Oruka: Periodically inspect the O-rings for wear and tear. Apply a thin coat of silicone grease to maintain water resistance. Replace O-rings if damaged.
- Itọju Batiri: For the SL-B26 USB battery, charge it regularly, especially if the light will not be used for an extended period. Store the battery in a cool, dry place. If using CR123A batteries, replace them when the light output diminishes. Do not mix old and new batteries or different battery types.
- Awọn isopọ: Ensure all electrical contacts and connections (battery terminals, tail cap threads) are clean and free of debris.
6. Laasigbotitusita
If you encounter issues with your Streamlight ProTac Rail Mount HL-X Pro, consider the following common solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan | Dead or low battery; Incorrect battery orientation; Loose tail cap; Dirty contacts | Charge or replace battery; Ensure correct polarity; Tighten tail cap; Clean battery and light contacts |
| Imọlẹ jẹ baibai tabi flickers | Low battery; Loose tail cap; Dirty contacts | Charge or replace battery; Tighten tail cap; Clean battery and light contacts |
| Remote pressure switch not working | Not fully plugged into Jack-Cap; Damaged switch or cable | Ensure secure connection; Inspect switch and cable for damage, contact support if damaged |
| Cannot change TEN-TAP program | Incorrect tapping sequence | Ensure rapid, consistent taps (10 times, holding on the 10th) |
Tí àwọn ìgbésẹ̀ wọ̀nyí kò bá yanjú ìṣòro náà, jọ̀wọ́ wo apá ìdánilójú àti àtìlẹ́yìn fún ìrànlọ́wọ́ síwájú síi.
7. Imọ ni pato
Detailed specifications for the Streamlight ProTac Rail Mount HL-X Pro USB Light (Model 88127):
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Nọmba awoṣe | 88127 |
| Orisun Imọlẹ | LED |
| Ohun elo | Aluminiomu anodized |
| Àwọ̀ | Dudu |
| Iwọn Lumens | 1000 Lumens |
| Iye ti o ga julọ ti Candela | 50,000 Candela |
| Ijinna tan ina | 447 meters (High) |
| Orisun agbara | Battery Powered (SL-B26 USB Rechargeable or 2x CR123A) |
| Voltage | 3.7 Volts (SL-B26) |
| Batiri Cell Tiwqn | Litiumu Iwon |
| Iwọn Nkan | 7.2 iwon (0.45 iwon) |
| Awọn iwọn Ọja (L x W x H) | 5.43"D x 1.45"W x 1.72"H |
| Omi Resistance Ipele | Alatako omi (IP54) |
| Awọn iwe-ẹri | ANSI, CE |
Image 7.1: Visual representation of the light's dimensions and key performance indicators like max output, runtime, and beam distance.
8. Atilẹyin ọja ati Support
Streamlight products are known for their durability and reliability. The Streamlight ProTac Rail Mount HL-X Pro USB Light comes with a Atilẹyin ọja to lopin.
This warranty covers defects in material and workmanship for the lifetime of the product, excluding batteries, bulbs, abuse, and normal wear and tear. For specific details regarding warranty claims or technical support, please visit the official Streamlight webojula tabi kan si wọn onibara iṣẹ Eka.
For additional information and product support, you may visit the official Streamlight store on Amazon: Streamlight Store.