RECOIL REQ7 7-Band Car Audio Equalizer User Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your RECOIL REQ7 7-Band Car Audio Parametric Graphic Equalizer. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

2. Key Awọn ẹya ara ẹrọ

• 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer.
• Fully Adjustable -12 dB to +12 dB EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz and 16kHz).
• 2 channels of speaker level inputs & 6 channels of RCA outputs (front, rear, sub).
• Auxiliary stereo RCA input & front panel auxiliary stereo input.
• Separate level controls on front of EQ for convenience (master, sub, front/rear fader, main/auxiliary inputs).
• Exceptional 83 dB signal-to-noise performance.
• Extended frequency response from 20 Hz to 30 kHz.
• Gaju gigatage (Max Output Voltage 7V) Premium Tiffany RCA connectors.
• ISO mounting holes and removable trim ring for custom installation.
• Includes installation brackets and hardware.

3. Alaye Aabo

Nigbagbogbo ṣe akiyesi awọn iṣọra ailewu atẹle lakoko fifi sori ẹrọ ati iṣẹ:

• Yọ asopọ batiri odi ti ọkọ ayọkẹlẹ naa ṣaaju iṣẹ ina eyikeyi.
• Ensure all wiring is correctly routed and secured to prevent damage or short circuits.
• Do not operate the unit in wet conditions or expose it to excessive moisture.
• Kan si onimọran ẹrọ afetigbọ ọkọ ayọkẹlẹ ti o ba ni idaniloju nipa awọn igbesẹ fifi sori ẹrọ eyikeyi.
• Avoid adjusting audio settings while driving to maintain focus on the road.

4. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• RECOIL REQ7 Equalizer Unit
• Awọn biraketi fifi sori
• Ohun elo iṣagbesori (awọn skru, ati bẹbẹ lọ)
• Ìjánu Okùn Agbára/Ilẹ̀
• Afowoyi Olumulo (iwe-ipamọ yii)

5. Ọja Ipariview

5.1 Iwaju Panel idari

Image: Front panel of the RECOIL REQ7 equalizer, showing the seven EQ band controls, master volume, subwoofer level, fader, and auxiliary input.

• IPELU IBI: Adjusts the output level of the subwoofer channel.
• IDAGBASOKE: Master volume control for all channels.
• AUX S/W: Switch to select between Main and Auxiliary input.
• AX IN: 3.5mm stereo jack for auxiliary audio input.
• FADER: Balances the audio output between front and rear channels.
• EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz): Seven individual rotary controls to adjust the gain (-12dB to +12dB) for specific frequency ranges.

5.2 Ru Panel Awọn isopọ

Image: Rear panel of the RECOIL REQ7 equalizer, displaying RCA inputs (Main In, Aux In, Hi Input), RCA outputs (Front Out, Rear Out, Sub Out), and power connection.

• SUB OUT (L/R): RCA outputs for connecting to a subwoofer amplifier.
• AUX IN (L/R): RCA inputs for auxiliary audio sources.
• HI INPUT (L/R): Speaker level inputs for connecting to a factory head unit without RCA outputs.
• MAIN IN (L/R): RCA inputs for the primary audio source (e.g., head unit).
• REAR OUT (L/R): RCA outputs for connecting to a rear channel amplifier.
• FRONT OUT (L/R): RCA outputs for connecting to a front channel amplifier.
• AGBARA: Connection terminal for power, ground, and remote turn-on wires.
• LOW PASS FREQUENCY Switch (90Hz/60Hz): Selects the low-pass crossover frequency for the subwoofer output.

6. fifi sori

Proper installation is crucial for optimal performance. If you are not comfortable with car audio wiring, seek professional assistance.

6.1 Iṣagbesori

1. Choose a suitable mounting location that is dry, well-ventilated, and accessible for adjustments. The REQ7 is a 1/2 DIN size, allowing for flexible placement.
2. Use the provided mounting brackets and hardware to secure the equalizer. Ensure the unit is firmly attached to prevent vibration.
3. The removable trim ring can be used for custom installations to achieve a flush look.

6.2 Awọn isopọ onirin

Refer to the diagram below for typical wiring connections.

Aworan: Oke-isalẹ view of the RECOIL REQ7 equalizer, illustrating the various input and output connections for a car audio system.

• Power (RED wire): Connect to a fused +12V constant power source from the vehicle's battery.
• Ground (BLACK wire): Connect to a clean, solid chassis ground point in the vehicle. Ensure good metal-to-metal contact.
• Remote (BLUE wire): Connect to the remote turn-on output of your head unit or other switched +12V source. This turns the equalizer on/off with your audio system.
• Awọn igbewọle Audio:
  • RCA Inputs (MAIN IN / AUX IN): So awọn kebulu RCA pọ lati inu ẹyọ ori rẹ ṣaaju-amp outputs to the MAIN IN. Use AUX IN for additional RCA sources.
  • High Level Inputs (HI INPUT): If your head unit does not have RCA outputs, connect the speaker wires directly to the HI INPUT terminals.
• Audio Outputs (FRONT OUT / REAR OUT / SUB OUT): Connect RCA cables from these outputs to the corresponding inputs on your external ampalifiers.

7. Awọn ilana Iṣiṣẹ

7.1 Ibẹrẹ Agbara-soke

1. After completing all wiring, reconnect the vehicle's negative battery terminal.
2. Turn on your head unit. The REQ7 should power on automatically via the remote wire.
3. Start with all EQ bands at their center (flat) position, master volume low, and subwoofer level low.

7.2 Siṣàtúnṣe iwọn Eto

• Aṣayan Orisun: Lo awọn AUX S/W switch to toggle between the MAIN IN (RCA from head unit) and AUX IN (front panel 3.5mm or rear RCA auxiliary inputs).
• Iwọn Titunto: Laiyara mu awọn Iwọn didun bọtini si ipele gbigbọ ti o ni itunu.
• Ipele Subwoofer: Ṣatunṣe awọn IPILE SUB knob to blend the subwoofer output with the main speakers.
• FADER Control: Lo awọn BABA knob to balance the sound between the front and rear speakers.
• Idogba: Adjust the individual Ẹgbẹ EQ controls (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz) to fine-tune the audio frequency response to your preference. Increase (+) to boost a frequency, decrease (-) to cut it.
• Àlẹmọ Pass kekere: Lo awọn LOW Pass Igbohunsafẹfẹ switch on the rear panel to select the desired crossover point (60Hz or 90Hz) for the subwoofer output. This ensures only low frequencies are sent to the subwoofer.

8. Itọju

• Jeki ẹyọ naa di mimọ ati ofe kuro ninu eruku. Lo asọ asọ ti o gbẹ fun mimọ.
• Maṣe lo awọn kemikali lile tabi awọn afọmọ abrasive.
• Ensure all connections remain secure over time. Periodically check wiring for any signs of wear or corrosion.

9. Laasigbotitusita

10. Awọn pato

11. Atilẹyin ọja ati Support

RECOIL products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official RECOIL webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.

For further assistance, you may contact RECOIL customer support through their official channels.