Ìwé Àgbékalẹ̀ Olùlò Ibùdó Agbára Pókì HP200

1. Ọja Ipariview

The powkey HP200 is a portable power station designed for various power needs, including outdoor activities, home backup, and emergencies. It integrates a 146Wh lithium-ion battery and offers multiple output ports for diverse electronic devices.

Image: The powkey HP200 Portable Power Station shown with its accompanying 40W foldable solar panel and various charging cables, including AC power adapter, car charging cable, and DC to DC cable.

Awọn akoonu idii:

• 1 x powkey 200W Portable Power Station (HP200)
• 1 x 40W Foldable Solar Panel
• 1 x Oko Siga fẹẹrẹfẹ Adapter
• 1 x Adaparọ Agbara AC
• 1 x Okun gbigba agbara ọkọ ayọkẹlẹ
• 1 x Itọsọna olumulo

2. Awọn ilana aabo

• Maṣe ṣe titu, tunṣe, tabi yipada ẹya.
• Do not place the unit near fire or in direct sunlight.
• Má ṣe gba agbára, lò, tàbí tọ́jú ẹ̀rọ náà sínú yàrá ìwẹ̀ tàbí ní agbègbè tí omi tàbí ọ̀rinrin bá wà.
• Lo ṣaja ati awọn okun waya ti a pese nikan.
• Jeki kuro ni arọwọto awọn ọmọde ati awọn ohun ọsin.
• Rii daju pe fentilesonu to dara lakoko lilo lati ṣe idiwọ igbona.
• Yago fun gbigbe silẹ tabi tẹriba ẹyọ si awọn ipa to lagbara.
• Do not use the unit if it is damaged or has been modified.
• The power station is not designed to support heating products over 100W (e.g., juicers, microwave ovens, blenders, water heaters, coffee machines, bread machines).

Image: Visual representation of appliances not supported by the power station due to high wattage, including juicers, microwave ovens, blenders, water heaters, coffee machines, and bread machines.

3. Eto

Gbigba agbara akọkọ:

1. Unpack the power station and all accessories.
2. Before first use, fully charge the power station using the provided AC power adapter. Connect the adapter to the 15V/2A DC input port on the unit.
3. The 4 built-in LED indicators will show the battery level during charging. A full charge typically takes 5-6 hours.

Solar Panel:

1. Unfold the 40W solar panel and place it in direct sunlight.
2. Connect the solar panel to the 15V/2A DC input/Solar input port on the power station.
3. Charging time via solar panel is approximately 6-9 hours in full sun.

Image: Diagram illustrating the three charging methods for the power station: wall outlet, 40W solar panel, and car charging.

4. Awọn ilana Iṣiṣẹ

Titan / Pipa:

• To power on the unit, press the main power button once. The LCD display will illuminate.
• To power off the unit, press and hold the main power button.

Lilo Awọn Ibudo Ojade:

The HP200 features 7 versatile output ports:

• 2 x 110V AC Outlets: Pure sine wave output, total max 200W. To activate AC output, press the dedicated AC power button. The LCD panel will show "AC" when active. Ensure connected devices do not exceed 200W total, and heating products are less than 100W.
• 4 x USB Ports: Fun gbigba agbara awọn ẹrọ USB.
• 1 x DC Port (12V): For DC-powered devices.

Aworan: Isunmọ view of the powkey HP200 power station, highlighting its 2 AC outlets, 4 USB outlets, 1 DC outlet, and 1 input port, along with its compact dimensions.

Iṣẹ ina filaṣi LED:

• Press the flashlight button once to turn on the LED light.
• Tẹ lẹẹkansi fun ipo strobe.
• Press a third time for blinking mode.
• Tẹ igba kẹrin lati paa ina filaṣi.

5. Itọju

• Tọju ẹyọ naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Recharge the unit every 3-6 months to maintain battery health, even if not in use.
• Mọ ode pẹlu asọ ti o gbẹ. Ma ṣe lo abrasive ose tabi epo.
• Rii daju pe gbogbo awọn ebute oko oju omi ko ni eruku ati idoti.

6. Laasigbotitusita

Ẹka Ko Tii:

• Ensure the battery is charged. Connect to a power source and check the LED indicators.
• Press and hold the main power button for a few seconds to ensure it's not just a quick press.

Awọn ẹrọ Ko Ngba agbara:

• Verify the power station is turned on.
• For AC devices, ensure the AC output is activated by pressing its dedicated button.
• Check if the device's power consumption exceeds the power station's output limits (200W total, 100W for heating products).
• Ensure cables are securely connected to both the power station and the device.

Idaabobo Apọju:

The unit features Over Current Protection (OCP) and Over Voltage Protection (OVP). If an overload occurs, the unit may automatically shut down to protect itself. Disconnect the overloaded device and restart the power station.

7. Awọn pato

8. Atilẹyin ọja ati Support

powkey provides a 30-day product return with a money-back guarantee. The product contains high-quality lithium-ion battery cells and is manufactured in an ISO9001 approved factory, ensuring 100% quality control. For further assistance or inquiries, please contact powkey customer service.

Note: Specific warranty duration beyond 30 days is not detailed in the provided product information. Please refer to your purchase documentation or contact powkey directly for full warranty terms.