MCombo 7634 Triple Motor Power Lift Recliner Chair Instruction Manual

Ọrọ Iṣaaju

Thank you for choosing the MCombo 7634 Triple Motor Power Lift Recliner Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new recliner. Please read all instructions carefully before use and retain this manual for future reference.

Awọn ikilọ Abo pataki

Àìtẹ̀lé àwọn ìlànà ààbò wọ̀nyí lè fa ìpalára tàbí ìbàjẹ́ sí ọjà náà.

• Always assemble the chair according to the provided instructions.
• Maṣe kọja agbara iwuwo ti o pọju ti 350 lbs (158 kg).
• Be cautious when using the massage and heat functions to avoid burns or discomfort. Monitor usage, especially for individuals with reduced sensation.
• Keep the chair away from water and other potential hazards to prevent electrical shocks.
• Ensure all power cords are properly routed and not pinched or damaged.
• Pa awọn ọmọde ati awọn ẹranko mọ kuro ni awọn ẹya gbigbe ti alaga naa.
• Ma ṣe gba ẹnikẹni laaye lati joko lori igbasẹ ẹsẹ nigbati o ba gbooro sii.
• Unplug the chair from the power outlet before cleaning or maintenance.

Eto ati Apejọ

The MCombo 7634 recliner is designed for easy assembly, typically requiring no tools and taking approximately 20 minutes for a novice. The chair arrives in three separate boxes.

Awọn Igbesẹ Apejọ:

1. Anti-Back-Tipping Installation: Attach the anti-back-tipping mechanism to the base of the chair. This ensures stability during operation.
2. Apejọ Armrests: Carefully align and slide the left and right armrests onto the metal brackets on the chair's base. Ensure they are securely locked into place.
3. Apejọ Backrest: Position the backrest over the base, aligning the metal receivers on the backrest with the corresponding posts on the base. Push down firmly until the backrest clicks into place.
4. Awọn isopọ Waya: Connect all electrical wires located at the back of the chair. Ensure all connections are secure and properly matched (e.g., color-coded or uniquely shaped connectors). Connect the remote controls and the power adapter. Once connected, plug the power adapter into a wall outlet and turn on the power switch located on the chair's base.

Awọn ilana Iṣiṣẹ

Your MCombo recliner features triple motor functionality, allowing independent adjustment of the headrest, backrest, and footrest, along with massage, heating, and power lift functions. Two remote controls are provided for these features.

Awọn iṣẹ iṣakoso latọna jijin:

One remote controls the chair's movement:

• Gbe soke: Raises the chair to assist in standing.
• Sinmi: Lowers the chair into a reclined position.
• Back (Up/Down): Adjusts the angle of the backrest independently.
• Legrest (Up/Down): Extends or retracts the footrest independently.
• Headrest (Up/Down): Adjusts the angle of the headrest independently.

The second remote controls the massage and heating functions:

• Bọtini agbara: Turns the massage and heat functions on/off.
• Awọn agbegbe ifọwọra: Select specific areas for massage (Leg, Thigh, Lumbar, Back) or activate all zones.
• Awọn ọna ifọwọra: Cycle through different massage patterns (M1, M2, M3).
• Awọn ipele kikankikan: Adjust massage intensity (Low, Medium, High).
• Iṣẹ Ooru: Activates dual heating for the lumbar and seat areas.
• Aago: Set the operating time for massage and heat (15, 30, 60 minutes).

Awọn ẹya pataki:

• Infinite Position: Adjust the headrest, backrest, and footrest separately for personalized comfort.
• Power Headrest: Allows for custom head and neck support, especially when reclined.
• Isinmi Ẹsẹ ti o gbooro sii: The 4.7-inch extended footrest provides full leg support, preventing dangling feet.
• Dual USB Charging Ports & Cup Holders: Conveniently located on the armrests for charging mobile devices and holding beverages.

Itoju

Proper care will extend the life and appearance of your MCombo recliner.

• Awọn ilana Itọju Ọja: Spot Clean only. Use a soft, damp cloth with mild soap for spills or stains. Avoid harsh chemicals or abrasive cleaners.
• Itọju Alawọ Faux: Regularly wipe down the faux leather with a dry or slightly damp cloth to remove dust and dirt. Avoid direct sunlight and heat sources to prevent material degradation.
• Awọn ohun elo itanna: Periodically check all wires and connections for any signs of wear or damage. Ensure the power cord is not tangled or pinched.
• Awọn ẹya gbigbe: The chair's mechanisms are designed for long-term use. Avoid forcing any moving parts. If you notice unusual noises or stiffness, contact customer support.

Laasigbotitusita

If you encounter any issues with your recliner, please refer to the following common solutions:

• Àga Kò Dáhùn:
  - Ensure the power cord is securely plugged into a working electrical outlet.
  - Check that the power switch on the chair's base is in the 'ON' position.
  - Verify all wire connections between the chair components and remotes are firm.
• Ifọwọra / Ooru Ko Ṣiṣẹ:
  - Confirm the massage/heat remote is properly connected and powered on.
  - Check the timer setting; the function may have automatically turned off.
• Awọn Ariwo Alailẹgbẹ:
  - Inspect the chair's base and moving parts for any obstructions.
  - Ensure all assembly bolts and connections are tight.
• Awọn oran Iṣakoso Latọna jijin:
  - Check for any visible damage to the remote or its cord.
  - Ensure the remote is properly plugged into the chair's connection port.

If the problem persists after attempting these steps, please contact MCombo Customer Support.

Awọn pato

Atilẹyin ọja

Your MCombo 7634 Triple Motor Power Lift Recliner Chair comes with a Atilẹyin ọja olupese ọdun meji. Atilẹyin ọja yi ni wiwa:

• Ìlànà ìjókòó àti gbígbé sókè
• Itanna Parts
• Ohun elo ohun elo
• Awọn ijoko
• Igi ati Irin fireemu

Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Onibara Support

For any questions, assistance, or warranty claims, please contact MCombo Customer Support. Refer to the contact information provided with your purchase or visit the official MCombo webojula.