1. Ifihan
Thank you for choosing the USX MOUNT Universal Full Motion TV Wall Mount. This manual provides detailed instructions for safe installation, operation, and maintenance of your new wall mount. Please read this manual thoroughly before installation and keep it for future reference.
This mount is designed to securely hold 10-26 inch displays with a maximum weight of 10kg (22 lbs). It supports VESA mounting patterns of 50x50mm, 75x75mm, and 100x100mm.
Figure 1.1: USX MOUNT Universal Full Motion TV Wall Mount
2. Awọn alaye ọja
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Awoṣe | USX-WM1026 |
| Ibamu Iwon Iboju | 10 - 26 inches |
| O pọju fifuye Agbara | 10 kg (22 lbs) |
| VESA ibamu | 50x50mm, 75x75mm, 100x100mm |
| Titẹ Igun | +30° / -30° |
| Igun Yiyipo (Awo Odi) | ±45° (depending on TV size) |
| Ijinna Odi | 62mm |
| Ohun elo | Tutu-yiyi Irin |
| Àwọ̀ | Dudu |
Akiyesi: Always verify your TV's weight, screen size, and VESA pattern before installation to ensure compatibility.
Figure 2.1: Compatibility Check for TV Size, VESA, Weight, and Wall Type
Figure 2.2: Supported VESA Mounting Patterns
3. Alaye Aabo
Please read and understand all instructions before installation. If you have any questions, contact customer support. Improper installation may result in property damage or personal injury.
- Do not install this product on drywall or plasterboard alone. It must be mounted to a solid concrete wall or a wooden stud.
- Ensure the wall structure can safely support the combined weight of the mount and your display.
- Má ṣe ju agbára ẹrù tó pọ̀ jù lọ lọ ti 10kg (22 lbs).
- Use only the provided hardware. If any parts are missing or damaged, contact customer support.
- Always have two people for installation, especially when lifting the TV.
- Pa awọn ọmọde ati awọn ohun ọsin kuro lakoko fifi sori ẹrọ.
4. Package Awọn akoonu
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, please contact USX MOUNT customer service.
Ni igbagbogbo package naa pẹlu:
- Wall Apejọ
- TV akọmọ
- Mounting Hardware (screws, anchors, washers for various TV and wall types)
- Ilana itọnisọna
5. Itọsọna fifi sori ẹrọ
Tẹ̀lé àwọn ìgbésẹ̀ wọ̀nyí dáadáa fún ìfisílẹ̀ tó ní ààbò.
5.1. Yan Iru Odi Rẹ
This mount is suitable for installation on solid concrete walls or wooden studs. Do NOT install on drywall or plasterboard without securing to a stud.
Figure 5.1: Compatible Wall Types
5.2. Igbesẹ-nipasẹ-Igbese fifi sori
- So Awo Odi naa: Position the wall plate on your chosen wall location. Mark the drilling points. Drill pilot holes and secure the wall plate using appropriate screws and anchors for your wall type. Ensure it is level and firmly attached.
- Attach TV Bracket to TV: Secure the TV bracket to the back of your television using the provided VESA screws and washers that match your TV's VESA pattern. Ensure the bracket is centered and tightened securely.
- So TV sori Awo Odi: Carefully lift the TV (with the bracket attached) and hook it onto the wall plate. Ensure the TV is properly seated and locked into place.
- Ṣatunṣe Igun: Adjust the TV to your desired viewing angle using the tilt and swivel mechanisms.
Figure 5.2: Simplified Installation Steps
6. Iṣẹ́ àti Àtúnṣe
This full motion mount allows for flexible positioning of your display.
6.1. Atunṣe Tẹ
The TV bracket allows for a tilt range of +30 degrees upward and -30 degrees downward. Loosen the tilt adjustment knobs on the side of the TV bracket, set the desired angle, and then tighten the knobs to secure the position.
6.2. Àtúnṣe Yíyípo
The wall-side attachment allows for a swivel of up to 45 degrees left or right. The actual range of motion may vary depending on the size of your television. Gently push the TV to the desired left or right angle.
Figure 6.1: Tilt Adjustment and Wall Distance
7. Itọju
Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti oke ogiri TV rẹ.
- Ṣayẹwo lẹẹkọọkan: Every few months, check that all screws and connections are tight and secure.
- Ninu: Mu ese naa nu pẹlu asọ ti o gbẹ. Ma ṣe lo abrasive ose tabi epo.
- Lubrication: The moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact customer support.
8. Laasigbotitusita
Ti o ba pade awọn ọran eyikeyi, tọka si awọn iṣoro ati awọn solusan ti o wọpọ atẹle wọnyi.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| TV kii ṣe ipele | Wall plate or TV bracket not installed level. | Carefully adjust the wall plate or TV bracket. Ensure all screws are tightened after adjustment. |
| Oke kan lara riru | Screws are loose or incorrect wall anchors used. | Re-check all mounting screws for tightness. Ensure appropriate anchors were used for your wall type. Do not exceed weight capacity. |
| Difficulty adjusting tilt/swivel | Adjustment knobs are too tight or mechanism is stiff. | Loosen adjustment knobs slightly before attempting to move. If still stiff, contact customer support. |
For issues not listed here, or if problems persist, please contact USX MOUNT customer support.
9. Atilẹyin ọja ati Support
USX MOUNT provides a 10-odun didara atilẹyin ọja from the date of purchase for this product. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your USX MOUNT product, please contact our customer service team. Please have your purchase information and model number (USX-WM1026) ready when contacting support.