JB systems LIVE-10 8-Channel Mixer with Media Player User Manual

1. Ifihan

O ṣeun fun riraasing the JB systems LIVE-10 8-Channel Mixer with Media Player. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference. The LIVE-10 is a versatile PA mixer designed for live sound applications, offering multiple input channels, built-in effects, and integrated media playback capabilities via USB or Bluetooth.

2. Awọn Ilana Aabo pataki

• Orisun Agbara: Connect the unit only to the specified power supply (5V USB). Ensure the voltage ibaamu awọn ibeere.
• Omi ati Ọrinrin: Má ṣe fi ohun èlò yìí sí ojú òjò tàbí ọrinrin. Má ṣe gbé àwọn ohun èlò tí ó kún fún omi, bíi àwọn ohun èlò ìgò, sí orí ohun èlò náà.
• Afẹfẹ: Rii daju pe fentilesonu to dara. Ma ṣe dina eyikeyi awọn ṣiṣi atẹgun.
• Ooru: Maṣe gbe nitosi awọn orisun ooru gẹgẹbi awọn imooru, awọn iforukọsilẹ ooru, awọn adiro, tabi awọn ohun elo miiran (pẹlu ampliifiers) ti o gbe ooru jade.
• Ninu: Mọ pẹlu asọ gbigbẹ nikan.
• Ṣiṣẹ: Maṣe gbiyanju lati ṣiṣẹ ọja yi funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ ti o peye.
• Awọn kebulu: Dabobo okun agbara lati ma rin lori tabi pin, ni pataki ni awọn pilogi, awọn ohun elo irọrun, ati aaye nibiti wọn ti jade kuro ninu ohun elo naa.

3. Package Awọn akoonu

Daju pe gbogbo awọn ohun ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ. Ti awọn ohun kan ba nsọnu tabi bajẹ, jọwọ kan si alagbata rẹ.

• JB systems LIVE-10 8-Channel Mixer
• Ohun ti nmu badọgba Agbara USB
• Okun Agbara USB
• Afowoyi Olumulo (iwe-ipamọ yii)

Aworan 3.1: Included USB Power Adapter and USB Power Cable. The adapter is a black block with a two-prong plug, and the cable is black with USB-A connectors on both ends.

4. Ọja Ipariview

4.1 Iwaju Panel idari ati awọn isopọ

Aworan 4.1: Front panel of the JB systems LIVE-10 mixer, showing all input channels, controls, and the media player section.

The front panel of the LIVE-10 mixer features all primary controls and input/output connections for operation.

• Channels 1-6 (MIC/LINE): Each channel includes XLR microphone inputs, 1/4" line inputs, GAIN control, LOW CUT button, 3-band EQ (HIGH, MID, LOW), FX/SEND control, PAN control, and LEVEL fader. A +48V phantom power button is available for condenser microphones.
• Channel 7/8 (Stereo Line): Features 1/4" stereo line inputs, GAIN, 3-band EQ, FX/SEND, BALANCE, and LEVEL controls.
• Channel 9/10 (Stereo Line/USB/Player): Offers 1/4" stereo line inputs, or can be switched to USB/Media Player input. Includes GAIN, 3-band EQ, FX/SEND, BALANCE, and LEVEL controls.
• Ẹrọ orin ohun elo media oni-nọmba: Located in the upper right, with a digital display, control buttons (MODE, PLAY/PAUSE, SKIP), and a USB port for media playback or connection to a computer.
• Ifilelẹ akọkọ: XLR and 1/4" outputs for connecting to main PA speakers. Controlled by the MAIN fader.
• Ijade Yara Iṣakoso: 1/4" outputs for connecting to studio monitors or control room speakers.
• Agbekọri Ijade: 1/4" stereo jack with dedicated level control for monitoring.
• FX Send/Return: 1/4" jacks for connecting external effects processors.
• Atọka Agbara: LED indicating power status.

4.2 Ru Panel Awọn isopọ

Aworan 4.2: Rear panel of the JB systems LIVE-10 mixer, showing the power input and USB port.

• POWER EXT. DC IN (5V/1A): USB-B port for connecting the external 5V DC power supply.
• USB: USB-A port for connecting to a computer for audio interface functionality.

5. Eto

1. Ṣii silẹ: Carefully remove the mixer and all accessories from the packaging.
2. Ibi: Place the mixer on a stable, flat surface, ensuring adequate ventilation around the unit.
3. Asopọ agbara: Connect the provided USB power cable to the "POWER EXT. DC IN (5V/1A)" port on the rear of the mixer and then to the USB power adapter. Plug the adapter into a suitable power outlet. The power LED on the front panel should illuminate.
4. Connecting Main Outputs: Connect the MAIN OUT (XLR or 1/4") to your main PA system or powered speakers.
5. Connecting Control Room/Headphones: Connect your control room monitors to the CTRL ROOM OUT and/or headphones to the PHONES jack for monitoring.
6. Awọn igbewọle Nsopọ:
   • Awọn gbohungbohun: Connect microphones to the XLR inputs of channels 1-6. If using condenser microphones, activate the +48V phantom power for the respective channels.
   • Awọn ẹrọ Ipele Laini: Connect instruments, media players, or other line-level devices to the 1/4" LINE inputs of channels 1-10.
7. Awọn Eto Ibẹrẹ: Before powering on connected speakers or amplifiers, ensure all channel LEVEL faders and the MAIN fader are set to their minimum position.

6. Awọn ilana Iṣiṣẹ

6.1 Basic Channel Operation (Channels 1-10)

1. Iṣakoso Jèrè: Adjust the GAIN knob for each input channel to achieve an optimal input level. Aim for the signal to be strong without clipping (distortion).
2. OGUN kekere: Press the LOW CUT button to engage a high-pass filter, reducing unwanted low-frequency rumble from microphones.
3. Idogba (EQ): Use the HIGH, MID, and LOW knobs to adjust the tonal characteristics of each channel.
   • GIGA: Adjusts treble frequencies.
   • Àárín: Adjusts mid-range frequencies.
   • Kekere: Adjusts bass frequencies.
4. FX/FIRANṢẸ: Controls the amount of signal sent from the channel to the internal effects processor or external FX send output.
5. PAN (Channels 1-6) / BALANCE (Channels 7-10): Adjusts the stereo position of the channel's signal.
6. Ipele Fader: Ó ń ṣàkóso gbogbo ìwọ̀n ikanni tí a fi ránṣẹ́ sí àdàpọ̀ pàtàkì.

6.2 Digital Media Player Operation

The integrated media player supports playback from USB memory sticks and Bluetooth devices.

1. Sisisẹsẹhin USB:
   • Insert a USB memory stick containing WMA, WAV, FLAC, APE, or MP3 audio files into the USB port on the media player section.
   • Press the "MODE" button until "USB" is displayed.
   • Use the PLAY/PAUSE and SKIP buttons to control playback.
   • Adjust the LEVEL fader for Channel 9/10 to control the media player's volume in the mix.
2. Sisisẹsẹhin Bluetooth:
   • Press the "MODE" button until "BT" (Bluetooth) is displayed.
   • On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available devices and select "LIVE-10" to pair.
   • Once paired, audio from your device will stream to the mixer.
   • Adjust the LEVEL fader for Channel 9/10 to control the Bluetooth audio volume.

6.3 USB Audio Interface Functionality

The LIVE-10 can function as a USB audio interface for recording to or playing back from a computer (PC/Mac).

1. Connect the USB-A port on the rear of the mixer to your computer using a standard USB cable.
2. Your computer should recognize the mixer as an audio device. Select it as the input/output device in your operating system's sound settings or your Digital Audio Workstation (DAW) software.
3. The mixer can send a mono mix of its output to the computer for recording or receive a stereo signal from the computer for playback through Channel 9/10.

6.4 Main Mix and Monitoring

• Olùdarí pàtàkì: Controls the overall output volume of the main mix to the MAIN OUTs.
• PHONES Level: Ṣe atunṣe iwọn didun fun iṣẹjade agbekọri.
• CTRL ROOM Level: Adjusts the volume for the control room outputs.

7. Itọju

• Ninu: Disconnect the mixer from power before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
• Ibi ipamọ: Nigbati o ko ba wa ni lilo fun awọn akoko ti o gbooro sii, tọju alapọpo ni itura, ibi gbigbẹ, kuro lati orun taara ati awọn iwọn otutu to gaju.
• Itọju USB: Avoid bending or crimping cables excessively. Store cables neatly to prevent damage.

8. Laasigbotitusita

9. Awọn pato

Awọn pato jẹ koko ọrọ si iyipada laisi akiyesi.

10. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized JB systems dealer. Keep your proof of purchase for any warranty claims.