1. Ifihan
The ETHERMA eTOUCH PRO Smart-Thermostat is an advanced climate control device designed for optimal comfort and energy efficiency. It features Wi-Fi connectivity for remote operation via iOS or Android devices, a self-learning mode, and a clear 1.8-inch TFT color display with capacitive touch buttons. This manual provides comprehensive instructions for installation, operation, and maintenance of your thermostat.
Figure 1: ETHERMA eTOUCH PRO Smart-Thermostat. The display shows the current temperature of 22.5°C, time 12:00, home icon, and Wi-Fi signal strength. Below the main temperature, it shows "ETHERMA" and "22.5 °C" again, with three capacitive touch buttons at the bottom for navigation.
2. Key Awọn ẹya ara ẹrọ
- Wi-Fi Asopọmọra: Seamless integration into a 2.4 GHz WLAN for remote control via iOS or Android devices.
- Ifihan ogbon inu: Equipped with a 1.8-inch TFT color display and three capacitive touch buttons for easy local operation.
- Awọn ọna Iṣiṣẹ lọpọlọpọ: Select from five modes including Home, Away, Weekly Program, Frost Protection, or Power Control to optimize comfort and energy costs.
- Ipo Ẹkọ-ara-ẹni: Features a self-learning algorithm for intelligent temperature regulation.
- Adjustable Heating Behavior: Customizable heating behavior to protect various floor coverings.
- Temperature Drop Detection: Automatically detects sudden temperature drops, indicating an open window, to save energy.
- Ibamu Sensọ gbooro: Supports a wide range of commercially available temperature sensors, facilitating easy replacement of older thermostats.
- Eco-Design Compliant: Designed in accordance with Eco-design guidelines for environmental sustainability.
3. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Etherma |
| Nọmba awoṣe | 324600 |
| Ọja Mefa | 1 x 1 x 1 cm |
| Voltage | 24 Volt (Control), 230 V (Max. Switching Voltage) |
| Adarí Iru | iOS, Android (App Control) |
| Ọna Iṣakoso | Ohun elo, Iboju ifọwọkan |
| Ilana Iru | Tan/Pa a |
| Iṣagbesori | On flush-mounted switch box |
| Iwọn Iwọn | 5 - 40 °C |
| Sensọ ita | Bẹẹni |
| Ifihan | Ifihan Awọ TFT 1.8" |
| Iru Aago | Weekly clock, digital |
| O pọju. Yipada Lọwọlọwọ | 16 A |
| Kilasi Idaabobo | IP21 |
| Àwọ̀ | Funfun (RAL 9003) |
4. Eto ati fifi sori
Installation of the ETHERMA eTOUCH PRO thermostat should be performed by a qualified electrician to ensure safety and proper functionality. The device is designed for mounting on a standard flush-mounted switch box.
4.1 Onirin
- Ensure the main power supply is disconnected before beginning any wiring.
- Connect the 2-wire system to the designated terminals.
- Connect the external temperature sensor if applicable. The thermostat supports a wide range of common sensors.
- Refer to the detailed wiring diagram provided in the product packaging for specific connections.
4.2 Eto Power-On ati Wi-Fi Ibẹrẹ
- After wiring, restore power to the circuit. The thermostat display will illuminate.
- Tẹ̀lé àwọn ìtọ́ni tó wà lójú ìbòjú fún ìṣètò àkọ́kọ́, títí kan yíyan èdè àti ètò àkókò/ọjọ́.
- To connect to Wi-Fi, navigate to the network settings menu on the thermostat.
- Ensure your Wi-Fi network is a 2.4 GHz network. The thermostat does not support 5 GHz networks.
- Download the ETHERMA app from the iOS App Store or Google Play Store on your smartphone or tablet.
- Follow the in-app instructions to pair your thermostat with the app and connect it to your home Wi-Fi network.
5. Awọn ilana Iṣiṣẹ
The eTOUCH PRO thermostat offers both local control via its display and remote control via the dedicated mobile application.
5.1 Local Operation (Touchscreen)
- The 1.8-inch TFT color display shows current temperature, time, and operating status.
- Use the three capacitive touch buttons located below the display to navigate menus and adjust settings.
- Awọn itọka oke/isalẹ: Adjust temperature setpoints or navigate through menu options.
- Bọtini aarin: Jẹrisi awọn yiyan tabi tẹ awọn akojọ aṣayan-isalẹ sii.
- Press and hold the center button to access the main menu or return to the previous screen.
5.2 Awọn ọna ṣiṣe
The thermostat supports five primary operating modes:
- Ipò Ilé: Maintains a comfortable temperature for occupied periods.
- Ipo Away: Sets a lower, energy-saving temperature when the property is unoccupied.
- Weekly Program Mode: Allows for custom temperature schedules based on days of the week. This mode optimizes energy consumption by adjusting temperatures according to your routine.
- Ipo Idaabobo Frost: Prevents temperatures from dropping below a critical point (e.g., 5°C) to protect pipes and property from freezing.
- Power Control Mode: Regulates heating based on power output rather than temperature, useful for specific heating systems.
5.3 App Control (Remote Operation)
- Open the ETHERMA app on your iOS or Android device.
- Rii daju pe ẹrọ rẹ ti sopọ si intanẹẹti.
- Lati app, o le:
- View current temperature and status.
- Adjust temperature setpoints.
- Switch between operating modes.
- Create and modify weekly heating schedules.
- Monitor energy consumption (if supported by your system).
- Gba awọn titaniji ati awọn iwifunni.
6. Itọju
The ETHERMA eTOUCH PRO Smart-Thermostat requires minimal maintenance to ensure optimal performance and longevity.
- Ninu: Gently wipe the display and casing pẹlu asọ, gbẹ, tabi die-die damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and internal components.
- Awọn imudojuiwọn sọfitiwia: Periodically check the ETHERMA app for available firmware updates for your thermostat. Keeping the firmware updated ensures you have the latest features and bug fixes.
- Ṣayẹwo sensọ: If you suspect inaccurate temperature readings, ensure the external sensor (if used) is clean and unobstructed.
- Yiyipo Agbara: In case of minor operational issues, a brief power cycle (turning off the circuit breaker for a few minutes and then turning it back on) can often resolve the problem.
7. Laasigbotitusita
This section addresses common issues you might encounter with your ETHERMA eTOUCH PRO Smart-Thermostat.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Iboju thermostat ti ṣofo. | Ko si ipese agbara. | Check the circuit breaker. Ensure proper wiring connections. |
| Ko le sopọ si Wi-Fi. | Incorrect Wi-Fi password; 5 GHz network; weak signal. | Verify password. Ensure your router is broadcasting a 2.4 GHz network. Move router closer or use a Wi-Fi extender. |
| App cannot find the thermostat. | Thermostat not in pairing mode; network issue. | Ensure thermostat is in Wi-Fi pairing mode. Check home Wi-Fi connection. Restart both thermostat and app. |
| Kika iwọn otutu dabi pe ko pe. | Sensor obstruction; sensor malfunction. | Ensure the sensor (internal or external) is not covered or exposed to drafts/direct sunlight. If issue persists, contact support. |
| Heating/Cooling not activating. | Incorrect mode; wiring issue; system malfunction. | Check the selected operating mode and setpoint. Verify wiring. Consult a qualified technician if the issue persists. |
8. Atilẹyin ọja ati Support
For warranty information, please refer to the warranty card included with your product packaging or visit the official Etherma webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
For technical support, troubleshooting assistance, or inquiries about spare parts, please contact Etherma customer service:
- Webojula: www.etherma.com (Check for local contact details)
- Imeeli: Tọkasi awọn website for specific support email addresses.
- Foonu: Tọkasi awọn website for specific support phone numbers.
When contacting support, please have your product model number (eTOUCH-PRO-1-W) and serial number (if applicable) ready.