1. Ifihan
Thank you for choosing the Projecta PJ-AC080-2 12V 8.0A 8-Stage Automatic Battery Charger. This charger is designed for automotive and marine lead acid batteries, offering a fully automatic, spark-free, and polarity-protected charging and maintenance solution. Its advanced 8-stage charging process ensures optimal battery health and longevity. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.
2. Alaye Aabo pataki
Please read and understand all safety warnings and instructions before using this battery charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Afẹfẹ: Always use the charger in a well-ventilated area. Batteries can produce explosive gases.
- Eye and Skin Protection: Wear appropriate eye protection and clothing when working near batteries. Battery acid is corrosive.
- Spark-Free Connections: Ensure connections are made and broken in a spark-free manner. The charger is designed to be spark-free, but caution is always advised.
- Polarity: So ṣaja rere (+) pọ clamp to the positive (+) battery terminal and the negative (-) charger clamp to the negative (-) battery terminal. The charger is polarity protected.
- Ge Agbara: Always disconnect the AC power from the charger before connecting or disconnecting the battery clamps.
- Awọn ọmọde ati awọn ohun ọsin: Pa ṣaja ati batiri mọ kuro lọwọ awọn ọmọde ati awọn ẹranko.
- Ohun elo ti o bajẹ: Ma ṣe ṣiṣẹ ṣaja ti o ba ti bajẹ ni ọna eyikeyi.
- Lilo inu ile: This charger is designed for indoor use. Do not expose to rain or excessive moisture.
3. Ọja Ipariview ati Awọn ẹya ara ẹrọ
Figure 3.1: Projecta 12V 8.0A 8-Stage Automatic Battery Charger with power cord and battery clamps.
Awọn ẹya pataki:
- Laifọwọyi ni kikun: Simply connect and forget without the risk of overcharging.
- Mẹjọ Stages: Once connected, the charger will do the rest whether you're charging or maintaining the battery to keep it ready for use.
- Spark-Free and Polarity Protected: Safe to use while the battery is still in the vehicle.
- Fused Wiring Harness: Quick connect fused wiring harness for permanent installation (BCWH).
- All Included: Comes with harness, battery clamps, and 9.84 ft (3m) extension cable.
4. Ohun ti o wa ninu Apoti
Figure 4.1: All components included with the Projecta Battery Charger.
Your Projecta PJ-AC080-2 Battery Charger package should contain the following items:
- Projecta 12V 8.0A 8-Stage Automatic Battery Charger Unit
- Batiri Clamps (Pupa fun Rere, Dudu fun Odi)
- Fused Wiring Harness with Ring Terminals (for permanent installation)
- 9.84 ft (3m) Extension Cable
- Afowoyi Olumulo (iwe-ipamọ yii)
5. Eto ati Asopọ
Before connecting the charger, ensure the battery terminals are clean and free of corrosion. Always connect the charger to the battery before plugging it into the AC power outlet.
- Mura Batiri naa: If the battery is in a vehicle, ensure the vehicle's ignition is off and all accessories are turned off. For marine applications, ensure the vessel is securely moored.
- So batiri Clamps:
- Sopọ awọn red positive (+) batiri clamp si awọn rere (+) ebute batiri.
- Sopọ awọn black negative (-) batiri clamp si awọn odi (-) ebute batiri.
Figure 5.1: Proper connection of the charger to a vehicle battery.
Nọmba 5.2: Alaye view of the positive (red) and negative (black) battery clamps.
- Optional Fused Wiring Harness: For permanent installation, connect the ring terminals of the fused wiring harness to the battery terminals (red to positive, black to negative). This allows for quick connection/disconnection of the charger unit.
Figure 5.3: The included fused wiring harness for permanent battery connection.
- Sopọ si Agbara AC: Once the battery connections are secure, plug the charger's AC power cord into a standard 120V AC wall outlet.
6. Awọn ilana Iṣiṣẹ
The Projecta PJ-AC080-2 is a fully automatic 8-stage charger. Once connected to the battery and power, it will automatically detect the battery type and condition, then proceed through the optimal charging cycle.
8-Stage Ilana gbigba agbara:
The charger employs a sophisticated 8-stage charging algorithm to ensure efficient and safe charging, extending battery life. The stages typically include:
- Ibanujẹ: Recovers sulphated batteries by applying pulse current.
- Ibẹrẹ Rirọ: Gently introduces current to the battery to prevent damage, especially for deeply discharged batteries.
- Idiyele pupọ: Charges the battery at its maximum rate (8.0A) until it reaches approximately 80% capacity.
- Gbigba: Charges the battery at a decreasing current to 100% capacity.
- Itupalẹ: Tests the battery to determine if it can hold a charge.
- Atunse: Applies a controlled overcharge to recondition and equalize the battery cells (if needed).
- Leefofo: Ṣetọju batiri naa ni vol ti o duro nigbagbogbotage, ready for use.
- Pulse Maintenance: Periodically pulses the battery to keep it optimally charged during long-term storage.
The charger's display will indicate the current voltage and charging status. No manual intervention is required during the charging process.
Jíjáde ẹ̀rọ amúṣẹ́jáde náà:
Lati ge asopọ ṣaja:
- Yọọ okun agbara AC kuro ni iṣan ogiri.
- Disconnect the negative (-) black clamp lati ebute batiri.
- Disconnect the positive (+) red clamp lati ebute batiri.
7. Itọju
Proper maintenance ensures the longevity and optimal performance of your Projecta battery charger.
- Ninu: Ge asopọ ṣaja kuro lati gbogbo awọn orisun agbara ṣaaju ki o to nu.asing pẹlu asọ, damp asọ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
- Ayẹwo USB: Regularly inspect the power cord, battery clamps, and all cables for any signs of damage, fraying, or corrosion. Do not use the charger if any cables are damaged.
- Ibi ipamọ: Store the charger in a cool, dry place when not in use. Keep it away from direct sunlight, excessive heat, and moisture.
- Awọn ibudo batiri: Ensure battery terminals are clean and free of corrosion before connecting the charger.
8. Laasigbotitusita
If you encounter issues with your Projecta battery charger, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Charger does not turn on or display is blank. | No AC power; loose connection; faulty outlet. | Check if the charger is securely plugged into a live AC outlet. Test the outlet with another device. Ensure all connections are firm. |
| Charger connected but not charging (no charging indicator). | Incorrect battery connection (reversed polarity); battery too deeply discharged; faulty battery. | Verify positive (+) and negative (-) connections are correct. The charger has polarity protection, which may prevent operation if reversed. For very deeply discharged batteries, the charger may take time to initiate. If the battery is severely damaged, it may not accept a charge. |
| Charger enters error mode or displays an error code. | Internal fault; short circuit; battery fault. | Disconnect the charger from both AC power and the battery. Wait a few minutes, then reconnect. If the error persists, the charger or battery may be faulty. Consult customer support. |
| Ṣaja n gbona nigba isẹ. | Iṣiṣẹ deede; ategun ti ko dara. | It is normal for the charger to get warm during charging. Ensure adequate ventilation around the charger to prevent overheating. If it becomes excessively hot, disconnect immediately. |
9. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | PJ-AC080-2 |
| Iṣagbewọle Voltage | 120V AC (Standard US Outlet) |
| O wujade Voltage | 12 Volts (DC) |
| Gbigba agbara lọwọlọwọ | 8.0 Amps |
| Gbigba agbara Stages | 8-Stage Aifọwọyi |
| Awọn oriṣi batiri | Lead Acid Batteries (WET, MF, CA/CA, AGM, GEL, EFB, LiFePO4 compatible) |
| Ọja Mefa | 6.61 x 2.99 x 11.26 inches (16.8 x 7.6 x 28.6 cm) |
| Iwọn Nkan | 2.48 poun (1.13 kg) |
| Àwọ̀ | Dudu |
| Aabo Awọn ẹya ara ẹrọ | Spark-Free, Polarity Protected, Overcharge Protection |
10. Atilẹyin ọja ati Support
Projecta products are manufactured to high standards and undergo rigorous quality control. For specific warranty details, please refer to the warranty card included with your product or visit the official Projecta webojula.
If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your product, please contact Projecta Customer Support. Contact information can typically be found on the Projecta webaaye tabi lori apoti ọja.
Awọn orisun Ayelujara: For the latest information, FAQs, and product updates, please visit the official Projecta webojula: www.projecta.com.au (Akiyesi: Eyi jẹ aaye kan URL, Jọwọ tọka si awọn iwe ọja gangan fun atunṣe webaaye).