1. Ifihan
This manual provides essential information for the safe and effective operation of your TopTes TS-501B Sound Level Meter and TS-710 Light Meter. These devices are designed for accurate environmental monitoring, allowing users to measure noise levels and light intensity in various settings. Please read this manual thoroughly before use and retain it for future reference.
2. Ọja Ipariview
The TopTes TS-501B Sound Level Meter and TS-710 Light Meter are a combined solution for environmental assessment. The TS-501B measures sound levels, while the TS-710 measures light intensity, ambient temperature, and humidity. Both devices feature a 2.25-inch backlit LCD screen for clear readings and user-friendly functions.
2.1 TS-501B Sound Level Meter
The TS-501B is equipped with a 1/2 inch electric condenser microphone for precise sound measurement. It offers A/C weighting options to analyze sound based on human ear perception (A-weighting) or for general noise analysis (C-weighting). The measurement range is 30 to 130 dB.
Nọmba 1: TS-501B Sound Level Meter showing A-Weighting measurement. This mode measures sound levels as perceived by the human ear, typically ranging from 30 to 130 dBA.
Nọmba 2: TS-501B Sound Level Meter showing C-Weighting measurement. This mode is suitable for general noise analysis, with a range of 30 to 130 dBC.
Nọmba 3: Sun mo tipetipe view of the TS-501B's 1/2 inch Electric Condenser Microphone, protected by a windshield ball for high precision measurements.
2.2 TS-710 Light Meter
The TS-710 features a 180° rotating sensor for flexible light measurement from various directions. It measures light intensity from 0.1 to 200,000 lux (or 0.1 to 20,000 FC) and also provides readings for ambient temperature and humidity.
Nọmba 4: TS-710 Light Meter demonstrating its 180° rotating sensor, allowing detection of light from all directions.
Nọmba 5: TS-710 Light Meter with its easy-to-read 2.25-inch backlit LCD screen, showing current light, temperature, and humidity readings.
Nọmba 6: TS-710 Light Meter illustrating its capability for dual measurement units: LUX (0.1~200,000 LUX) and Foot-Candle (0.1~20,000 FC).
3. Alaye Aabo
Observe the following safety precautions to prevent injury and avoid damage to the devices:
- Do not attempt to open or modify the devices.
- Pa awọn ẹrọ naa mọ kuro ninu omi, ọriniinitutu giga, ati iwọn otutu to lagbara.
- Yago fun jisilẹ tabi fifi awọn ẹrọ si awọn ipa to lagbara.
- Remove batteries if the devices will not be used for an extended period.
- Sọ awọn batiri sọnu ni ibamu si awọn ilana agbegbe.
4. Package Awọn akoonu
Jẹrisi pe gbogbo awọn ohun kan wa ninu package:
- 1 x TopTes TS-710 Light Meter
- 1 x TopTes TS-501B Sound Level Meter
- 2 x Carrying Cases (one for each device)
- Awọn batiri AAA (ti a ti fi sii tẹlẹ tabi pẹlu lọtọ)
- Afowoyi Olumulo (iwe-ipamọ yii)
5. Eto
5.1 Fifi sori batiri
- Locate the battery compartment on the back of each device.
- Ṣii ideri batiri naa.
- Fi awọn batiri AAA sii, ni idaniloju polarity ti o pe (+/-).
- Pa ideri batiri naa ni aabo.
5.2 Titan / Pa a
Tẹ awọn Agbara button (usually marked with a power symbol) on each device to turn it on. Press and hold the same button to turn it off. Both devices feature an automatic power-off function to conserve battery life after a period of inactivity.
6. Awọn ilana Iṣiṣẹ
6.1 General Functions (Both Devices)
- Gbigbasilẹ Pupọ/IṢẸ́JÚ: Tẹ awọn MAX/MIN button to display the maximum or minimum recorded value during a measurement session. Press again to cycle through MAX, MIN, and current readings.
- Idaduro data: Tẹ awọn DIMU button (or similar icon) to freeze the current reading on the display. Press again to release.
- Imọlẹ ẹhin: Tẹ awọn Imọlẹ ẹhin button (often marked with a light bulb symbol) to activate or deactivate the screen backlight for improved visibility in low-light conditions.
Nọmba 7: Explanation of MAX and MIN functions. MAX displays the highest value measured, while MIN displays the lowest value measured over a given period.
6.2 TS-501B Sound Level Meter Operation
- Tan ẹrọ naa.
- Select Weighting (A/C): Tẹ awọn A/C button to switch between A-weighting (for human ear perception) and C-weighting (for general noise analysis).
- Select Response Time (FAST/SLOW): Tẹ awọn F/S button to choose between Fast (125ms) or Slow (1s) response times, depending on the nature of the sound being measured.
- Point the microphone towards the sound source. The current sound level in decibels (dB) will be displayed.
6.3 TS-710 Light Meter Operation
- Tan ẹrọ naa.
- Rotate Sensor: Adjust the 180° rotating sensor to face the light source directly or to capture ambient light as needed.
- Select Unit (LUX/FC): Tẹ awọn UNIT button to switch between Lux and Foot-Candle measurement units.
- The device will display the light intensity, ambient temperature, and humidity.
7. Itọju
- Ninu: Use a soft, dry cloth to clean the device surfaces. Do not use abrasive cleaners or solvents. For the TS-710's light sensor, ensure it remains clean and free of dust for accurate readings.
- Ibi ipamọ: Store the devices in their protective carrying cases in a cool, dry place when not in use. Avoid areas with high humidity or extreme temperatures.
- Rirọpo Batiri: Replace batteries promptly when the low battery indicator appears on the display to ensure continuous accurate operation.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ naa ko ṣiṣẹ. | Awọn batiri kekere tabi okú; polarity batiri ti ko tọ. | Rọpo awọn batiri pẹlu awọn tuntun; rii daju pe o peye polarity. |
| Awọn kika ti ko pe. | Sensor obstruction (TS-710); microphone obstruction (TS-501B); environmental interference. | Clean the sensor/microphone; ensure no obstructions; re-measure in a stable environment. |
| Ifihan ti wa ni baibai tabi òfo. | Batiri kekere; backlight pa. | Replace batteries; press the backlight button. |
| Automatic power-off occurs too quickly. | Default auto-off setting. | This is a feature to conserve battery. Refer to specific device settings if adjustable (not all models allow adjustment). |
9. Awọn pato
9.1 TS-501B Sound Level Meter
- Iwọn Iwọn: 30 si 130 dB
- Iwọn iwuwo: A/C
- Gbohungbohun: 1/2 inch Electric Condenser Microphone
- Ifihan: 2.25-inch Backlit LCD
- Awọn iṣẹ: MAX/MIN recording, Data Hold, Auto Power-Off
9.2 TS-710 Light Meter
- Light Measurement Range: 0.1 to 200,000 Lux / 0.1 to 20,000 FC
- Sensọ: 180° Rotating Sensor
- Awọn wiwọn afikun: Iwọn otutu ibaramu, ọriniinitutu
- Ifihan: 2.25-inch Backlit LCD
- Awọn iṣẹ: MAX/MIN recording, Data Hold, Auto Power-Off
10. Atilẹyin ọja ati Support
TopTes products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the TopTes official website or your purchase documentation. Please have your model numbers (TS-501B, TS-710) and purchase date available when contacting support.