ECD Germany 2.5T Hydraulic Car Jack (Model IP-2150) Instruction Manual

Ọrọ Iṣaaju

This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your ECD Germany 2.5T Hydraulic Car Jack. Please read this manual thoroughly before operation to ensure proper handling and to prevent personal injury or damage to property.

Awọn Itọsọna Aabo pataki

IKILO: Failure to follow these instructions may result in serious injury or death. Always prioritize safety when operating lifting equipment.

• Read Entire Manual: Understand all instructions and warnings before using this jack.
• Ti won won Agbara: Do not exceed the jack's rated capacity of 2.5 tons (2500 kg).
• Ilẹ Iduroṣinṣin: Always use the jack on a hard, level, and stable surface. Avoid soft ground or inclines.
• Iduroṣinṣin Ọkọ: Ensure the vehicle is in park (P), the ignition is off, and the parking brake is engaged. Block wheels that are not being lifted.
• Proper Lift Points: Only lift the vehicle at manufacturer-recommended lift points. Use the provided rubber pads to protect the vehicle's chassis.
• Awọn iduro atilẹyin: After lifting, immediately support the vehicle with appropriate jack stands. Never work under a vehicle supported only by a hydraulic jack.
• Ko Agbegbe kuro: Keep hands, feet, and other body parts clear of moving parts and the area under the vehicle.
• Lowering Slowly: Lower the vehicle slowly and carefully.
• Ayewo: Inspect the jack for damage or leaks before each use. Do not use if damaged.
• Awọn ọmọde ati Awọn Oluduro: Pa awọn ọmọde ati awọn eniyan laigba aṣẹ kuro ni agbegbe iṣẹ.

Package Awọn akoonu

Daju pe gbogbo awọn paati wa ati pe ko bajẹ lori ṣiṣi silẹ:

• 1 x ECD Germany 2.5T Hydraulic Car Jack
• 2 x Rubber Pads (for scratch and slip protection)
• 1 x SUV Adapter (for increased lift height)
• 1 x Pump Lever (operating handle)

Image: The hydraulic jack shown with its pump lever, two rubber pads, and an SUV adapter, as included in the package.

Awọn pato

Image: Detailed dimensions of the hydraulic jack, illustrating its minimum and maximum lift heights, and overall length.

Eto ati Igbaradi

1. Yọọ kuro: Carefully remove the jack and all accessories from the packaging.
2. Ṣayẹwo: Check the jack for any signs of damage or oil leaks that may have occurred during shipping. Do not use if damaged.
3. Imudani Ijọpọ: Insert the pump lever into the handle socket. Ensure it is securely seated.
4. Bleed Air (First Use): Before first use, it is recommended to bleed any air from the hydraulic system.
   • Yí fáìlì ìtúsílẹ̀ padà sí òdìkejì láti ṣí i pátápátá.
   • Pump the handle several times to expel any trapped air.
   • Tan àtọwọdá itusilẹ si ọna aago lati pa a.
5. So Awọn ẹya ara ẹrọ: Place a rubber pad on the saddle of the jack. If lifting an SUV or a vehicle requiring extra height, attach the SUV adapter on top of the rubber pad.

Image: Illustration of attaching the rubber pad and SUV adapter to the jack's saddle for proper vehicle contact and protection.

Awọn ilana Iṣiṣẹ

Gbigbe ọkọ ayọkẹlẹ kan:

1. Mura Ọkọ: Park the vehicle on a firm, level surface. Engage the parking brake and place the transmission in "Park" (automatic) or a low gear (manual). Block the wheels that will remain on the ground.
2. Ipo Jack: Locate the vehicle manufacturer's recommended lifting points. Position the jack directly under the designated lift point, ensuring the saddle with the rubber pad (and SUV adapter if needed) is centered and making full contact.
3. Pade Tu silẹ Àtọwọdá: Turn the pump lever clockwise until the release valve is fully closed. This prepares the jack for lifting.
4. Ọkọ̀ agbéga: Pump the handle up and down to raise the vehicle to the desired height. Lift only high enough to perform the necessary work.
5. Ni aabo pẹlu Jack Stands: Immediately place appropriately rated jack stands under the vehicle's designated support points. Lower the vehicle slowly until it rests securely on the jack stands. Never rely solely on the hydraulic jack for support.
6. Yọ Jack kuro: Once the vehicle is safely supported by jack stands, you can remove the hydraulic jack.

Image: The hydraulic jack correctly placed under a vehicle's designated lifting point, demonstrating proper positioning before lifting.

Sisọ ọkọ silẹ:

1. Gbé Díẹ̀ sókè: If the vehicle is on jack stands, pump the jack handle a few times to slightly raise the vehicle off the jack stands.
2. Yọ Awọn iduro Jack kuro: Fara balẹ̀ yọ àwọn ibi ìdúró ọkọ̀ kúrò lábẹ́ ọkọ̀ náà.
3. Ọkọ kekere: Slowly turn the pump lever counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you open the valve.
4. Fully Lower: Once the vehicle is fully lowered and resting on the ground, remove the jack from underneath.

Image: A visual guide to the jack's lifting and lowering mechanism, including how to insert the lever and open the drain valve for controlled descent.

Itoju

• Lubrication: Periodically lubricate all moving parts with light machine oil.
• Epo eefun: Check the hydraulic oil level regularly. If low, refill with high-quality hydraulic jack oil. Do not use brake fluid or other fluids.
• Ninu: Keep the jack clean and free of dirt, grease, and debris.
• Ibi ipamọ: Store the jack in a dry, clean place with the ram fully retracted to prevent corrosion and seal damage.
• Ayewo: Regularly inspect for wear, damage, or leaks. Any damaged parts must be replaced by qualified personnel.

Laasigbotitusita

Alaye atilẹyin ọja

The manufacturer provides a warranty for this product. Please refer to the warranty card included with your purchase or visit the official ECD Germany webAaye fun alaye atilẹyin ọja ofin ati ipo. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

The product specifications indicate that a manufacturer's warranty is provided.

Onibara Support

For technical assistance, spare parts, or warranty inquiries, please contact ECD Germany customer service. You can find contact information on the official ECD Germany webojula tabi nipasẹ rẹ alagbata.

Awọn orisun Ayelujara: Visit the ECD Germany Store on Amazon