1. Ifihan
The DJI Focus Pro LiDAR is an advanced ranging system designed to enhance autofocus capabilities for professional video production. It features a high density of ranging points and an extended maximum focus distance, making it suitable for various shooting scenarios, including those involving moving subjects and telephoto lenses. This device is compatible with DJI RS 4 Pro, DJI RS 3 Pro, and DJI Focus Pro Grip, and can enable autofocus for calibrated manual lenses when paired with the DJI Focus Pro Motor.
2. Ohun ti o wa ninu Apoti
Jẹrisi pe gbogbo awọn nkan wọnyi wa ninu package rẹ:
- Focus Pro LiDAR × 1
- Multi-Camera Control Cable (USB-C, 30 cm) × 1
3. Ọja Ipariview
The DJI Focus Pro LiDAR unit is a compact device designed for precise distance measurement and autofocus assistance. It features a front-facing lens for ranging and a hot shoe mount for attachment to compatible camera setups.
The rear of the unit includes various ports and controls for operation and connectivity.
4. Eto
To set up your DJI Focus Pro LiDAR, follow these steps:
- Iṣagbesori: Attach the LiDAR unit to your compatible DJI RS 4 Pro, DJI RS 3 Pro, or DJI Focus Pro Grip using its integrated hot shoe mount. Ensure it is securely fastened.
- Asopọmọra: Use the provided Multi-Camera Control Cable (USB-C, 30 cm) to connect the LiDAR to your stabilizer or grip. Refer to your stabilizer's manual for specific port locations.
- Agbara Tan: Power on your stabilizer or grip. The LiDAR unit will power on automatically.
5. Awọn ilana Iṣiṣẹ
The DJI Focus Pro LiDAR provides advanced autofocus capabilities. Here are key operational aspects:
- Ranging Performance: The LiDAR features 76,800 ranging points, significantly improving edge detection for human subjects and reducing focus hunting. It offers a maximum focus distance of 20 meters.
- Aaye ti View (FOV): The 70° FOV is optimized for capturing edge compositions and close-up shots, providing a wider area for focus detection.
- Oṣuwọn isọdọtun: A 30 Hz LiDAR refresh rate ensures rapid subject information collection, which is crucial for maintaining confident focus on moving subjects.
- Autofocus with Manual Lenses: When paired with the DJI Focus Pro Motor, the LiDAR can enable autofocus functionality for manual lenses that have undergone calibration.
- Focus Distance Extension (2x Zoom): By default, the LiDAR's ToF sensor operates within a 10-meter sensing range when the stabilizer's screen is in 1x mode. To extend the focus distance up to 20 meters, tap the '+' icon on the stabilizer's screen to activate the 2x zoom display mode.
6. Itọju
Proper maintenance ensures the longevity and optimal performance of your DJI Focus Pro LiDAR:
- Ninu: Use a soft, dry cloth to clean the exterior of the LiDAR unit. For the lens, use a specialized lens cleaning cloth and solution. Avoid abrasive materials or harsh chemicals.
- Ibi ipamọ: Store the LiDAR in a cool, dry place away from direct sunlight and extreme temperatures. Use a protective case when transporting the unit to prevent damage.
- Mimu: Yẹra fún kí ó má baà jábọ́ tàbí kí ó fa ìkọlù líle. Má ṣe gbìyànjú láti tú ẹ̀rọ náà ká, nítorí pé èyí yóò sọ àtìlẹ́yìn náà di òfo.
7. Laasigbotitusita
If you encounter issues with your DJI Focus Pro LiDAR, consider the following common solutions:
- LiDAR Not Powering On: Ensure the Multi-Camera Control Cable is securely connected to both the LiDAR and the stabilizer/grip. Verify that the stabilizer/grip is powered on and has sufficient battery.
- Aifọwọyi Ko Ṣiṣẹ: Check if the LiDAR is properly connected and recognized by your stabilizer. If using a manual lens, ensure it has been calibrated and that the DJI Focus Pro Motor is correctly installed and connected. Confirm that the autofocus mode is enabled on your stabilizer's screen.
- Inaccurate Focusing: Clean the LiDAR lens to ensure no obstructions are interfering with its ranging capabilities. Ensure there are no reflective surfaces directly in front of the LiDAR that could cause interference.
- Limited Focus Range: If experiencing a limited focus range (e.g., 10 meters), ensure the 2x zoom display mode is activated on your stabilizer's screen to extend the range to 20 meters.
If problems persist, contact DJI Support for further assistance.
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | 6941565981103 |
| Iwọn (D x W x H) | 3.84" x 2.66" x 2.21" |
| Iwọn Nkan | 140 giramu |
| Àwọ̀ | Schwarz (dudu) |
| Awọn ẹrọ ibaramu | DJI RS 4 Pro, DJI RS 3 Pro, DJI Focus Pro Grip |
| Ranging Points | 76,800 |
| Max Focus Distance | 20 mita |
| Aaye ti View (FOV) | 70° |
| LiDAR Refresh Rate | 30 Hz |
| Tesiwaju Iyara ibon | 30 FPS |
9. Atilẹyin ọja ati Support
The DJI Focus Pro LiDAR is covered by a warranty provided by DJI. For specific warranty terms and conditions, please refer to the official DJI webaaye tabi kaadi atilẹyin ọja ti o wa pẹlu ọja rẹ.
For technical support, troubleshooting assistance, or service inquiries, please visit the official DJI Support page or contact their customer service directly. Keep your proof of purchase and product serial number readily available when seeking support.
Atilẹyin Ayelujara: www.dji.com/support