Hikvision DS-2CD1043G2-LIU 4MP PoE IP Bullet Security Camera User Manual

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hikvision DS-2CD1043G2-LIU 4MP PoE IP Bullet Security Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation. Keep this manual for future reference.

Alaye Aabo

Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons. This includes, but is not limited to:

• Ensure the power source meets the camera's requirements (12V DC or PoE).
• Ma ṣe fi kamẹra han si awọn iwọn otutu to gaju, ọriniinitutu, tabi awọn agbegbe ibajẹ.
• Avoid direct exposure of the lens to strong light sources.
• Fifi sori yẹ ki o ṣe nipasẹ oṣiṣẹ oṣiṣẹ.
• Disconnect power before any maintenance or installation procedures.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn paati wa ninu package:

• Hikvision DS-2CD1043G2-LIU IP Bullet Camera
• Iṣagbesori skru ati odi plugs
• Asopọ omi fun okun nẹtiwọọki
• Quick Start Guide (this document serves as a detailed manual)
• Liluho awoṣe

Ọja Pariview

The Hikvision DS-2CD1043G2-LIU is a 4MP PoE IP bullet camera designed for outdoor surveillance. It features a 2.8mm fixed lens, IP67 weather resistance, and Night Color technology for enhanced low-light performance.

olusin 1: Apa view of the Hikvision DS-2CD1043G2-LIU camera with mounting bracket.

olusin 2: Iwaju view of the camera lens and sensor area.

Awọn eroja pataki:

• Lẹnsi: 2.8mm fixed lens for wide-angle viewing.
• IR/White Light LEDs: For night vision and supplemental lighting.
• Gbohungbohun: Fun igbewọle ohun.
• Ìbánisọ̀rọ̀ Nẹ́tíwọ́ọ̀kì (RJ45): Supports Power over Ethernet (PoE) and data transmission.
• Iṣagbewọle agbara: 12V DC power connector (if not using PoE).
• Iṣagbesori Akọmọ: Adjustable for various installation angles.

Ṣeto

1. Fifi sori ti ara

1. Yan Ibi Igbesoke: Yan ipo ita gbangba ti o yẹ ti o pese ohun ti o fẹ viewing angle and is within reach of network cabling. Ensure the surface is strong enough to support the camera.
2. Awọn iho iho: Lo àwòṣe ìlò tí a pèsè láti fi àmì sí àti lu àwọn ihò àgbékalẹ̀ fún àwọn skru ìfìkọ́lé.
3. Ṣe aabo kamẹra naa: Attach the camera's mounting bracket to the wall or ceiling using the supplied screws and wall plugs.
4. Ṣatunṣe Igun: Loosen the adjustment screws on the bracket to set the desired camera angle, then tighten them securely.

2. Nẹ́tíwọ́ọ̀kì àti Agbára Ìsopọ̀

The camera supports Power over Ethernet (PoE) for simplified installation, or a 12V DC power adapter (sold separately).

• Asopọmọra PoE: Connect an Ethernet cable from a PoE-enabled switch or NVR directly to the camera's RJ45 port. Use the waterproof connector to protect the connection if installed outdoors.
• 12V DC Power (Alternative): If not using PoE, connect a 12V DC power adapter to the camera's power input port and an Ethernet cable to the RJ45 port for data.

3. Iṣeto ni ibẹrẹ

1. Install SADP Tool: Download and install the Hikvision SADP (Search Active Devices Protocol) tool from the official Hikvision website on a computer connected to the same network as the camera.
2. Activate Camera: Run the SADP tool. It will detect the camera. Select the camera and set a strong password to activate it.
3. Tunto Awọn Eto Nẹtiwọọki: Assign a static IP address or enable DHCP for the camera. Ensure the IP address is compatible with your network.
4. Wiwọle nipasẹ Web Aṣàwákiri: Ṣii a web browser (e.g., Internet Explorer, Chrome) and enter the camera's IP address. Log in with the activated password to access the camera's web ni wiwo fun siwaju iṣeto ni.

Ṣiṣẹ

Gbe View ati Gbigbasilẹ

• Web Ni wiwo: After logging in, navigate to the "Live View" section to see the real-time video feed.
• NVR/DVR: If connected to a Hikvision NVR/DVR, the camera feed will be accessible through the recorder's interface.
• Gbigbasilẹ: Configure recording schedules, motion-triggered recording, or continuous recording via the web interface or NVR/DVR settings.

To ti ni ilọsiwaju Awọn ẹya ara ẹrọ

• Iwari išipopada: Set up motion detection zones and sensitivity. Configure actions such as recording, sending notifications, or triggering alarms.
• Night Vision (Night Color): The camera automatically switches to Night Color mode in low-light conditions, providing enhanced color images.
• Ohun: Enable and configure audio input/output settings if supported and connected.
• Eto Aworan: Adjust brightness, contrast, saturation, and other image parameters to optimize video quality.

Itoju

• Ninu: Regularly clean the camera lens with a soft, dry cloth. Do not use harsh detergents or abrasive materials.
• Awọn imudojuiwọn famuwia: Ṣayẹwo Hikvision osise website periodically for firmware updates. Always follow the provided instructions carefully when updating firmware to avoid damaging the device.
• Ayẹwo USB: Periodically inspect all cables and connections for wear, damage, or corrosion, especially for outdoor installations.

Laasigbotitusita

Awọn pato

Atilẹyin ọja

This Hikvision product comes with a 2-odun olupese ká atilẹyin ọja. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

For detailed warranty terms and conditions, please refer to the official Hikvision warranty policy available on their webojula tabi kan si atilẹyin alabara.

Atilẹyin

For technical assistance, product inquiries, or further support, please visit the official Hikvision website or contact their customer service department. You can typically find support resources, FAQs, and contact information on their global or regional webojula.

Osise Hikvision Webojula: www.hikvision.com