FOHERE Oscillating Tower Fan and Space Heater User Manual

Ọrọ Iṣaaju

Thank you for choosing the FOHERE Oscillating Tower Fan and Space Heater. This 2-in-1 appliance is designed to provide year-round comfort, offering both cooling fan and heating functions. Please read this manual thoroughly before use to ensure safe and optimal operation. Keep this manual for future reference.

Awọn Itọsọna Aabo pataki

Nigbati o ba nlo awọn ohun elo itanna, awọn iṣọra ipilẹ yẹ ki o tẹle nigbagbogbo lati dinku eewu ina, mọnamọna, ati ipalara si eniyan, pẹlu atẹle naa:

1. Ka gbogbo awọn ilana ṣaaju lilo ẹrọ ti ngbona/afẹfẹ yii.
2. This heater/fan is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater/fan. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater/fan and keep them away from the sides and rear.
3. Extreme caution is necessary when any heater/fan is used by or near children or invalids and whenever the heater/fan is left operating and unattended.
4. Always unplug heater/fan when not in use.
5. Do not operate any heater/fan with a damaged cord or plug or after the heater/fan malfunctions, has been dropped or damaged in any manner. Return heater/fan to authorized service facility for examination, electrical or mechanical adjustment, or repair.
6. Maṣe lo ni ita.
7. This heater/fan is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater/fan where it may fall into a bathtub or other water container.
8. Ma ṣe ṣiṣe okun labẹ capeti. Ma ṣe bo okùn pẹlu awọn rogi jiju, awọn asare, tabi awọn ibora ti o jọra. Ṣeto okun kuro ni agbegbe ijabọ ati nibiti kii yoo ṣe kọlu.
9. To disconnect heater/fan, turn controls to off, then remove plug from outlet.
10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater/fan.
11. Lati ṣe idiwọ ina ti o ṣeeṣe, maṣe dina awọn gbigbe afẹfẹ tabi eefi ni eyikeyi ọna. Ma ṣe lo lori awọn aaye rirọ, bii ibusun, nibiti awọn ṣiṣi le di dina.
12. A heater/fan has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
13. Use this heater/fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
14. Always plug heaters/fans directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
15. This heater/fan includes an Overheat Idaabobo feature. If the heater/fan overheats, it will automatically shut off. Unplug the heater/fan, wait 10 minutes for it to cool down, and then plug it back in.
16. The unit also features Italologo-Lori Idaabobo, automatically shutting off if accidentally knocked over.

Package Awọn akoonu

• 1 x FOHERE Tower Fan and Heater (Model NTH15-23ARL)
• 1 x Isakoṣo latọna jijin
• 1 x Itọsọna olumulo

Ọja Pariview

Ibi iwaju alabujuto

The control panel is located on the top of the unit. It features a digital display and touch-sensitive buttons for various functions.

• Bọtini Agbara (Titan/Pa): Yipada ẹyọ naa tan tabi pa.
• Bọtini Ipo (M): Cycles through fan modes (Normal/Sleep) or heater modes (Normal/ECO/Sleep).
• Timer Button (Clock icon): Ṣeto aago aifọwọyi lati wakati 1 si 12.
• Oscillation Button (Arrows icon): Ó ń mú iṣẹ́ ìṣiṣẹ́ náà ṣiṣẹ́ tàbí ó ń mú kí ó má ​​ṣiṣẹ́.
• Bọtini ECO: Activates the energy-saving ECO mode for heating.
• Temperature/Speed Adjustment (+/-): Adjusts temperature in heater mode or fan speed in fan mode.

Isakoṣo latọna jijin

The remote control allows for convenient operation from a distance. It duplicates most functions available on the main control panel.

Ṣeto

1. Ṣii silẹ: Carefully remove the unit from its packaging. Retain packaging for storage or future transport.
2. Ibi: Place the tower fan and heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the unit to allow for proper airflow and to prevent fire hazards. Do not place on soft surfaces like carpets or rugs that may block air intakes.
3. Asopọ agbara: Plug the power cord directly into a 120V AC, 60Hz electrical outlet. Do not use extension cords or power strips. The unit is designed for indoor use only.

Awọn ilana Iṣiṣẹ

Titan / Paa

• Tẹ awọn Bọtini agbara () on the control panel or remote to turn the unit on or off.

Switching Between Fan and Heater Modes

• Use the physical switch located at the bottom front of the unit to select between "Fan" and "Heater" modes.

Fan Mode isẹ

• Titunṣe Iyara Olufẹ: In Fan mode, press the + or - buttons to cycle through 3 fan speeds (Low, Medium, High).
• Awọn ipo Fan: Tẹ awọn Ipo (M) button to switch between Normal Fan mode and Sleep Fan mode. Sleep mode operates at a lower speed for quieter operation.

Heater Mode Operation

• Ṣatunṣe iwọn otutu: In Heater mode, press the + or - buttons to set the desired temperature between 59°F (15°C) and 95°F (35°C). The unit will automatically adjust its heating output to maintain the set temperature.
• Heater Modes: Tẹ awọn Ipo (M) button to cycle through Normal Heater mode, ECO Heater mode, and Sleep Heater mode.
  • Ipo deede: Provides continuous heating at the selected temperature.
  • Ipo ECO: The built-in sensor intelligently adjusts operating power based on room temperature to save energy.
  • Ipo orun: Operates at a lower heat setting and reduced fan speed for quieter operation during sleep.

Oscillation Išė

• Tẹ awọn Bọtini oscillation () to activate or deactivate the wide-angle oscillation feature, distributing air evenly across the room.

Aago Išė

• Tẹ awọn Bọtini Aago () to set the auto-off timer. Each press increases the timer by 1 hour, up to a maximum of 12 hours. The unit will automatically shut off once the set time has elapsed.

Itoju

Regular cleaning and maintenance will help prolong the life of your FOHERE Tower Fan and Heater.

1. Ṣaaju ki o to sọ di mimọ: Yọọ ẹyọ kuro nigbagbogbo lati iṣan agbara ati gba laaye lati tutu patapata ṣaaju ṣiṣe mimọ.
2. Ode Ninu: Mu ese ita gbangba pẹlu asọ, damp asọ. Ma ṣe lo awọn olutọpa abrasive tabi awọn olomi nitori wọn le ba ipari jẹ.
3. Gbigbe / Ijade: Use a vacuum cleaner with a brush attachment to gently remove dust and debris from the air intake and outlet grilles. Do not attempt to disassemble the unit for cleaning.
4. Ibi ipamọ: If storing the unit for an extended period, clean it thoroughly, then place it back in its original packaging and store in a cool, dry place.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

FOHERE products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official FOHERE website. Please have your model number (NTH15-23ARL) ready when contacting support.

For additional information and product registration, visit: FOHERE Official Store