JBL PartyBox On-The-Go Speaker and Vibe Beam Headphones User Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the safe and effective use of your JBL PartyBox On-The-Go portable Bluetooth speaker and JBL Vibe Beam True Wireless Headphones. Please read this manual thoroughly before operating your devices and retain it for future reference.

Ohun ti o wa ninu Apoti

Carefully unpack all items and ensure the following are present:

JBL PartyBox On-The-Go Speaker
JBL Wireless Microphone
Carrying Strap with Bottle Opener
Okun agbara
JBL Vibe Beam True Wireless Headphones (Left and Right earbuds)
JBL Vibe Beam Charging Case
USB-C Charging Cable for Vibe Beam
Multiple sizes of ear tips for Vibe Beam
Quick Start Guide and Safety Sheet for both products

JBL PartyBox On-The-Go speaker with wireless microphone

Image: JBL PartyBox On-The-Go speaker shown with its included wireless microphone.

JBL Vibe Beam True Wireless Headphones in charging case

Image: JBL Vibe Beam True Wireless Headphones resting inside their charging case.

JBL PartyBox On-The-Go Setup

1. Gbigba agbara Agbọrọsọ

Before first use, fully charge the PartyBox On-The-Go. Connect the power cable to the speaker's power input and then to a power outlet. The battery indicator will show charging status. A full charge takes approximately 3.5 hours.

2. Agbara lori / Paa

Tẹ awọn Bọtini agbara lori oke nronu lati tan tabi pa agbohunsoke.

3. Sisopọ Bluetooth

Turn on the PartyBox On-The-Go.
Tẹ awọn Bọtini Bluetooth lori oke nronu. Atọka Bluetooth yoo filasi, nfihan ipo sisopọ.
On your device (smartphone, tablet, etc.), enable Bluetooth and select "JBL PartyBox On-The-Go" from the list of available devices.
Ni kete ti a ti sopọ, Atọka Bluetooth yoo tan bulu ti o lagbara.

4. Ìsopọ̀ Gbohungbohun

Insert the wireless microphone's receiver into the microphone input on the speaker. The microphone will automatically connect. Adjust microphone volume and echo using the dedicated knobs on the speaker's top panel.

JBL PartyBox On-The-Go speaker with shoulder strap

Image: JBL PartyBox On-The-Go speaker shown with its detachable shoulder strap attached.

JBL PartyBox On-The-Go Operating Instructions

1. Sisisẹsẹhin Orin

Bluetooth: Play music from your paired device. Use the volume controls on the speaker or your device.
USB: Fi okun USB sii pẹlu ohun files sinu USB ibudo. Agbọrọsọ yoo mu orin ṣiṣẹ laifọwọyi lati inu kọnputa.
AUX: Connect an audio device using a 3.5mm AUX cable to the AUX input.

2. Iṣakoso Ifihan Imọlẹ

Tẹ awọn Light Show bọtini to cycle through different light patterns or turn the light show off. The lights sync to the music.

3. Bass didn

Tẹ awọn Bass didn bọtini to enhance the bass output. Press again to turn it off.

4. Ìsopọ̀ Sitẹrio Alailowaya Otitọ (TWS)

You can connect two JBL PartyBox On-The-Go speakers together for a stereo sound experience:

Rii daju pe awọn agbohunsoke mejeeji ti wa ni titan.
Lori agbọrọsọ kan, tẹ mọlẹ TWS bọtini for 5 seconds. It will emit a pairing tone.
Repeat this step on the second speaker.
The speakers will connect automatically. The TWS indicator will glow solid on both speakers.

5. Using the Microphone and Instrument Input

Adjust the microphone volume and echo using the dedicated knobs. You can also connect an instrument (e.g., guitar) to the instrument input and adjust its volume independently.

JBL PartyBox On-The-Go speaker rear view pẹlu gbohungbohun

Aworan: Ẹyin view of the JBL PartyBox On-The-Go speaker, showing input ports and the wireless microphone.

JBL Vibe Beam Headphones Setup

1. Ngba agbara si awọn Agbekọri ati Case

Place the earbuds into the charging case. Connect the USB-C cable to the case and then to a power source. The LED indicators on the case will show the charging status. The earbuds and case can be charged simultaneously.

2. Ibẹrẹ Ibẹrẹ

Ṣii apoti gbigba agbara. Awọn agbekọri yoo tẹ ipo isọpọ sii laifọwọyi.
On your device, enable Bluetooth and select "JBL Vibe Beam" from the list of available devices.
Ni kete ti a ti sopọ, awọn agbekọri yoo tọka si isọdọkan aṣeyọri.

3. Wọ awọn Agbekọri

Insert the earbuds into your ears and gently twist them to find a comfortable and secure fit. Experiment with the different ear tip sizes to achieve optimal sound quality and comfort.

JBL Vibe Beam True Wireless Headphones in open charging case

Image: JBL Vibe Beam True Wireless Headphones in their open charging case, showing the earbuds and charging indicators.

JBL Vibe Beam Headphones Operating Instructions

1. Awọn iṣakoso ifọwọkan

The Vibe Beam headphones feature touch controls on each earbud:

Tẹ ni kia kia Mu orin ṣiṣẹ/Daduro, Dahun/Pari ipe.
Tẹ lẹẹmeji: Skip forward (right earbud), Skip backward (left earbud), Reject call.
Meteta Tẹ ni kia kia: Mu oluranlọwọ ohun ṣiṣẹ.
Fọwọ ba Mu: Volume control (customizable via JBL Headphones App).

2. VoiceAware

During calls, VoiceAware allows you to control how much of your own voice you hear through the earbuds, enhancing call clarity and comfort. This feature can be adjusted via the JBL Headphones App.

3. Single Earbud Use

Either earbud can be used independently. Simply remove one earbud from the case, and it will automatically connect to your device if already paired.

JBL Vibe Beam True Wireless Headphones, individual earbuds

Aworan: Isunmọ view of the two JBL Vibe Beam True Wireless Headphones earbuds.

Itoju

1. Ninu

PartyBox On-The-Go: Nu agbọrọsọ nu pẹlu asọ, damp cloth. Do not use abrasive cleaners or immerse the speaker in water.
Vibe Beam Headphones: Gently clean the earbuds and charging case with a dry, soft, lint-free cloth. Remove ear tips and clean them with mild soap and water, then dry thoroughly before reattaching.

2. Ibi ipamọ

Store both products in a cool, dry place away from direct sunlight and extreme temperatures. For the Vibe Beam headphones, always store them in their charging case when not in use.

3. Itọju batiri

To prolong battery life, fully charge the devices at least once every 3 months if not used regularly. Avoid completely draining the battery frequently.

4. Omi ati Eruku Resistance

The JBL PartyBox On-The-Go is IPX4 splash-proof, meaning it can withstand splashes of water but should not be submerged.
The JBL Vibe Beam earbuds are IP54 certified (dust and splash resistant), and the charging case is IPX2 (drip resistant). Ensure the charging port covers are securely closed before exposure to water or dust.

Laasigbotitusita

JBL PartyBox Lori-The-Go

Ko si Agbara: Rí i dájú pé a ti gba agbára sí agbọrọsọ náà tàbí a ti so mọ́ ibi tí agbára ń gbé e sí.
Ko si Ohun: Check volume levels on both the speaker and your connected device. Ensure the correct input source is selected.
Awọn oran Isopọpọ Bluetooth: Ensure the speaker is in pairing mode. Turn off and on Bluetooth on your device, then try pairing again. Clear previous pairings from your device's Bluetooth list.
Gbohungbohun Ko Ṣiṣẹ: Ensure the microphone receiver is fully inserted and the microphone is powered on (if applicable). Check microphone volume.

JBL Vibe Beam Headphones

No Sound from one earbud: Place both earbuds back in the charging case, close the lid, then reopen and try again. Ensure both earbuds are charged.
Awọn oran Isopọpọ: Ensure the earbuds are in pairing mode (open case). Turn off and on Bluetooth on your device. Forget "JBL Vibe Beam" from your device's Bluetooth list and re-pair.
Ekọti ko gba agbara: Ensure the charging contacts on the earbuds and in the case are clean and dry.

Awọn pato