CYCPLUS L7 Bike Radar Tail Light User Manual

1. Ifihan

The CYCPLUS L7 Bike Radar Tail Light is an advanced safety device designed to enhance cycling visibility and awareness. It features precise radar sensing to detect approaching vehicles, intelligent brake sensing, and multiple light modes. With a long-lasting rechargeable battery and IPX6 waterproof rating, it is suitable for various cycling conditions and scenarios, ensuring a safer riding experience.

2. Package Awọn akoonu

Ṣaaju fifi sori ẹrọ, rii daju pe gbogbo awọn eroja wa:

• CYCPLUS L7 Radar Tail Light Main Unit
• Lanyard
• Short Rubber Strap
• Long Rubber Strap
• Okun gbigba agbara (USB-C)
• Seat Tube Mount
• Gàárì, Òkè
• Seat Post Rubber Pad 1
• Seat Post Rubber Pad 2
• Screwdriver (Hex Key)

Figure 2.1: All components included in the CYCPLUS L7 Radar Tail Light package.

3. fifi sori

The CYCPLUS L7 offers two primary installation methods: mounting to the seat rail or to the seat post. Ensure the tail light is mounted vertically to the ground for optimal radar performance.

3.1. Mounting to the Seat Rail

1. Match the slope of the seat rail mounting bracket base plate to the slope of your bicycle's seat rail.
2. Raise one end of the seat rail mounting bracket panel and attach it to the seat rail.
3. Interchange the left and right screws, then insert them into the slots. For carbon fiber seat rails, tighten to approximately 4N-m. Over-tightening may damage the seat rail.
4. Adjust the angle of the mount and tighten the screws securely.
5. Install the tail light main unit onto the mount. It is recommended to install the lanyard to prevent the tail light from being lost.
6. Ensure the base of the tail light remains perpendicular to the ground (90-degree angle) to avoid the radar detecting objects too close or inaccurately.

Figure 3.1: Attaching the seat rail mount.

Figure 3.2: Installing the tail light main unit onto the seat rail mount.

3.2. Mounting to the Seat Post

1. Select the appropriate rubber pad (Pad 1 or Pad 2) based on the shape of your bicycle's seat post (e.g., round, aero).
2. Attach the selected rubber pad to the seat post mount.
3. Secure the rubber strap tightly on one side of the mount and then wrap it around the seat post, securing the other end.
4. Install the tail light main unit onto the mount. It is recommended to install the lanyard to prevent the tail light from being lost.
5. Ensure the base of the tail light remains perpendicular to the ground (90-degree angle) to avoid the radar detecting objects too close or inaccurately.

Figure 3.3: Choosing the correct seat post pad.

Figure 3.4: Securing the seat post mount.

Figure 3.5: Installing the tail light main unit onto the seat post mount.

4. Awọn ilana Iṣiṣẹ

4.1. Títan/Pápá àti Yíyípadà Ipò

To power on the device, long press the button located on the tail light. To switch between light modes, short press the button. The available modes include:

• Constant Mode 1
• Constant Mode 2
• Ipo paju
• Ipo Mimi
• Radar Only Mode (via App)
• Off Mode (short press after cycling through all modes)

The device will automatically enter sleep mode after 3 minutes of inactivity and wake up upon movement, conserving battery life.

Figure 4.1: CYCPLUS L7 Tail Light overview with indicator and button.

Figure 4.2: Various light modes available on the L7.

4.2. Connecting to Bike Computer / App

The CYCPLUS L7 supports ANT+ and Bluetooth 5.0 protocols, allowing connection to compatible smartphones, bike computers, and smartwatches that support tail light functions.

• Bike Computer Connection: Refer to your bike computer's manual for sensor pairing. Typically, you will navigate to the 'Sensors' or 'Add Device' menu and select 'Radar' or 'Lights'. The L7 should appear as a discoverable device.
• CYCPLUS APP Connection: Download the official CYCPLUS APP. Open the app and search for the L7 device. Once connected, you can adjust light brightness, switch modes, and enable/disable the radar function. The indicator light on the L7 will show its status: constant on when radar is enabled, slow flash when radar is disabled.

Figure 4.3: Wide compatibility with various devices.

5. Key Awọn ẹya ara ẹrọ

• Excellent Distance & Velocity Monitoring: Detects rear vehicles up to 175 yards (160 meters) at a relative velocity of 6-160 km/h in real-time. Automatically flashes to warn rapidly approaching vehicles.
• Superior Visibility & 40° Detection Angle: Maximizes visibility up to a 270° angle. The 40° detection angle helps detect vehicles at corners or blind spots, providing early alerts.
• Igbesi aye batiri ti o gbooro sii: Equipped with a 2000mAh rechargeable battery, offering up to 36 hours of usage on a full charge. A built-in power indicator lights up red when battery capacity is below 30%.
• 4 Preset Light Modes & IPX6 Waterproof: Features Constant Mode (x2), Blinking Mode, and Breathing Mode. Settings can be modified via the CYCPLUS APP. IPX6 waterproof rating ensures durability in various weather conditions.
• Intelligent Brake Detection & Auto On/Off: Triggers a brake light to notify trailing vehicles during deceleration or sudden braking, reducing collision risk. Enters sleep mode after 3 minutes of inactivity and automatically wakes up upon movement.
• Support ANT+ & Bluetooth 5.0 Protocols: Compatible with smartphones, bike computers, and smartwatches that support tail light functions.

Figure 5.1: The CYCPLUS L7 Radar Tail Light.

Figure 5.2: Visibility and detection range of the L7.

Figure 5.3: Automatic sleep and wake-up feature.

6. Itọju

• Ninu: Nu ẹrọ naa pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
• Gbigba agbara: Charge the device using the provided USB-C cable. Ensure the charging port is dry before connecting the cable. Avoid overcharging.
• Ibi ipamọ: Store the device in a cool, dry place when not in use. If storing for an extended period, charge the battery to approximately 50% every few months to maintain battery health.
• Omi Resistance: The device has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. However, it is not designed for submersion. Ensure the charging port cover is securely closed during use in wet conditions.

7. Laasigbotitusita

8. Awọn pato

Figure 8.1: Detailed specifications of the L7 Radar Tail Light.

9. Atilẹyin ọja ati Support

The CYCPLUS L7 Radar Tail Light comes with a 1-odun lopin atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn iṣelọpọ ati awọn abawọn ohun elo labẹ lilo deede.

For technical support, warranty claims, or any inquiries regarding your product, please contact CYCPLUS customer service through the official website or the contact information provided in your product packaging. Please have your purchase receipt and product model number (L7) ready when contacting support.