Ọrọ Iṣaaju
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new Portable Tire Inflator. Please read this manual thoroughly before using the device and retain it for future reference.
Awọn Itọsọna Aabo
- Rii daju pe ẹrọ naa ti gba agbara ni kikun ṣaaju lilo.
- Do not operate the inflator near flammable liquids or gases.
- Jeki kuro ni arọwọto awọn ọmọde.
- Do not over-inflate tires; always refer to the vehicle's recommended tire pressure.
- Avoid continuous operation for extended periods to prevent overheating. Allow the device to cool down if it becomes hot.
- Ma ṣe tuka tabi yi ẹrọ naa pada.
- Store in a dry place away from direct sunlight and extreme temperatures.
Package Awọn akoonu
- Inflator Tire to ṣee gbe
- Ifowosowopo Tube
- Okun Ngba agbara USB
- 4 x Nozzles (for car, bike, ball, swimming ring)
Image: The portable tire inflator unit shown with its included accessories: an inflation hose, a USB charging cable, and four different nozzle adapters for various inflation needs.
Ọja Pariview
Familiarize yourself with the components of your tire inflator:
- Ifihan Digital: Shows current pressure, target pressure, and battery level.
- Pressure Unit Button (R): Short press to switch between BAR/PSI/KPA/KG/CM^2. Long press to turn off.
- +/- Awọn bọtini: Adjust target pressure.
- Bọtini agbara: Start/stop inflation.
- Imọlẹ LED: Pese itanna ni awọn ipo ina kekere.
- Ibudo Afikún-owo: Where the inflation tube connects.
- Ibudo Gbigba agbara USB: Fun gbigba agbara ẹrọ naa.
Aworan: A alaye view of the inflator's digital display, highlighting the pressure unit switch button (R) and the plus/minus buttons for adjusting the preset pressure.
Ṣeto
- Idiyele Ibẹrẹ: Before first use, fully charge the inflator using the provided USB cable. The digital display will indicate charging status. A full charge takes approximately 3-4 hours.
- Attach Inflation Tube: Screw the inflation tube securely into the inflation port on the device.
Awọn ilana Iṣiṣẹ
General Inflation Steps:
- Sopọ̀ mọ́ àfọ́fà Táyà: Screw the inflation tube's nozzle onto the tire valve stem. Ensure a tight connection to prevent air leakage.
- Agbara Tan: The device typically powers on automatically when the inflation tube is connected or by pressing any button.
- Yan Ẹka Ipa: Short press the "R" button to cycle through pressure units (BAR, PSI, KPA, KG/CM^2) until your desired unit is displayed.
- Ṣeto Ipa Ibi-afẹde: Use the "+" and "-" buttons to adjust the target pressure to the recommended value for your item (e.g., vehicle tire, bicycle tire, sports ball).
- Ibẹrẹ Iṣeduro: Press the power button to begin inflation. The digital display will show the current pressure increasing.
- Pipa-Adaaṣe: The inflator will automatically stop when the preset target pressure is reached.
- Ge asopọ: Unscrew the inflation tube from the valve stem.
- Agbara Pa: Long press the "R" button to turn off the inflator.
Image: A step-by-step visual guide demonstrating the easy operation of the tire inflator, including connecting the hose, setting pressure, starting inflation, and the automatic shut-off feature.
Lilo Imọlẹ LED:
The built-in LED light can be activated to provide illumination during low-light conditions or nighttime use. Refer to the device's specific button for light activation (often a dedicated button or a long press of the power button).
Image: The tire inflator in use, with its integrated LED light illuminating the tire valve area, demonstrating its utility for nighttime or low-light inflation.
Using Different Nozzles:
The inflator comes with 4 extra nozzles for various applications:
- Needle Nozzle: For sports balls (e.g., basketballs, footballs).
- Tapered Nozzles: For inflatable toys, swimming rings, and other low-pressure inflatables.
Attach the appropriate nozzle to the inflation tube before connecting to the item to be inflated.
Image: An illustration detailing the four preset inflation modes available on the device, showing recommended PSI levels for car tires (36 PSI), motorcycles (33 PSI), bicycles (30 PSI), and balls (8 PSI).
Itoju
- Ninu: Mu ese ita ti inflator pẹlu asọ, damp asọ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
- Ibi ipamọ: Store the inflator and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the inflation tube is neatly coiled.
- Itọju Batiri: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device periodically if not used for a long time.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Inflator ko ni tan-an. | Low battery; Device not activated. | Charge the battery; Press the power button or connect the hose. |
| Afẹfẹ n jo lakoko afikun. | Hose not securely connected; Valve stem issue. | Ensure hose is tightly screwed onto valve; Check valve stem for damage. |
| Inflator duro ṣaaju ki o to de titẹ ibi-afẹde. | Battery low; Overheating protection activated. | Recharge battery; Allow device to cool down for 10-15 minutes. |
| Kika titẹ ti ko pe. | Incorrect pressure unit selected. | Press "R" button to switch to desired pressure unit. |
| Ẹrọ n pariwo. | Normal operation; Obstruction in air intake. | Some noise is normal. Check for any blockages in air vents. |
Awọn pato
- Orukọ awoṣe: ST-5007
- Iwọn Iṣiṣẹ ti o pọju: 150 PSI
- Agbara Sisan Afẹfẹ: 12 L / Min
- Batiri: 2 * 2000 mAh high-density USB rechargeable Lithium-ion batteries (included)
- Akoko gbigba agbara: 3-4 wakati
- Akoko Ilọsiwaju: Approximately 30 minutes (on full charge)
- Iṣagbewọle Voltage: 12V (from internal battery)
- Ipele Ariwo: 10 dB (as per specification, though typical operating noise might be higher)
- Ìwọ̀n Nkan: 1.26 iwon
- Awọn iwọn: 8.39 x 6.26 x 2.64 inches (Awọn iwọn idii)
Atilẹyin ọja & Atilẹyin
Ọja yi wa pẹlu kan 1-odun atilẹyin ọja from the date of purchase. For warranty claims, technical support, or any inquiries, please contact the seller or manufacturer through your purchase platform.
Jọwọ ṣe idaduro ẹri rira rẹ fun ijẹrisi atilẹyin ọja.
