EDM Portable Air Conditioner Model 33516 User Manual

Ọrọ Iṣaaju

Thank you for choosing the EDM Portable Air Conditioner Model 33516. This manual provides important information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before use and keep it for future reference.

Awọn Itọsọna Aabo pataki

• Ka gbogbo awọn ilana ṣaaju lilo ohun elo naa.
• Rii daju voltage indicated on the rating label matches your main power supply.
• Maṣe fi ohun elo, okun, tabi pulọọgi sinu omi tabi awọn olomi miiran.
• Ṣe abojuto awọn ọmọde lati rii daju pe wọn ko ṣere pẹlu ohun elo.
• Yọọ pulọọgi kuro ni ijade nigbati ko si ni lilo ati ṣaaju ṣiṣe mimọ.
• Ma ṣe ṣiṣẹ ohun elo eyikeyi pẹlu okun tabi pulọọgi ti o bajẹ, tabi lẹhin aiṣe ohun elo tabi ti bajẹ ni eyikeyi ọna.
• Maṣe lo ni ita.
• Maṣe dina awọn ṣiṣi afẹfẹ.
• Gbe ẹyọ naa sori iduro, dada alapin.
• Only use clean water in the water tank.

Ọja Pariview

The EDM Portable Air Conditioner Model 33516 is a compact evaporative air cooler designed for personal and ambient climate control. It features a removable water tank, three speed settings, and integrated wheels for easy mobility.

Nọmba 1: Iwaju view of the EDM Portable Air Conditioner Model 33516. The unit is white and grey, with a front grille, control panel on top, and casters at the base.

Awọn eroja:

• Pánẹ́lì Ìṣàkóso (Òkè)
• Grille Afẹfẹ (Iwaju)
• Water Tank (Bottom, removable)
• Casters (Base)
• Power Cord (Rear)
• Air Inlet Filter (Rear/Side)

Awọn ilana iṣeto

1. Unpacking ati Placement

1. Fi ìṣọ́ra yọ afẹ́fẹ́ inú àpótí rẹ̀ kúrò.
2. Gbe ẹyọ naa sori ilẹ ti o duro, ipele ipele. Rii daju pe o kere ju 20 cm (inṣi 8) ti aaye ti o han gbangba ni ayika ẹyọ naa fun ṣiṣan afẹfẹ to dara.

2. Kun Omi Omi

For cooling and humidification, the water tank must be filled with clean water.

1. Gently pull out the water tank from the bottom of the unit.
2. Kun ojò pẹlu mọ tẹ ni kia kia omi. Maṣe kọja laini kikun "MAX".
3. Carefully slide the water tank back into the unit until it clicks into place. Ensure it is securely seated to prevent leaks.

Nọmba 2: The removable water tank located at the bottom of the unit, shown partially pulled out for filling or cleaning.

3. Using Ice Packs (Optional)

For enhanced cooling, you can use the provided ice packs (or standard ice cubes) in the water tank.

1. Freeze the ice packs thoroughly before use.
2. After filling the water tank (as described above), place the frozen ice packs directly into the water tank.
3. Pa ojò omi naa ni aabo.

Nọmba 3: Top left shows two blue ice packs next to the open water tank. These can be placed in the tank for colder air.

Awọn ilana Iṣiṣẹ

Ensure the unit is plugged into a 220-240V power outlet before operation.

Nọmba 4: Close-up of the control panel. Buttons include 'Swing ON/OFF', 'OFF', 'LOW', 'MID', 'HIGH' for fan speed, and 'Cool ON/OFF'.

Awọn iṣẹ igbimọ Iṣakoso:

• PA: Yipada kuro.
• LOW / MID / HIGH: Selects the desired fan speed.
• Swing ON/OFF: Activates or deactivates the automatic oscillation of the air outlet louvers.
• Cool ON/OFF: Ó ń mú iṣẹ́ ìtútù tí ń jáde láti inú èéfín ṣiṣẹ́ tàbí ó ń mú kí ó má ​​ṣiṣẹ́. Iṣẹ́ yìí nílò omi nínú àpò omi náà.

Isẹ ipilẹ:

1. Agbara Tan: Press any of the speed buttons (LOW, MID, HIGH) to turn on the fan.
2. Ṣatunṣe Iyara Fan: Press the desired speed button (LOW, MID, HIGH).
3. Mu Itutu agbaiye ṣiṣẹ: Press the "Cool ON/OFF" button. The unit will begin evaporative cooling. Ensure the water tank is filled.
4. Mu Swing ṣiṣẹ: Press the "Swing ON/OFF" button to enable the automatic oscillation of the air louvers. Press again to stop.
5. Agbara Pa: Press the "OFF" button to turn off the unit.

Itoju

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your air conditioner.

1. Ninu Ode

• Yọọ kuro ni gbogbo igba ṣaaju ṣiṣe mimọ.
• Mu ese ita gbangba pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
• Rí i dájú pé omi kò wọ inú pánẹ́ẹ̀lì ìṣàkóso tàbí àwọn ohun èlò iná mànàmáná mìíràn.

2. Ninu Omi Omi

• Yọọ kuro.
• Pull out the water tank (refer to Figure 2).
• Sofo eyikeyi omi ti o ku.
• Nu ojò naa pẹlu ifọsẹ kekere kan ki o fi omi ṣan daradara pẹlu omi mimọ.
• Allow the tank to air dry completely before reinserting it into the unit.
• Nu ojò omi nigbagbogbo (fun apẹẹrẹ, osẹ-sẹsẹ) lati ṣe idiwọ mimu ati idagbasoke imuwodu.

3. Cleaning the Air Filter (Evaporative Pad)

The air filter/evaporative pad is located behind the rear grille. It should be cleaned periodically.

• Yọọ kuro.
• Remove the rear grille (consult diagram if available, or gently unclip).
• Carefully remove the evaporative pad.
• Rinse the pad under running water to remove dust and mineral deposits. For heavy deposits, soak in a mild descaling solution (e.g., vinegar and water) before rinsing.
• Allow the pad to air dry completely before reinserting.
• Reattach the rear grille.

4. Ibi ipamọ

• If the unit will not be used for an extended period, empty and clean the water tank and evaporative pad thoroughly.
• Ensure all parts are dry.
• Tọju ẹyọ naa ni itura, aye gbigbẹ, ni pataki ninu apoti atilẹba rẹ.

Laasigbotitusita

Ti iṣoro naa ba wa lẹhin ṣiṣe ayẹwo awọn aaye wọnyi, jọwọ kan si atilẹyin alabara.

Awọn pato

Nọmba 5: Dimensional drawing of the unit, showing approximate measurements of 24 cm (depth), 26 cm (width), and 57 cm (height).

Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the warranty card included with your product or contact your retailer. Keep your proof of purchase for any warranty claims.