FIDECO Magnetic M.2 2230 NVMe SSD Enclosure User Manual

1. Ifihan

This manual provides detailed instructions for the FIDECO Magnetic M.2 2230 NVMe SSD Enclosure. This device allows you to expand storage and transfer data at high speeds between various compatible devices, including iPhone 15 series and above, MacBooks, iPad Pros, and Android devices. Its magnetic design ensures secure attachment to MagSafe-compatible phones.

The enclosure supports M.2 NVMe SSDs of size 2230 (M-Key or M+B Key) and utilizes USB 3.2 Gen 2 for data transfer speeds up to 10Gbps. It is designed for plug-and-play operation across Windows, Mac OS, and Linux operating systems.

Image 1.1: FIDECO Magnetic M.2 2230 NVMe SSD Enclosure.

2. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• 1x FIDECO NVMe SSD Enclosure
• 1x USB-C si okun USB-C
• 1x Silicone Thermal Pad
• 1x Screwdriver with Screws
• 1x Itọsọna olumulo

Image 2.1: Package contents including the enclosure, cable, thermal pad, screwdriver, and manual.

3. Awọn pato

Image 3.1: The enclosure supports M.2 NVMe 2230 SSDs (M-Key or M+B Key) only.

4. Eto

4.1. Installing the M.2 SSD

Follow these steps to install your M.2 2230 NVMe SSD into the enclosure:

1. Unscrew the back cover: Use the provided screwdriver to loosen the screws on the back cover and carefully remove the metal lid.
2. Insert the M.2 SSD: Gently insert your M.2 2230 NVMe SSD into the slot. Ensure it is fully seated. Secure the SSD with the small screw provided.
3. Lo paadi igbona: Peel off the protective film from both sides of the silicone thermal pad. Place the thermal pad directly onto the SSD chip. This helps with heat dissipation.
4. Close the enclosure: Place the back cover back onto the enclosure and tighten the screws securely.

Image 4.1: Visual guide for SSD installation.

4.2. Initial Setup and Formatting

After installing the SSD, it may need to be formatted before use, especially if it's new. The recommended file system for broad compatibility with iPhone, Mac, and PC is exFAT.

Fun Mac:

1. Connect the SSD in its enclosure to your Mac.
2. Ṣii Disk IwUlO (found in Applications > Utilities).
3. Select the newly connected SSD from the sidebar.
4. Tẹ Paarẹ in the top bar.
5. In the pop-up window, set the Format to exFAT and the Scheme to GUID Ipin Map.
6. Tẹ Paarẹ to confirm. This will format the SSD.

Fun Windows PC:

1. Connect the SSD in its enclosure to your PC.
2. Ṣii File Explorer (Windows Key + E).
3. Locate the newly connected SSD (it might appear as an unformatted drive).
4. Right-click on the drive and select Format....
5. Labẹ File system, select exFAT.
6. Rii daju Awọn ọna kika ti ṣayẹwo ati tẹ Bẹrẹ.

5. Awọn ilana Iṣiṣẹ

5.1. Nsopọ si awọn ẹrọ

The FIDECO SSD enclosure is plug-and-play. Simply connect it to your device using the provided USB-C to USB-C cable. No additional drivers or software are required.

• iPhone 15 Series and Above: Connect directly to the iPhone's USB-C port.
• MacBook/iPad Pro: Connect directly to the USB-C port.
• Awọn ẹrọ Android: Connect directly to the USB-C port.
• PCs/Laptops/Gaming Consoles: Connect to an available USB-C port.

Image 5.1: The enclosure offers versatile connectivity with multiple devices.

5.2. Magnetic Attachment (for MagSafe-compatible phones)

The enclosure features built-in magnets for secure attachment to iPhone 15 series and newer models with MagSafe functionality. This allows for convenient, hands-free use, reducing the risk of accidental drops or disconnections during use, such as when recording video.

Akiyesi: This magnetic feature is only compatible with mobile phones that have magnetic suction functionality (MagSafe or equivalent).

Image 5.2: Magnetic attachment to an iPhone for simultaneous recording and storage.

5.3. Data Gbigbe

The enclosure supports USB 3.2 Gen 2, providing data transfer speeds up to 10Gbps. This enables rapid transfer of large files, photos, and videos. It also supports UASP, TRIM, and S.M.A.R.T for optimized performance and drive health monitoring.

For optimal speeds, ensure your host device also supports USB 3.2 Gen 2. Older USB standards will result in lower transfer rates.

Image 5.3: High-speed data transfer capabilities.

6. Itọju

To ensure the longevity and optimal performance of your FIDECO SSD enclosure:

• Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ìta àpò náà. Yẹra fún lílo àwọn ohun ìfọṣọ omi tàbí àwọn ohun èlò ìfọṣọ.
• Pipade Ooru: aluminiomu casing and included thermal pad are designed for efficient heat dissipation. Ensure the enclosure is not covered or placed in an area with poor airflow during extended use to prevent overheating.
• Ibi ipamọ: Nigbati o ko ba si ni lilo, tọju apade naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Mimu: Handle the enclosure with care to avoid physical damage. While the magnetic attachment is secure, avoid unnecessary force or impacts.

7. Laasigbotitusita

• SSD ko mọ:
  • Rii daju pe SSD ti fi sori ẹrọ daradara ati ni ifipamo laarin apade naa.
  • Verify the SSD is an M.2 NVMe 2230 (M-Key or M+B Key). SATA SSDs are not compatible.
  • Check the cable connection to both the enclosure and your device. Try a different USB-C port or cable if available.
  • If it's a new SSD, ensure it has been formatted (refer to Section 4.2).
  • Test the enclosure with a different SSD or on another compatible device to isolate the issue.
• Awọn iyara Gbigbe Data lọra:
  • Ensure your device's USB-C port supports USB 3.2 Gen 2 (10Gbps). Older USB standards will limit speed.
  • Verify the cable used is rated for USB 3.2 Gen 2 speeds.
  • Close any unnecessary applications on your device that might be consuming system resources.
  • Ensure the SSD itself is performing optimally.
• Magnetic Attachment Not Strong Enough:
  • Confirm your phone has MagSafe or equivalent magnetic functionality.
  • If using a phone case, ensure it is MagSafe compatible or thin enough not to interfere with the magnetic connection.
  • Clean the magnetic surfaces on both the enclosure and your phone/case to ensure no debris is weakening the connection.

8. Atilẹyin ọja

The FIDECO Magnetic M.2 2230 NVMe SSD Enclosure comes with a one-year limited warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

9. Atilẹyin

For technical support, warranty claims, or further assistance, please contact FIDECO customer service through the retailer where you purchased the product or visit the official FIDECO webojula fun alaye olubasọrọ.

When contacting support, please provide your product model number (API15) and a detailed description of the issue.