1. Ọja Ipariview
The Xiaomi Pocket Power Bank is a compact and portable charging solution featuring a 10000mAh high-density lithium polymer battery. It supports 22.5W fast charging with Power Delivery (PD) and Quick Charge 3.0, and includes a built-in USB-C cable for convenience. This power bank allows simultaneous charging of up to three devices via its integrated cable, USB-C port, and USB-A port. It is designed with 12-layer safety protection for reliable operation.
Figure 1: Xiaomi Pocket Power Bank (Maroon) with built-in USB-C cable.
Awọn ẹya pataki:
- High-Speed 22.5W Fast Charging: Supports both Power Delivery (PD) and Quick Charge 3.0 for rapid charging of devices and quick power bank recharge.
- Okun USB-C ti a dapọ: A built-in USB-C cable eliminates the need for carrying extra wires.
- Triple Output Ports: Charge up to three devices simultaneously using the built-in cable, USB-C port, and USB-A port.
- Agbara 10000mAh: Pese awọn idiyele pupọ fun awọn fonutologbolori ati awọn ẹrọ miiran.
- 12-Layer Safety Protection: Comprehensive safeguards against overcharging, overheating, short-circuits, and more.
- Low-Power Mode: Designed for safely charging small devices like earbuds and smartwatches.
- Apẹrẹ Iwapọ: Portable and lightweight, fitting easily into pockets or bags.
- Durable Built-in Cable: Tested for 5,000 bend cycles.
2. Eto ati Ibẹrẹ Lilo
2.1 Ngba agbara Bank Power
Before first use, fully charge your Xiaomi Pocket Power Bank.
- Connect a compatible USB-C charger (not included) to the power bank's USB-C input port.
- Alternatively, use the built-in USB-C cable to connect to a USB-C power adapter.
- Awọn afihan LED yoo tan imọlẹ lati fihan ilọsiwaju gbigba agbara. Gbogbo awọn LED mẹrin yoo jẹ to lagbara nigbati o ba gba agbara ni kikun.
A full recharge takes approximately 3.5 hours with a 22.5W fast charger.
Figure 2: Power Bank Ports (USB-C input/output, USB-A output).
2.2 Ṣiṣayẹwo Ipele Batiri
Press the power button once to check the remaining battery level indicated by the four LED lights.
- Awọn LED 4: 75-100% idiyele
- Awọn LED 3: 50-75% idiyele
- Awọn LED 2: 25-50% idiyele
- 1 LED: 0-25% idiyele
3. Awọn ilana Iṣiṣẹ
3.1 Awọn ẹrọ gbigba agbara
Ile-ifowopamọ agbara nfunni ni ọpọlọpọ awọn ọna lati gba agbara si awọn ẹrọ rẹ:
- Lilo okun USB-C ti a ṣe sinu: Extend the integrated USB-C cable and connect it directly to your USB-C compatible device.
- Lilo Ibudo USB-C: Connect your device's USB-C to USB-C cable to the power bank's USB-C port.
- Lilo ibudo USB-A: Connect your device's USB-A to [device connector] cable to the power bank's USB-A port.
The power bank automatically detects the connected device and begins charging. It supports simultaneous charging of up to three devices.
Figure 3: Charging a device using the built-in USB-C cable.
3.2 Low-Power Mode for Small Devices
To charge low-current devices such as Bluetooth earbuds, smartwatches, or fitness bands, activate the low-power charging mode.
- Fọwọ ba lẹẹmeji the power button on the side of the power bank.
- The LED indicators will show a specific pattern (e.g., blinking) to confirm low-power mode is active.
- So ẹrọ rẹ kekere-lọwọlọwọ.
- To exit low-power mode, double-tap the power button again or disconnect the device.
Figure 4: Activating Low-Power Discharge Mode.
4. Itọju ati Itọju
Proper care ensures the longevity and optimal performance of your Xiaomi Pocket Power Bank.
- Ibi ipamọ: Tọju banki agbara ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
- Ninu: Use a soft, dry cloth to clean the exterior. Do not use harsh chemicals or abrasive materials.
- Yago fun Bibajẹ Ti ara: Dáàbò bo banki agbara kuro ninu awọn isunmi, awọn ipa, ati titẹ ti o pọ ju.
- Ifihan omi: Keep the power bank away from water and high humidity. It is not waterproof.
- Igba aye Batiri: The power bank is designed to retain 80% of its capacity after 300 charge/discharge cycles. For best battery health, avoid completely draining the battery frequently.
- Itọju USB: The built-in cable is durable (5,000 bend cycles), but avoid excessive bending or pulling at sharp angles.
5. Laasigbotitusita
Ti o ba pade awọn ọran pẹlu banki agbara rẹ, tọka si awọn iṣoro ti o wọpọ ati awọn ojutu wọnyi:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Bank agbara ko gbigba agbara awọn ẹrọ. | Low battery, incorrect cable, device not compatible, low-power mode not activated for small devices. |
|
| Bank agbara ko gbigba agbara. | Faulty charging cable/adapter, power bank port issue. |
|
| Gbigba agbara lọra. | Non-fast charging cable/adapter, multiple devices charging simultaneously, device not supporting fast charge. |
|
| Bank agbara n gbona nigba lilo. | Normal operation during high-speed charging, or environmental factors. | Slight warming is normal. If it becomes excessively hot, disconnect all devices and allow it to cool down. Ensure proper ventilation. The power bank has 12-layer safety protection against overheating.  Figure 5: 12-Layer Safety Protection. |
Ti awọn iṣoro ba wa, jọwọ kan si atilẹyin alabara.
6. Awọn pato
| Orukọ awoṣe | Xiaomi Pocket Power Bank 10000mAh 22.5W Fast Charging|Inbuilt Cable |
| Nọmba awoṣe | P15ZM |
| Agbara Batiri | 10000 Milionuamp Awọn wakati (mAh) |
| Gbigba agbara agbara | 22.5W (Input & Output) |
| Asopọmọra Iru | USB Type A, USB Type C (Built-in cable and port) |
| Nọmba ti Ports | 3 (1x Built-in USB-C, 1x USB-C, 1x USB-A) |
| Ijade lọwọlọwọ | 4.5 Amps (Max) |
| Igba agbara Batiri | Approx. 3.5 Hours (with 22.5W charger) |
| Awọn ẹrọ ibaramu | Smartphones, Tablets, Smartwatches, Earbuds, Fitness Bands, Speakers |
| Dimensions (L x W x Thickness) | 10.5L x 6.5W x 2.7Th Centimeters |
| Iwọn | 230 giramu |
| Batiri Cell Type | Litiumu Iwon |
| Ilu isenbale | India |
7. Atilẹyin ọja ati Support
7.1 Olupese ká atilẹyin ọja
The Xiaomi Pocket Power Bank comes with a 1-odun olupese ká atilẹyin ọja Láti ọjọ́ tí a rà á. Àtìlẹ́yìn yìí bo àwọn àbùkù iṣẹ́ àti ìṣòro tí ó bá wáyé láti lílo déédé. Jọ̀wọ́ pa ẹ̀rí ìrajà rẹ mọ́ fún àwọn ẹ̀tọ́ àtìlẹ́yìn.
For detailed warranty terms and conditions, please refer to the official Xiaomi webojula tabi kan si atilẹyin alabara.
7.2 Onibara Support
For any assistance, technical support, or warranty inquiries, please contact Xiaomi Customer Service:
- Nọmba foonu: 1800 103 6286 (Available from 9 AM to 9 PM)
- Imeeli: Service.in@xiaomi.com
- Manufacturer/Importer Address: Xiaomi Technology India Pvt Ltd, Ground Floor, AKR Infinity, SY, No 113, Krishna Reddy Industrial area, 7th Mile, Hosur Road, Bangalore 560068, Karnataka, India.