AMIGO E-Lagos T3

AMIGO E-Lagos T3 Electric Bicycle User Manual

Model: E-Lagos T3 | Brand: AMIGO

1. Alaye Aabo pataki

Before operating your AMIGO E-Lagos T3 electric bicycle, please read and understand all instructions and safety warnings. Failure to follow these instructions may result in serious injury or damage to the bicycle.

  • Wọ Àṣíborí: Nigbagbogbo wọ àṣíborí keke ti a fọwọsi nigba gigun.
  • Ṣayẹwo Ride-ṣaaju: Before each ride, inspect the brakes, tires, lights, and ensure all quick releases and fasteners are secure.
  • Awọn Ofin Ọja: Tọ́ gbogbo òfin àti ìlànà ìrìnnà ní agbègbè rẹ. Gùn kẹ̀kẹ́ pẹ̀lú ààbò kí o sì kíyèsí àyíká rẹ.
  • Awọn ipo oju ojo: Exercise caution when riding in wet conditions, as braking distance may increase. Avoid riding in heavy rain or snow.
  • Opin iwuwo: Do not exceed the maximum load capacity of the bicycle.
  • Awọn ohun elo itanna: Keep electrical components dry. Do not submerge the bicycle or battery in water.
  • Awọn ọmọde: This electric bicycle is intended for adult use.

2. Eto ati Igbaradi Ibẹrẹ

Your AMIGO E-Lagos T3 electric bicycle may require some minor assembly and preparation before its first use.

AMIGO E-Lagos T3 Electric Bicycle

Figure 2.1: The AMIGO E-Lagos T3 Electric Bicycle, ready for use.

2.1 Unpacking ati Apejọ

  • Fara yọ keke naa kuro ninu apoti rẹ.
  • Install the pedals: Ensure pedals are threaded correctly (L for left, R for right) and tightened securely.
  • Adjust the handlebar and saddle height for a comfortable and safe riding position. Ensure all quick-release levers are firmly closed.

2.2 Gbigba agbara batiri

The battery is integrated into the rear rack and is removable for charging.

  • Wa ibudo gbigba agbara lori batiri naa.
  • So ṣaja pọ mọ batiri naa, lẹhinna pulọọgi ṣaja sinu iṣan ogiri boṣewa kan.
  • The charging time is approximately 5.5 to 7.5 hours for a full charge.
  • Ma ṣe fi gbigba agbara batiri silẹ laini abojuto fun awọn akoko ti o gbooro sii.

2.3 Tire Inflation

Ensure tires are inflated to the recommended pressure, typically found on the tire sidewall. Proper inflation improves ride quality and prevents punctures.

3. Awọn ilana Iṣiṣẹ

Familiarize yourself with the controls and functions of your E-Lagos T3 electric bicycle for an optimal riding experience.

3.1 Titan / Pa a ati Ifihan

Left handlebar with Ananda LED display and brake lever

Figure 3.1: The Ananda D15 LED display on the left handlebar, showing battery level and assistance mode.

  • Lati Fi agbara: Press and hold the power button on the Ananda D15 LED display (located on the left handlebar).
  • Assistance Levels: Use the '+' and '-' buttons on the display to select one of the 5 available pedal assistance levels. Level 1 provides minimal assistance, while Level 5 provides maximum assistance.
  • Lati Paarẹ: Tẹ bọtini agbara naa ki o si di i mu lẹẹkansi titi ti ifihan naa yoo fi pa.
  • The display shows battery charge status and current assistance level.

3.2 Gbigbe jia

Right handlebar with Shimano Nexus 7-speed shifter and brake lever

Figure 3.2: The Shimano Nexus 7-speed grip shifter on the right handlebar.

Your E-Lagos T3 is equipped with a Shimano Nexus 7-speed internal gear hub. Shift gears using the grip shifter on the right handlebar. Shift to a lower gear for easier pedaling on inclines and a higher gear for faster speeds on flat terrain.

3.3 Braking System

The bicycle features a V-Brake on the front wheel and a coaster brake (backpedal brake) on the rear wheel.

  • Brake iwaju: Operated by the lever on the left handlebar. Use for controlled stopping power.
  • Rear Brake (Coaster Brake): Activated by pedaling backward. Provides reliable stopping for the rear wheel.
  • Always apply both brakes simultaneously for effective and safe stopping.

3.4 Titiipa Handlebar

Handlebar lock mechanism on the front rack

Figure 3.3: The handlebar lock mechanism, used to stabilize the front wheel when parked.

The integrated handlebar lock helps stabilize the front wheel when the bicycle is parked, especially when loaded with items on the front rack. Rotate the mechanism to 'LOCK' to secure the handlebar, and to 'FREE' to allow steering.

3.5 ina System

The E-Lagos T3 is equipped with LED lights for both front and rear visibility.

Front rack with integrated LED headlight

Figure 3.4: The front rack with the integrated LED headlight for improved visibility.

  • The lights are powered by the main battery.
  • Turn on the lights using the dedicated button on the display or as instructed by the display manual.
  • Ensure lights are functional before riding in low-light conditions.

4. Itọju

Regular maintenance ensures the longevity and safe operation of your electric bicycle.

4.1 batiri Itọju

  • Gba agbara si batiri nigbagbogbo, paapaa ti ko ba si ni lilo, lati ṣetọju ilera rẹ.
  • Tọju batiri naa ni itura, aaye gbigbẹ, kuro lati orun taara ati awọn iwọn otutu to gaju.
  • Yago fun gbigbe batiri patapata ṣaaju gbigba agbara.

4.2 Ninu

Clean the bicycle with a damp cloth and mild soap. Avoid using high-pressure washers directly on electrical components or bearings.

4.3 Brakes and Tires

  • Ṣayẹwo awọn paadi idaduro nigbagbogbo fun yiya ki o rọpo wọn nigbati o jẹ dandan.
  • Ensure brake cables are not frayed and are properly adjusted.
  • Jẹ́ kí ìwọ̀n taya náà máa pọ̀ sí i gẹ́gẹ́ bí a ṣe sọ ní ẹ̀gbẹ́ taya náà.

4.4 Chain and Drivetrain

Keep the chain clean and lubricated for smooth operation and to prevent premature wear. The Shimano Nexus internal gear hub requires minimal maintenance but should be checked periodically by a professional.

AXA Solid Plus ring lock on the rear wheel

Figure 4.1: The AXA Solid Plus ring lock provides integrated security for the rear wheel.

5. Laasigbotitusita

This section addresses common issues you might encounter with your AMIGO E-Lagos T3 electric bicycle.

IsoroOwun to le FaOjutu
Motor ko ṣe iranlọwọBattery low or depleted; System not powered on; Assistance level set to 0.Charge battery; Power on the system via display; Increase assistance level.
Awọn imọlẹ ko ṣiṣẹLights turned off; Battery low.Turn on lights via display; Charge battery.
Bireki lero aileraBrake pads worn; Cables loose; Improper adjustment.Inspect and replace brake pads; Adjust brake cables; Consult a bicycle mechanic.
Awọn ariwo dani lati drivetrainDry or dirty chain; Loose components.Clean and lubricate chain; Check for loose bolts or components.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact customer support or a qualified bicycle mechanic.

6. Awọn pato

Detailed technical specifications for the AMIGO E-Lagos T3 Electric Bicycle.

Close-up of the Ananda M129 front hub motor

Figure 6.1: The Ananda M129 front hub motor provides pedal assistance.

Ẹya ara ẹrọSipesifikesonu
Orukọ awoṣeE-Lagos T3
Iwọn fireemu50 cm
Kẹkẹ Iwon28 inches (71 cm)
Ohun elo fireemuAluminiomu
Awọn jia7-speed Shimano Nexus (internal gear hub)
Motor IruAnanda M129 Front Hub Motor
Sensọ Iranlọwọ EfateleseRotational sensor
Agbara Batiri468 Wh (36V, 13Ah) Greenway YJ-145 Lithium-ion
Ipo batiriIntegrated into rear rack, removable
Akoko gbigba agbara5.5-7.5 wakati
Ibiti o45 - 120 km (approx. 65 km average)
Iyara to pọ julọ (Iranlọwọ)25 km / h
IfihanAnanda D15 LED (5 assistance levels)
Iwaju BrakeV-Breki
Ru BrakeCoaster Brake (backpedal brake)
Awọn imọlẹLED iwaju ati ki o ru
Awọn ẹya ẹrọDouble kickstand, closed chain guard, front and rear luggage racks, luggage straps, handlebar lock, bell, AXA Solid Plus ring lock
IwọnIsunmọ. 29 kg
Close-up of the Shimano Nexus rear hub and coaster brake mechanism

Figure 6.2: The Shimano Nexus 7-speed internal gear hub and coaster brake on the rear wheel.

7. Atilẹyin ọja ati Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or spare parts, please contact the AMIGO customer service department or your authorized dealer.

© 2023 AMIGO. Gbogbo ẹ̀tọ́ wa ni ipamọ́.