WORKPRO W125296A Carpet and Upholstery Cleaner Instruction Manual

1. Ifihan

Thank you for choosing the WORKPRO W125296A Carpet and Upholstery Cleaner. This powerful and versatile cleaning device is designed to effectively remove stains and dirt from carpets, upholstery, car interiors, and more. Featuring a 450W motor, 13kPa suction power, and a dual-tank system, it ensures a thorough and hygienic cleaning experience. Please read this manual carefully before use to ensure safe and optimal operation.

2. Alaye Aabo

Nigbagbogbo tẹle awọn iṣọra aabo ipilẹ nigba lilo awọn ohun elo itanna lati dinku eewu ina, mọnamọna, tabi ipalara.

• Ka gbogbo awọn ilana ṣaaju lilo ohun elo naa.
• Maṣe fi ohun elo naa bọ inu omi tabi awọn olomi miiran.
• Ma ṣe lo pẹlu okun ti o bajẹ tabi plug. Ti ohun elo ko ba ṣiṣẹ bi o ti yẹ, ti lọ silẹ, bajẹ, fi silẹ ni ita, tabi sọ sinu omi, da pada si ile-iṣẹ iṣẹ kan.
• Use only cleaning products recommended by the manufacturer.
• Yọọ pulọọgi kuro ni ijade nigbati ko si ni lilo ati ṣaaju ṣiṣe mimọ tabi ṣiṣe.
• Jeki irun, aṣọ alaimuṣinṣin, awọn ika ọwọ, ati gbogbo awọn ẹya ara kuro lati awọn ṣiṣi ati awọn ẹya gbigbe.
• Maṣe gbe ohunkohun ti o njo tabi ti nmu siga, gẹgẹbi awọn siga, awọn ere-kere, tabi eeru gbigbona.
• Lo itọju afikun nigbati o ba sọ di mimọ lori awọn pẹtẹẹsì.
• Ma ṣe lo lati gbe awọn olomi ina tabi ina, gẹgẹbi petirolu, tabi lo ni awọn agbegbe nibiti wọn le wa.
• Maṣe gba laaye lati lo bi nkan isere. Ifarabalẹ sunmọ jẹ pataki nigba lilo nipasẹ tabi sunmọ awọn ọmọde.

3. Ọja irinše

Familiarize yourself with the parts of your WORKPRO W125296A cleaner:

• 1. Yipada
• 2. Mu
• 3. Agbara okun kio
• 4. Agbara Okun
• 5. Clean Water Tank (1600 ml)
• 6. Fẹlẹ kekere
• 7. Dirty Water Tank (750 ml)
• 8. Brush Hook
• 9. Okun
• 10. Fẹlẹ nla
• 11. Hose Hook
• 12. Multi-fabric Cleaner (750 ml, packed inside clean water tank)
• 13. Idiwon Idiwọn

Olusin 3.1: Pariview of the WORKPRO W125296A Carpet and Upholstery Cleaner and its labeled components.

4. Eto

Ṣaaju lilo akọkọ, rii daju pe gbogbo awọn paati wa ati ti ko bajẹ.

4.1 Preparing the Cleaning Solution

1. Remove the clean water tank (5) from the main unit.
2. Unscrew the cap of the clean water tank.
3. Kun omi mimọ pẹlu omi titi de laini MAX.
4. Add the multi-fabric cleaner (12) to the clean water tank. The recommended ratio is 1 part cleaner to 35 parts water. Use a low-foaming cleaning solution.
5. Securely screw the cap back onto the clean water tank and place it back into the main unit, ensuring it clicks into place.

Figure 4.1: Visual guide for filling the clean water tank and adding cleaning solution.

Figure 4.2: Recommended dilution ratio for cleaning solution and note on using low-foaming cleaner.

4.2 Attaching the Hose and Brush

1. Insert the hose (9) into the designated port on the main unit, ensuring the locking tab is securely fixed.
2. Select the desired brush head (small brush (6) or large brush (10)) and attach it firmly to the end of the hose handle.
3. Attach the power cord hook (3) and brush hook (8) to the main unit for organized storage.

Figure 4.3: Attaching the hose and organizing hooks for the cleaner.

5. Awọn ilana Iṣiṣẹ

The WORKPRO W125296A operates with a simple three-step process: spray, brush, and vacuum.

5.1 General Cleaning Procedure

1. Pulọọgi okun agbara sinu iṣan itanna to dara.
2. Turn on the appliance using the switch (1).
3. Sokiri: Hold the brush head over the stained area and press the trigger on the handle to spray the cleaning solution onto the surface.
4. Fẹlẹ: Gently scrub the stained area with the brush head to loosen dirt and stains.
5. Igbala: Release the spray trigger and slowly move the brush head over the treated area to vacuum up the dirty solution. Ensure the brush head is held at an appropriate angle for optimal suction.
6. Repeat steps 3-5 as necessary until the stain is removed and the area is clean.

Figure 5.1: The all-in-one function for effective stain removal.

Figure 5.2: Important note on maintaining the correct brush head angle for efficient water absorption.

5.2 Lilo Oriṣiriṣi fẹlẹ

• Large Brush (10): Ideal for deep cleaning larger areas such as carpets, rugs, and wide upholstery sections.
• Small Brush (6): Perfect for localized cleaning, delicate fabrics, tight spaces, and intricate areas like car seats or furniture crevices.

Figure 5.3: The two included brush heads for versatile cleaning tasks.

6. Itọju

Itọju deede ṣe idaniloju igbesi aye gigun ati iṣẹ ti o dara julọ ti regede rẹ.

6.1 Sofo ati Cleaning tanki

1. After each use, or when the dirty water tank (7) reaches its MAX level, turn off and unplug the appliance.
2. Yọ omi idọti kuro ni ẹyọ akọkọ.
3. Fara balẹ sọ omi idọti naa sinu ifọwọ tabi sisan.
4. Rinse both the dirty water tank and the clean water tank thoroughly with clean water.
5. Allow both tanks to air dry completely before reassembling or storing the unit.

Figure 6.1: Reminder to empty the dirty water tank to prevent overflow and maintain suction.

Figure 6.2: Cleaning the dirty water tank after use.

6.2 Cleaning Brush Heads and Hose

• Detach the brush head from the hose handle.
• Rinse the brush head under running water to remove any debris or residue.
• If necessary, use a small brush or cloth to clean the bristles.
• Wipe down the exterior of the hose and the main unit with a damp asọ.
• Rii daju pe gbogbo awọn ẹya ti gbẹ ṣaaju titoju.

7. Laasigbotitusita

8. Awọn pato

9. Awọn fidio ọja

Watch these official product videos for visual guidance on using your WORKPRO W125296A cleaner.

10. Atilẹyin ọja ati Support

WORKPRO products are manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included with your purchase or visit the official WORKPRO webojula.

For technical support, troubleshooting assistance, or to order replacement parts, please contact WORKPRO Customer Service. Contact information can typically be found on the product packaging or the official WORKPRO webojula.