Ìwé Ìtọ́sọ́nà Olùlò GLOBE Electric 66000138 Ìmọ́lẹ̀ Aláìlágbára Méjì-Lẹ́ẹ̀kan ...

1. Ifihan

This manual provides detailed instructions for the safe installation, operation, and maintenance of your GLOBE Electric 66000138 2-Light Semi-Flush Mount Ceiling Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The GLOBE Electric 66000138 is a 2-light semi-flush mount ceiling fixture featuring a matte black finish and a 2-tier white linen shade. Its contemporary design is suitable for various indoor settings, including dining rooms, kitchens, and living rooms.

Image 1.1: The GLOBE Electric 66000138 2-Light Semi-Flush Mount Ceiling Light with its matte black base and two-tiered white linen shade.

2. Alaye Aabo pataki

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing.

• Always turn off the main power supply at the circuit breaker before installing or performing any maintenance on the fixture.
• Kan si alagbawo ina mọnamọna ti o pe ti o ko ba ni idaniloju nipa ilana fifi sori ẹrọ.
• Ensure all electrical connections are made in accordance with local codes and ordinances, as well as the National Electric Code (NEC).
• Lo iru boolubu ti a ti sọ ati wat nikantage (2x E26/Medium Base 60W max). Exceeding the maximum wattage can cause overheating and damage to the fixture.
• Má ṣe fi ohun èlò yìí sí i ní ìgbà tí omi bá rọ̀ tàbí ní ìgbà tí kò rọ̀.amp awọn ipo. A ṣe apẹrẹ rẹ fun lilo inu ile nikan.
• Handle the linen shade and bulbs with care to prevent damage.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• 1 x Semi-Flush Mount Ceiling Light Fixture (Model 66000138)
• Mounting Hardware (including mounting plate, screws, wire nuts)
• Awọn ilana fifi sori ẹrọ

Akiyesi: Awọn gilobu ina ko si ati pe o gbọdọ ra lọtọ.

4. Awọn alaye ọja

Image 4.1: Dimensional diagram of the ceiling light, showing a 15-inch diameter and 9.75-inch height.

5. Eto ati fifi sori

Before you begin, ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.

Fifi sori Igbesẹ-Igbese:

1. Pa Agbara: Locate the circuit breaker that controls the power to the light fixture location and turn it off. Verify power is off using a voltage idanwo.
2. Múra Àwo Ìfipamọ́: Attach the mounting plate (included in hardware) to the electrical junction box in the ceiling. Ensure it is securely fastened. Note: Some older electrical boxes may require shorter mounting screws than those provided. Check for proper fit and acquire suitable screws if necessary.
3. Awọn isopọ Waya: Carefully connect the electrical wires from the fixture to the wires in the junction box.
   • Sopọ awọn dudu wire (hot) from the fixture to the dudu wire (hot) from the junction box.
   • Sopọ awọn funfun wire (neutral) from the fixture to the funfun wire (neutral) from the junction box.
   • Sopọ awọn ilẹ wáyà (bàbà tàbí ewéko lásán) láti inú ohun èlò náà sí ibi tí wọ́n ti ń lò ó ilẹ waya lati awọn ipade apoti.
   Fi gbogbo asopọ mọ pẹlu awọn eso waya ki o fi teepu ina mọnamọna di i fun aabo afikun.
4. Gbe Imuduro: Carefully push the wired connections into the junction box. Align the fixture base with the mounting plate and secure it using the provided screws.
5. Fi sori ẹrọ Isusu: Screw two E26/Medium Base 60W maximum bulbs (sold separately) into the sockets. Do not overtighten.
6. So iboji: Carefully attach the 2-tier linen shade to the fixture according to the product design. Ensure it is stable and secure.
7. Pada Agbara pada: Tan agbara pada ni ibi ti a ti n da ina naa. Idanwo ohun elo ina naa.

Aworan 5.1: A sunmọ-soke view of the two E26 bulb sockets within the matte black fixture base, ready for bulb installation.

6. Awọn ilana Iṣiṣẹ

Titan/Pa:

Operate the light fixture using a standard wall light switch connected to the circuit. Ensure the switch is in the 'ON' position for the light to function.

Ẹya Dimmable:

This fixture is fully dimmable. To utilize the dimming function, you must install a compatible dimmer switch (sold separately) in place of your standard wall switch. Follow the dimmer switch manufacturer's instructions for installation and operation.

Ibamu Boolubu:

The fixture requires two E26/Medium Base bulbs with a maximum wattage of 60W each. It is compatible with both LED and Incandescent bulbs. For smart lighting solutions, consider using Globe Electric Smart bulbs (sold separately).

Aworan 6.1: Examples of compatible E26 base bulbs, including standard LED, Edison-style, and Wi-Fi enabled smart bulbs.

7. Itọju

Ninu:

To clean the fixture, ensure the power is turned off at the circuit breaker. Use a soft, dry cloth to wipe down the matte black metal components. For the linen shade, gently dust with a soft brush or a lint-free cloth. Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish and shade material.

Rirọpo Boolubu:

Before replacing bulbs, turn off the power to the fixture at the circuit breaker. Allow bulbs to cool completely before touching them. Unscrew the old bulbs and screw in new E26/Medium Base bulbs, ensuring they do not exceed 60W each. Restore power after replacement.

8. Laasigbotitusita

Tí o bá ní ìṣòro pẹ̀lú ohun èlò ìmọ́lẹ̀ rẹ, wo àwọn ìṣòro àti ìdáhùn tó wọ́pọ̀ wọ̀nyí:

9. Atilẹyin ọja ati Support

Alaye Atilẹyin ọja:

This product is sold without an explicit warranty. Please refer to your retailer's return policy for any issues upon purchase.

Atilẹyin Onibara:

For further assistance or inquiries regarding your GLOBE Electric product, please visit the official Globe Electric website or contact their customer service department. You can often find contact information on the manufacturer's webojula tabi nipasẹ rẹ ojuami ti o ra.

Ṣabẹwo si GLOBE Electric Store on Amazon fun diẹ ẹ sii awọn ọja ati alaye.