Ọrọ Iṣaaju
Thank you for choosing the Vrabocry DC 5V/12V/24V 17 Key RF Wireless Remote LED Controller. This device is designed to provide versatile control over your 5050, 3528, and 5630 LED strip lights, offering a range of static colors and dynamic modes. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.
Alaye Aabo
- Rii daju igbewọle voltage (5V, 12V, or 24V) matches your LED strip lights and power supply. Incorrect voltage can damage the controller and LED strips.
- Do not expose the controller or remote to moisture or extreme temperatures.
- Ge asopọ agbara kuro ṣaaju ṣiṣe eyikeyi asopọ tabi awọn asopọ kuro.
- Ọja yii jẹ ipinnu fun lilo inu ile nikan.
- Jeki kuro ni arọwọto awọn ọmọde.
Package Awọn akoonu
Package pẹlu awọn nkan wọnyi:
- 1 x RF Mini RGB Controller
- 1 x 17-Key RF Wireless Remote (CR2025 battery not included)
- 1 x Itọsọna olumulo
Ṣeto
1. Adarí Asopọ
- Connect your LED strip light to the 4-pin output connector of the RF Mini RGB Controller. Ensure the polarity is correct (usually indicated by arrows or markings).
- Connect a compatible DC 5V/12V/24V power supply to the input jack of the RF Mini RGB Controller.
- Daju pe gbogbo awọn asopọ wa ni aabo ṣaaju lilo agbara.
Image: The Vrabocry RF Mini RGB Controller connected to its 17-key wireless remote. The controller has a white cable with a 4-pin connector for LED strips and a power input jack.
2. Latọna jijin Iṣakoso batiri sori
The 17-key RF Wireless Remote requires one CR2025 button battery (not included).
- Locate the battery tray on the back of the remote control.
- Gently push the small tab and pull out the battery tray.
- Fi batiri CR2025 titun sii pẹlu ẹgbẹ rere (+) ti nkọju si oke.
- Gbe atẹ batiri pada sinu isakoṣo latọna jijin titi ti yoo fi tẹ sinu ipo rẹ.
Image: The back of the 17-key RF Wireless Remote, illustrating the battery compartment for a CR2025 battery. Instructions for opening and inserting the battery are visible.
Awọn ilana Iṣiṣẹ
The 17-key RF Wireless Remote allows for comprehensive control of your LED strip lights. The remote operates using a 433MHz wireless signal, providing control without direct line-of-sight.
Aworan: Iwaju view of the 17-key RF Wireless Remote Control, displaying all buttons and their labels for various functions.
Awọn iṣẹ iṣakoso latọna jijin:
| Bọtini | Išẹ |
|---|---|
| LORI / DURO | Turns the LED lights on or switches to standby mode. |
| MODE+ / MODE- | Switches between 9 dynamic modes or transitions from static lighting to dynamic modes. |
| SPEED+ / SPEED- | Adjusts the speed of dynamic modes (5 levels). |
| BRIGHT+ / BRIGHT- | Adjusts the brightness of static colors or dynamic modes. |
| COLOR+ / COLOR- | Cycles through 20 static colors. Can also switch from dynamic mode to a static color. |
| SINGLE COLOR SELECT | Directly selects specific static colors: White, Red, Green, Blue, Yellow, Cyan, Pink. |
| DEMO | Activates a demonstration mode cycling through various dynamic effects. |
Awọn ọna Yiyi:
The controller offers 9 dynamic modes, including effects such as strobe, breathing, fading in and out, slow flashing, and flickering. Use the MODE+ ati IPO- buttons to cycle through these effects.
Awọn awọ Aimi:
There are 20 static colors available. Use the COLOR+ ati COLOR- buttons to select your desired color, or use the dedicated single color buttons for quick access to primary colors.
Itoju
- Ninu: Use a soft, dry cloth to clean the controller and remote. Do not use liquid cleaners or solvents.
- Rirọpo Batiri: Replace the CR2025 battery in the remote control when its range decreases or it stops responding. Refer to the "Remote Control Battery Installation" section for instructions.
- Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ nigbati o ko ba wa ni lilo fun awọn akoko gigun.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| LED strip lights do not turn on. | Ko si agbara si oludari. Awọn asopọ ti ko tọ. Batiri latọna jijin ti ku. | Ṣayẹwo asopọ ipese agbara. Verify LED strip and power supply connections are secure and correct polarity. Rọpo batiri latọna jijin. |
| Isakoṣo latọna jijin ko dahun. | Batiri ti ku tabi ti ko tọ. Remote is too far from the controller. | Replace CR2025 battery, ensuring correct polarity. Move closer to the controller. The RF signal has a typical range, but obstacles can reduce it. |
| LED colors are incorrect or flickering. | Asopọ alaimuṣinṣin. Incompatible LED strip type. | Check all 4-pin connections for the LED strip. Ensure your LED strip is a common anode RGB type compatible with this controller. |
Awọn pato
- Voltage: 5V - 24V DC
- Ṣiṣẹ lọwọlọwọ: 12A / 3 channels (4A per channel)
- Iwọn otutu iṣẹ: -20°C si 60°C (-4°F si 140°F)
- Awọn iwọn Alakoso: Isunmọ 1.6 x 0.5 x 0.2 inches (40 x 12.7 x 5 mm)
- Iṣakoso RGB: 3 output channels, common anode+
- Awọn awọ Aimi: 20
- Awọn ọna Yiyi: 9
- Awọn ipele iyara: 5
- Ọna Iṣakoso: 433MHz RF Wireless
- Remote Battery Type: CR2025 (ko si)
Atilẹyin ọja ati Support
Vrabocry products are designed for reliability and performance. For warranty information or technical support, please refer to the retailer where you purchased this product or visit the official Vrabocry webojula. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
If you encounter any issues not covered in this manual, please contact customer support for assistance.