PELONIS 23-Inch 1500W PTC Tower Space Heater Instruction Manual

Ọrọ Iṣaaju

Thank you for choosing the PELONIS 23-Inch 1500W PTC Tower Space Heater. This portable electric heater is designed for indoor use, providing efficient and comfortable warmth with advanced safety features. It features a 1500W PTC fan heater, remote control, programmable thermostat, and 70° oscillation to distribute heat effectively.

Alaye Aabo pataki

Please read and understand all safety instructions before using this heater. Failure to do so may result in electric shock, fire, or serious injury.

• Idaabobo Alapapo: The heater is equipped with an automatic shut-off feature that activates if the unit overheats.
• Italolobo-Lori Idaabobo: For enhanced safety, the heater will automatically turn off if it is accidentally tipped over.
• Ohun elo sooro Ina: Constructed from high-quality, cool-touch flame-resistant material for added safety.
• Asopọ agbara: Ensure the heater is plugged directly into a US standard outlet without any adapters or extension cords.
• Iyọkuro: Maintain adequate clearance around the heater to prevent obstruction of air intake and exhaust.
• Abojuto: Ma ṣe fi ẹrọ igbona silẹ laini abojuto, paapaa ni ayika awọn ọmọde tabi ohun ọsin.

Ọja Pariview

The PELONIS Tower Space Heater combines a sleek design with user-friendly controls for optimal comfort.

Awọn eroja

• Ẹka akọkọ: The tower-shaped heater housing the PTC ceramic heating elements and fan.
• Ibi iwaju alabujuto: Be lori awọn oke ti awọn kuro fun Afowoyi isẹ.
• Isakoṣo latọna jijin: Gba laaye iṣẹ irọrun lati ijinna kan.
• Okun Agbara: Integrated power cord for electrical connection.
• Ọwọ Gbe: Imudani ti a ṣepọ fun irọrun gbigbe.

Pánẹ́lì Ìṣàkóso & Àwọn Iṣẹ́ Láàárín Ọ̀nà

• Bọtini agbara: Yi ẹrọ ti ngbona Tan/PA.
• Mode/Heat Settings: Cycles through High, Low, and ECO modes.
• Atunṣe iwọn otutu: O mu iwọn otutu afojusun pọ si tabi dinku.
• Oscillation (OSC) Button: Activates or deactivates the 70° oscillation function.
• Bọtini Aago: Ṣeto aago aifọwọyi (to awọn wakati 8).
• Ifihan LED: Shows current settings and ambient temperature.

Ṣeto

1. Yọọ kuro: Carefully remove the heater from its packaging and ensure all components are present.
2. Ibi: Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, curtains, or other combustible materials.
3. Asopọ agbara: So okùn agbára náà tààrà sínú ihò ìtajà ògiri 120V AC, 60Hz. Má ṣe lo àwọn okùn ìfàgùn tàbí àwọn ìlà agbára.

Awọn ilana Iṣiṣẹ

Titan/Pa a

• Tẹ awọn Agbara button on the control panel or remote control to turn the heater ON.
• Tẹ awọn Agbara button again to turn the heater OFF. The fan may continue to run for a short period to cool down the heating elements.

Selecting Heat Mode

• Tẹ awọn Agbona button to cycle through the available heat modes:
• Giga (1500W): Provides maximum heat output.
• Kekere (900W): Provides moderate heat output.
• Ipo ECO: Automatically adjusts power consumption based on the ambient temperature to maintain your set temperature and save energy.

Eto iwọn otutu

• In High or Low mode, use the Temperature Up (+) or Temperature Down (-) buttons to set your desired room temperature. The heater will cycle ON/OFF to maintain this temperature.
• Eto iwọn otutu ti o pọju jẹ 70°F (21°C).

Oscillation Išė

• Tẹ awọn OSC button to activate the 70° wide oscillation, distributing heat across a wider area.
• Tẹ awọn OSC bọtini lẹẹkansi lati da oscillation.

Ṣiṣeto Aago

• Tẹ awọn Aago button to set the auto-off timer. Each press will increase the timer setting by 1 hour, up to a maximum of 8 hours.
• The LED display will show the remaining time before the heater automatically turns off.

Itoju

Ninu

• Yọọ ẹrọ ti ngbona nigbagbogbo ki o jẹ ki o tutu patapata ṣaaju ṣiṣe mimọ.
• Lo asọ, damp asọ lati pa awọn ita ita. Ma ṣe lo abrasive ose tabi epo.
• Lo ẹ̀rọ ìfọṣọ pẹ̀lú ohun èlò ìfọmọ́ra láti mú eruku kúrò nínú àwọn ohun èlò ìfàfẹ́ afẹ́fẹ́ àti àwọn ohun èlò ìtújáde.
• Má ṣe tẹ ohun èlò ìgbóná náà sínú omi tàbí kí omi má ṣe rọ̀ sínú ilé.

Ibi ipamọ

• Store the heater in its original packaging in a cool, dry place when not in use.
• Rii daju pe okun agbara ti wa ni wiwọ daradara ati ni ifipamo lati yago fun ibajẹ.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact PELONIS customer service. Keep your proof of purchase for any warranty claims.