1. Ifihan
This manual provides detailed instructions for the assembly, operation, and maintenance of your YELLOW JACKET ASM-55 Metal Detector. Please read this manual thoroughly before using the device to ensure proper function and to maximize your detection experience. This metal detector is designed for both professional and recreational use, offering high accuracy and multiple detection modes.
2. Ọja Ipariview
2.1 irinše
The YELLOW JACKET ASM-55 Metal Detector package includes the following main components:
- Main Control Unit with LCD Display
- Adjustable Stem (20 to 48 inches)
- 11-inch Waterproof Search Coil
- Armrest with Strap
- Over-Ear Headset
- Apo Gbigbe To ṣee gbe
- Practical Edge Shovel
- Two 9V Batteries
Olusin 2.1: Pariview of the YELLOW JACKET ASM-55 Metal Detector and its included accessories.
2.2 Key Awọn ẹya ara ẹrọ
- High Accuracy Detection: Equipped with an upgraded DSP chip for enhanced detection stability and accuracy.
- 5 Search Modes: All Metal, Disc, Memory, Jewelry, and Pinpointer modes for versatile target identification.
- Ifihan LCD nla: Clear, backlit display for easy target identification, depth indication, and mode selection, even in low light.
- Gigun Adijositabulu: Stem adjusts from 20 to 48 inches to accommodate various user heights and preferences.
- Okun wiwa ti ko ni omi: The 11-inch search coil is IP65 rated, allowing for detection in shallow water.
- Apẹrẹ Ergonomic: Lightweight construction with comfortable silicone keys and elbow support for extended use.
- Iranti ti a ṣe sinu: Retains ON/OFF settings, eliminating the need to reset the detector after each power cycle.
Figure 2.2: Comprehensive functionality of the ASM-55 Metal Detector.
3. Eto ati Apejọ
Follow these steps to assemble your YELLOW JACKET ASM-55 Metal Detector:
- So Okun Iwadi naa: Connect the 11-inch search coil to the lower stem using the provided bolt and nut. Ensure it is securely fastened but allows for slight angle adjustment.
- Connect the Stems: Insert the lower stem into the middle stem, and then connect the middle stem to the upper stem (which has the control unit and armrest). Adjust the length to your preference by twisting and locking the adjustable sections. The length can be adjusted from 20 to 48 inches.
- So Ẹrọ Iṣakoso naa sori ẹrọ: The control unit is pre-attached to the upper stem. Ensure it is oriented correctly for easy viewing and access to controls.
- So okun okun naa pọ: Carefully wrap the search coil cable around the stem, leaving enough slack for coil movement. Plug the cable connector into the port on the control unit. Ensure the connection is firm.
- Fi Awọn batiri sii: Open the battery compartment on the control unit. Insert two 9V batteries, observing the correct polarity. Close the compartment securely.
- Adjust Armrest and Strap: Position the armrest for comfort and secure your forearm with the strap to reduce fatigue during use.
Figure 3.1: Assembly diagram of the metal detector.
4. Awọn ilana Iṣiṣẹ
4.1 Agbara Tan / Pa
Tẹ awọn AGBARA button (usually marked with a power symbol) to turn the detector on or off. The device retains its last settings due to the built-in memory function.
4.2 LCD Ifihan Loriview
Nọmba 4.1: Alaye view ti ifihan LCD ati awọn bọtini iṣakoso.
The LCD display provides visual information about detected targets, current settings, and battery status. Key indicators include:
- Kọ́sọ̀ ID Àfojúsùn: Ó tọ́ka sí irú irin tó ṣeé ṣe kí a rí.
- Digital ID / P-P Cursor: Provides a numerical value for target identification.
- Ìtọ́ka Ìjìnlẹ̀ Owó: Ó ṣe àkíyèsí ìjìnlẹ̀ ohun tí a rí.
- Sens Cursor: Shows the current sensitivity level.
- Mode Cursor: Displays the active detection mode.
4.3 Awọn ọna wiwa
The ASM-55 offers five distinct detection modes. Press the MODE button to cycle through them:
- All Metal Mode (A-M): Detects all types of metal. This mode is ideal for general searching when you do not want to discriminate against any metal type.
- Discrimination Mode (DISC): Allows you to eliminate unwanted metal types (e.g., iron) from detection. Use the '+' and '-' buttons to adjust the discrimination level.
- Ipo Iranti: This mode allows the detector to remember a specific target type and only search for that type of metal.
- Ipo Ohun-ọṣọ: Optimized for finding jewelry, typically filtering out iron and other common trash metals.
- Pinpointer Mode (PP): Used to precisely locate the exact position of a detected target. Press and hold the PP bọtini lati mu ṣiṣẹ.
Figure 4.2: The five search modes available on the ASM-55 Metal Detector.
4.4 Atunse ifamọ
Tẹ awọn SENS button to adjust the detector's sensitivity. Higher sensitivity increases detection depth but may also increase false signals in mineralized ground or areas with electromagnetic interference. Adjust sensitivity using the '+' and '-' buttons.
4.5 Iṣakoso iwọn didun
The detector features three volume levels. Use the speaker button to cycle through the volume settings to suit your environment and preference. Headphones are included for private listening.
4.6 Target Indication and Depth
Figure 4.3: The 11-inch waterproof search coil and adjustable stem.
When a target is detected, the LCD will display a Target ID Cursor and a Digital ID value, indicating the probable type of metal. The Coin Depth Cursor will provide an estimated depth. The 11-inch search coil allows for detection up to 12 inches deep for a quarter-sized coin.
Figure 4.4: Detection depth capability of the ASM-55.
5. Itọju
- Ninu: Lẹhin lilo kọọkan, mu ese oluwari pẹlu ipolowoamp cloth. Avoid using abrasive cleaners or solvents. The search coil can be rinsed with fresh water due to its waterproof design.
- Ibi ipamọ: Store the detector in a cool, dry place when not in use. If storing for an extended period, remove the batteries to prevent leakage.
- Rirọpo Batiri: Replace batteries when the low battery indicator appears on the LCD. Always use fresh 9V batteries.
- Itọju USB: Avoid sharp bends or kinks in the search coil cable to prevent internal damage.
6. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Àwọn bátìrì tí ó ti kú; Fífi bátìrì tí kò tọ́ sí i | Replace batteries; Ensure correct polarity |
| Constant false signals | High sensitivity; Electromagnetic interference; Mineralized ground | Reduce sensitivity; Move away from power lines/electronics; Use DISC mode |
| Ko si awari | Search coil not connected; Incorrect mode; Low sensitivity | Check coil cable connection; Switch to ALL METAL mode; Increase sensitivity |
| Inaccurate target ID | Target too deep; Multiple targets; Interference | Sweep slower; Use Pinpointer mode for precise location; Adjust sensitivity |
7. Awọn pato
- Brand: JACKET YELLOW
- Awoṣe: ASM-55
- Àwọ̀: Yellow
- Ohun elo: Ṣiṣu
- Orisun Agbara: Battery Powered (2 x 9V batteries, not included for initial purchase but often bundled)
- Ìwọ̀n Nkan: kilo 2.9 (6.38 poun)
- Awọn iwọn ọja: 11"L x 6"W x 17"H (packaged)
- Gigun Adijositabulu: Yes, from 20 inches to 48 inches
- Iwọn Idaabobo Kariaye: IP65 (for search coil)
- Awọn ọna Iwari: 5 (All Metal, Disc, Memory, Jewelry, Pinpointer)
- Search Coil Size: 11 inches
- Max Detection Depth: Approximately 12 inches for a quarter-sized coin
8. Atilẹyin ọja ati Support
For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official YELLOW JACKET webojula. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.