MVMT Chrono II Men's Chronograph Watch

Ọrọ Iṣaaju

Thank you for choosing the MVMT Chrono II Men's Chronograph Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. The Chrono II features a robust design with lumi-filled hands, sharp angular lugs, applied faceted indices, and a stepped chamfered case. It is designed for everyday use with a water resistance rating of 5 ATM.

Aworan: Iwaju view of the MVMT Chrono II Chronograph Watch with a white dial and cognac tan leather strap.

Bibẹrẹ

Siṣàtúnṣe okun

The MVMT Chrono II features a Tang Buckle clasp. To adjust the strap, simply slide the strap through the buckle and secure the pin into the desired hole for a comfortable fit on your wrist.

Aworan: Ẹyin view of the watch displaying the Tang Buckle clasp and the leather strap.

Itọsọna iwọn ọwọ

Refer to the sizing guide to understand how different watch sizes appear on various wrist dimensions. This helps in achieving an optimal fit.

Image: A visual guide illustrating various watch diameters (24mm, 34mm, 38mm, 40mm, 42mm, 48mm) as they would appear on 6-inch and 7-inch wrists.

Ṣiṣeto Aago ati Ọjọ

Your MVMT Chrono II watch is equipped with a crown and two pushers for setting functions.

Aworan: Apa view of the watch highlighting the crown (center) and the two chronograph pushers (top and bottom).

1. Ṣiṣeto akoko naa:
   • Pull the crown out to position 2 (farthest out).
   • Turn the crown to move the hour and minute hands to the correct time.
   • Push the crown back into position 0 (normal operating position) to start the watch.
2. Ṣiṣeto Ọjọ:
   • Fa ade jade si ipo 1 (tẹ akọkọ).
   • Tan ade lati ṣatunṣe ọjọ.
   • Titari ade pada si ipo 0.

   Akiyesi: Avoid setting the date between 9 PM and 3 AM, as this can interfere with the date change mechanism.

Lilo Iṣẹ Chronograph

Iṣẹ́ chronograph náà fún ọ láyè láti wọn àkókò tó ti kọjá.

1. Bẹrẹ: Press the top pusher to start the chronograph (the large second hand and sub-dials will begin moving).
2. Duro: Press the top pusher again to stop the chronograph and read the elapsed time.
3. Tun: After stopping, press the bottom pusher to reset all chronograph hands to their zero positions.

Akiyesi: Ensure the chronograph is reset to zero before starting a new measurement for accurate readings.

Awọn Itọsọna Resistance Omi

Your MVMT Chrono II watch is water resistant up to 5 ATM (50 meters). This rating indicates that the watch is suitable for everyday use and can withstand brief submersion in water, such as showering or swimming in shallow water. It is kii ṣe suitable for diving or high-impact water sports.

• 5 ATM / 50 Meters: Suitable for showering and swimming.
• Yago fun: Hot water, steam, or operating the crown/pushers while the watch is wet, as this can compromise the water seal.

Image: A visual guide explaining different levels of watch water resistance (3 ATM, 5 ATM, 10 ATM, 20 ATM) and their corresponding activities.

Itoju ati Itọju

• Ninu: Wipe the watch case and strap regularly with a soft, dry cloth to remove dirt and oils. For the ceramic bracelet, a slightly damp asọ le ṣee lo, atẹle nipa gbigbe.
• Yago fun Kemikali: Do not expose your watch to harsh chemicals, solvents, or detergents, as these can damage the case, strap, or seals.
• Awọn iwọn otutu: Avoid sudden temperature changes or prolonged exposure to extreme heat or cold, which can affect the watch's accuracy and seals.
• Rirọpo Batiri: The watch is powered by a quartz movement. When the battery needs replacement, it is recommended to take it to a qualified watchmaker or an authorized service center to ensure proper sealing and function.

Laasigbotitusita

• Wo Ko Ṣiṣe:
  • Check if the crown is pushed all the way in (position 0).
  • The battery may need replacement. Refer to the 'Care and Maintenance' section.
• Awọn ọwọ Chronograph Ko Tunto si odo:
  • Rii daju pe chronograph ti duro ṣaaju titẹ titari atunto.
  • If the issue persists, a recalibration or service may be required.
• Ọjọ Ko Yipada:
  • Verify the time is set correctly (AM/PM). The date typically changes around midnight.
  • Yago fun siseto ọjọ laarin 9 PM ati 3 AM.

Awọn pato

Atilẹyin ọja ati Support

Your MVMT Chrono II watch comes with a Two-Year Guarantee Láti ọjọ́ tí a rà á. Àtìlẹ́yìn yìí bo àwọn àbùkù iṣẹ́-ọnà lábẹ́ lílo déédéé. Kò bo ìbàjẹ́ tí ó bá jẹyọ láti inú ìtọ́jú tí kò tọ́, ìjàǹbá, àtúnṣe tí a kò fún ní àṣẹ, tàbí ìbàjẹ́ déédé.

For warranty claims, service, or technical support, please contact MVMT customer service through their official website or the retailer where the watch was purchased. Please retain your proof of purchase for warranty validation.