1. Ifihan
The ATOMSTACK P9 M50 is a portable and professional laser engraver designed for various materials including wood, leather, metal, and more. This manual provides essential information for safe operation, setup, and maintenance of your device, ensuring optimal performance and longevity.
2. Alaye Aabo
IKILO: Laser radiation can cause eye damage and skin burns. Always follow safety guidelines to prevent injury.
- Idaabobo Oju: The laser module includes a protective cover. While this cover helps, it is highly recommended to wear additional laser safety goggles (not included) during operation to ensure maximum eye protection.
- Iduro Pajawiri: Familiarize yourself with the emergency stop button. In case of any unexpected situation, press this button immediately to halt all machine operations. Rotate the button to disengage it before restarting.
- Afẹfẹ: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting. Consider using an exhaust system.
- Aabo Ohun elo: Do not engrave or cut unknown materials. Some materials can produce toxic fumes or catch fire. Always verify material compatibility and safety data.
- Abojuto: Never leave the machine unattended during operation. Stay within close proximity to monitor the process.
- Awọn ọmọde ati awọn ohun ọsin: Keep children and pets away from the operating area and the machine at all times.
Figure 2.1: Emergency Stop Button and Control Panel. The red button is the emergency stop, the silver button is On/Off, and the small button is Reset.
3. Package Awọn akoonu
Jẹrisi pe gbogbo awọn paati wa ninu package:
- 1 x ATOMSTACK P9 M50 Laser Engraving Machine
- Parts for screw assembly (steps 2/3/4/5)
- 1 x Anti-dust cloth
- 1 x Tool set
- 1 x Fixed focus film
- 3 x Acrylic panels
- 3 x Wood chips
- 1 x Oluka kaadi
- 5 x Awọn asopọ okun
- 1 x Accessory package
- 1 x Display assembly
- 1 x Display cable
- 1 x Oluyipada agbara
- 1 x okun agbara
- 1 x Data USB
- 1 x Metal cutting support plate
- 1 x Afowoyi
- 1 x Laser assembly
- 1 x X-axis assembly
- 1 x Y-axis assembly
- 2 x Awọn ẹsẹ atilẹyin
- 4 x Mounting spacers
4. Eto Itọsọna
The ATOMSTACK P9 M50 comes 85% pre-assembled, simplifying the setup process. Follow these steps to prepare your engraver for use:
- Ṣii silẹ: Carefully remove all components from the packaging and place them on a clean, stable surface.
- Apejọ fireemu: Connect the X-axis and Y-axis assemblies as per the included manual's diagrams. Secure them using the provided screws and tools. Ensure all connections are firm.
- Laser Module Installation: Mount the laser assembly onto the X-axis carriage. Ensure it is securely fastened and the cables are properly connected.
- Ẹsẹ atilẹyin: Attach the two support feet to the base of the machine for stability.
- Control Terminal: Connect the independent control terminal to the main unit using the display cable. The terminal features a magnetic adsorption design for easy attachment.
- Asopọ agbara: Connect the power adapter to the machine and then plug it into a suitable power outlet (100-240V AC, 50/60Hz).
- Asopọ data: For computer control, connect the machine to your computer using the provided USB data cable. Alternatively, you can use a TF card for offline operation.
Figure 4.1: Assembled ATOMSTACK P9 M50 Laser Engraver.
Figure 4.2: Independent Control Terminal connection.
5. Awọn ilana Iṣiṣẹ
5.1 Fifi sori ẹrọ ati isopọmọ sọfitiwia
The ATOMSTACK P9 M50 is compatible with popular laser engraving software:
- LaserGRBL: Supports Win XP/Win 7/Win 8/XP/Win 10.
- LightBurn: Supports Win XP/Win 7/Win 8/XP/Win 10 and Mac systems.
Download and install your preferred software from the official websites. Connect the engraver to your computer via USB. Follow the software's instructions to establish a connection and begin your projects.
Figure 5.1: Software Compatibility and Connection.
5.2 Ìkọ̀wé láìsí ìkànnì
The P9 M50 supports offline engraving via its independent control terminal and TF card, allowing operation without a continuous computer connection.
- Prepare your engraving file (NC, BMP, JPG, PNG, DXF) using your chosen software.
- Fipamọ awọn file to a TF card.
- Insert the TF card into the slot on the control terminal.
- Use the terminal's interface to select and start your engraving project.
Figure 5.2: Independent Control Terminal for Offline Engraving.
5.3 Fixed Focus Laser
The P9 M50 features a fixed-focus laser, eliminating the need for manual focus adjustment. This design ensures consistent precision and high energy density for both engraving and cutting tasks.
Figure 5.3: Fixed Focus Laser Technology.
5.4 Awọn ohun elo atilẹyin
The ATOMSTACK P9 M50 can engrave and cut a wide range of materials:
- Igi
- Oparun
- Paali
- Ṣiṣu
- Alawọ
- PCB
- Aluminiomu ohun elo afẹfẹ
- Non-reflective electroplated and painted metal
- 304 mirror stainless steel
- Gilasi
- Seramiki
- Owu
- Sileti
- Paali
- Aṣọ ti a ko hun
- Wood board (up to 15mm)
- Acrylic (black, up to 15mm)
- Some thin plastic sheets
- Kanrinkan
Figure 5.4: Dual Compression Spot Coupling Technology for Cutting.
6. Itọju
Regular maintenance ensures optimal performance and extends the lifespan of your ATOMSTACK P9 M50. Perform these tasks periodically:
- Mọ lẹnsi lesa naa: Periodically clean the laser lens with a soft, lint-free cloth and a specialized lens cleaning solution to maintain engraving precision and laser power.
- Fọ Agbegbe Iṣẹ: Remove debris, dust, and residue from the engraving area after each use to prevent interference with the laser path and machine movement.
- Lubricate Awọn ẹya gbigbe: Apply a small amount of appropriate lubricant to the guide rails and lead screws as needed to ensure smooth and precise operation of the machine's axes.
- Ṣayẹwo Awọn okun: Regularly check all power and data cables for signs of wear, fraying, or damage. Replace any damaged cables immediately to prevent electrical hazards.
7. Laasigbotitusita
This section addresses common issues you might encounter with your ATOMSTACK P9 M50.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ ko ni agbara lori | Power cable loose; power adapter faulty; emergency stop engaged | Check all power connections; ensure the emergency stop button is disengaged (rotate to unlock). Test power adapter if possible. |
| Lesa ko ibọn | Laser module not connected; software settings incorrect; material too reflective | Check laser module connection; verify software power settings (e.g., 100% power); ensure material is suitable for laser engraving/cutting. |
| Engraving is blurry or weak | Dirty laser lens; incorrect material settings; material not flat or properly positioned | Clean the laser lens; adjust power/speed settings in software for the specific material; ensure material is flat and secure on the work surface. |
| Machine not connecting to computer | USB cable faulty; driver issues; incorrect port selection in software | Try a different USB cable or port; reinstall necessary drivers for the engraver; select the correct COM port in your engraving software. |
8. Awọn pato
Detailed technical specifications for the ATOMSTACK P9 M50 Laser Engraver:
| Agbara ẹrọ | 50 W |
| Lesa Optical Power | 10-11 W |
| Lesa wefulenti | 455 ± 5 sq m |
| Yiye Engraving | 0.01 mm |
| Ọna Idojukọ | Idojukọ ti o wa titi |
| Yiyan Area | 220 x 250 mm |
| Data Gbigbe | USB connection / TF card |
| Software ti nṣiṣẹ | LaserGRBL, LightBurn |
| OS atilẹyin | Win XP/7/8/10, Mac (LightBurn) |
| Atilẹyin File Awọn ọna kika | NC, BMP, JPG, PNG, DXF |
| Agbara Input | 100-240 V AC, 50/60 Hz |
| Ijade agbara | 12V5A |
| Apapọ iwuwo | 3.5 kg |
| Awọn iwe-ẹri | CE, FCC, RoHS, FDA, PSE |
Ṣe nọmba 8.1: Awọn iwọn ọja ati awọn pato bọtini.
9. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the official ATOMSTACK webojula tabi kan si alagbata rẹ. Tọju iwe-ẹri rira rẹ bi ẹri rira.
Awọn orisun Ayelujara:
- Visit the official ATOMSTACK store on Amazon: ATOMSTACK Official Store
- For software support, visit the official webojula ti LaserGRBL ati LightBurn.