DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. Ifihan

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. Key Awọn ẹya ara ẹrọ

• Extensive Storage Support: Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ampaaye fun ibi ipamọ data.
• Ìfilọ́lẹ̀ GPU inaro: Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• Ibamu modaboudu: Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• Atilẹyin Itutu Ilọsiwaju: Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• Iṣafẹfẹ Afẹfẹ: Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• Front Panel Connectivity: Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. Awọn pato

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. Eto Itọsọna

4.1. Ngbaradi Ọran naa

1. Yọ Ẹran naa kuro: Carefully remove the computer case from its packaging.
2. Yọ Awọn Paneli ẹgbẹ kuro: Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. Ṣayẹwo Awọn Ẹya ẹrọ: Verify all included accessories (screws, cable ties, manual) are present.

4.2. Modaboudu fifi sori

1. Fi sori ẹrọ Awọn iduro: Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. Fi I/O Shield sori ẹrọ: Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. Modaboudu Oke: Fara mö rẹ modaboudu pẹlu awọn standoffs ati I/O shield. Ṣe aabo rẹ pẹlu awọn skru ti a pese.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Drive Installation (HDD/SSD)

• 3.5" HDD Installation: The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• 2.5" SSD Installation: The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. Kaadi eya aworan (GPU) fifi sori

• Fifi sori boṣewa: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• Fifi sori inaro: The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. Itutu System Oṣo

• Awọn onijakidijagan ti a ti fi sii tẹlẹ: The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. Iṣakoso USB

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

Aworan: Exploded view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. Awọn ilana Iṣiṣẹ

• Titan/Apapa: Use the power button located on the top front panel to turn the system on or off.
• Bọtini atunto: The reset button is also on the top front panel for system restarts.
• Awọn ibudo Iwaju Panel: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. Itọju

• Isọdi eruku: The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• Isọmọ inu: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. Laasigbotitusita

• Eto Ko Titan:
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • Check all internal power connections (24-pin ATX, CPU power, GPU power).
  • Verify front panel power button cables are correctly connected to the motherboard.
• Ko si Abajade Ifihan:
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • Tun awọn eya kaadi ati Ramu modulu.
• Awọn oran igbona pupọ:
  • Ensure all case fans are spinning and connected correctly.
  • Nu eruku ati awọn eroja inu rẹ.
  • Rí i dájú pé CPU cooler wà ní ipò tó yẹ, ó sì ń bá CPU náà sọ̀rọ̀ dáadáa.
• Wakọ Ko ṣe awari:
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. Atilẹyin ọja & Atilẹyin

The DARKROCK Classico Max computer case comes with a 1-odun atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn iṣelọpọ ati awọn abawọn ohun elo labẹ lilo deede.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webojula tabi kan si wọn onibara iṣẹ Eka. Jeki ẹri rira rẹ fun ijẹrisi atilẹyin ọja.

Official DARKROCK Store: DARKROCK Amazon Store

9. Media Gallery

Aworan: Iwaju-ẹgbẹ view of the DARKROCK Classico Max computer case.

Aworan: Ti abẹnu view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

Aworan: Exploded view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

Awọn fidio