SEBSON Recessed Ceiling Motion Detector (IR_ES_EA) - Anthracite

1. Ifihan

Thank you for choosing the SEBSON Recessed Ceiling Motion Detector. This device is designed for indoor use to automatically control lighting based on motion and ambient light levels. Please read this manual carefully before installation and operation to ensure proper function and safety.

2. Awọn ilana aabo

• Fifi sori gbọdọ jẹ ṣiṣe nipasẹ onisẹ ina mọnamọna ni ibamu pẹlu awọn ilana wiwọ agbegbe.
• Disconnect power at the main circuit breaker before installation or maintenance.
• Do not exceed the maximum load capacity of the detector (2000W for incandescent, 1000W for LED).
• Ọja yii jẹ apẹrẹ fun lilo inu ile nikan. Yago fun ifihan si ọrinrin tabi iwọn otutu to gaju.
• Rii daju pe fentilesonu to dara ni ayika ẹrọ naa.

3. Awọn ẹya Ọja

• Indoor motion detector for recessed ceiling mounting.
• Wide detection range of 8 meters and 360 degrees.
• Adjustable operating duration from 10 seconds to 30 minutes.
• Ìmọ́lẹ̀ àyíká tí a lè ṣàtúnṣe láti 3 sí 2000 lux.
• Compatible with LED lighting (max 1000W) and incandescent bulbs (max 2000W).
• 3-wire connection for reliable operation.

4. Package Awọn akoonu

• 1x SEBSON Recessed Ceiling Motion Detector (Anthracite)
• 1x Ilana itọnisọna

5. fifi sori

Pataki: Ensure power is disconnected at the main circuit breaker before starting installation.

1. Prepare a mounting hole in the ceiling with a diameter of 63-66 mm. Ensure there is sufficient depth (minimum 45 mm) for the detector.
2. Connect the wiring according to the diagram below. The detector requires a 3-wire connection (Live, Neutral, Switched Live).
3. Insert the detector into the prepared hole. The spring clips will secure it in place.
4. Mu agbara pada ki o si danwo iṣẹ naa.

5.1. Ọja Ipariview ati Awọn iwọn

6. Ṣiṣẹ ati Awọn atunṣe

The motion detector features two adjustable dials on the back for 'TIME' (duration) and 'LUX' (light sensitivity).

6.1. TIME Adjustment

The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. Rotate the dial to set the desired duration:

• 10s: Minimum duration (10 seconds).
• 30 min: Maximum duration (30 minutes).

6.2. LUX Adjustment

The 'LUX' dial determines the ambient light level at which the detector will activate. This allows the light to only turn on when it's dark enough.

• 3: Activates only in very dark conditions (e.g., night).
• 2000: Activates in all light conditions (day and night).

To set the LUX level, turn the dial to the sun symbol (2000 lux) for testing during daylight. Once satisfied with the detection, adjust the dial towards the moon symbol (3 lux) to the desired ambient light level for automatic operation.

6.3. Ibiti wiwa

The detector has a 360° detection angle and a maximum range of 8 meters. Optimal installation height is between 1.8m and 4m. Avoid installing near heat sources, direct sunlight, or areas with significant air movement (e.g., air conditioning vents) to prevent false triggers.

7. Itọju

The SEBSON motion detector requires minimal maintenance. Ensure the sensor lens is kept clean and free from dust or obstructions. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

8. Laasigbotitusita

9. Awọn pato

10. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.