1. Alaye Aabo pataki
Please read this entire manual carefully before using the heater. Failure to follow these instructions could result in fire, electric shock, injury, or property damage. Keep this manual for future reference.
- Ibi: Always place the heater on a firm, level surface. Do not place on soft surfaces like beds or rugs where openings may be blocked.
- Iyọkuro: Maintain a minimum distance of 1 meter (3 feet) from walls, furniture, curtains, and other combustible materials.
- Ibi ti ina elekitiriki ti nwa: Ensure the heater is connected to a grounded outlet of the correct voltage (220-240V, 50Hz). Do not overload electrical circuits.
- Awọn okun Ifaagun: Avoid using extension cords. If one is necessary, ensure it is heavy-duty and rated for the heater's wattage.
- Ọrinrin: Ma ṣe lo ẹrọ igbona ni tutu tabi damp locations, such as bathrooms or laundry areas. Keep away from water sources.
- Abojuto: Do not leave the heater unattended while in use. Always unplug the heater when not in use.
- Awọn ọmọde ati awọn ohun ọsin: Keep children and pets away from the heater. The surface can become hot during operation.
- Idaabobo igbona ju: This heater is equipped with an automatic overheat protection system. If the heater overheats, it will shut off automatically. Unplug the heater, allow it to cool for 30 minutes, then plug it back in.
- Italolobo-Lori Yipada: The heater includes a safety tip-over switch that automatically turns off the unit if it is accidentally knocked over.
- Itọju: Má ṣe gbìyànjú láti tún ẹ̀rọ ìgbóná náà ṣe tàbí láti ṣe àtúnṣe rẹ̀ fúnra rẹ. Tọ́ka gbogbo iṣẹ́ ìtọ́jú náà sí àwọn òṣìṣẹ́ tó mọ̀ nípa rẹ̀.
2. Package Awọn akoonu
Fi pẹ̀lẹ́pẹ̀lẹ́ tú àpótí náà kí o sì rí i dájú pé gbogbo nǹkan wà níbẹ̀ tí wọ́n sì wà ní ipò tó dára.
- Amazon Basics Portable Ceramic Electric Heater
- Remote Control (with 1 x 12V battery included)
- Itọsọna olumulo
3. Ọja Ipariview
Familiarize yourself with the components and controls of your heater.
olusin 1: Iwaju view of the Amazon Basics Portable Ceramic Electric Heater.
Ibi iwaju alabujuto ati Ifihan
Figure 2: Digital control panel and display showing current temperature.
- Bọtini agbara: Ó máa ń tan tàbí pa ẹ̀rọ ìgbóná.
- Bọtini Ipo: Cycles through heating modes (High, Medium, Low, ECO, Fan Only).
- Awọn bọtini Soke/Isalẹ iwọn otutu: Adjusts the desired temperature (5-35°C).
- Bọtini Oscillation: Activates or deactivates the 70° oscillation function.
- Bọtini Aago: Ó ṣètò aago tó ṣeé ṣe fún wákàtí méjìlá.
- Ifihan Digital: Shows current temperature, selected mode, and timer settings.
Isakoṣo latọna jijin
The remote control provides convenient access to all heater functions. Ensure the 12V battery is correctly installed.
Figure 3: The heater shown with its included remote control.
4. Eto
- Yọọ kuro: Remove the heater and all packaging materials from the box.
- Ibi: Place the heater on a stable, flat, and heat-resistant surface. Ensure it is at least 1 meter (3 feet) away from any walls, furniture, or other objects.
- Asopọ agbara: Plug the power cord into a standard 220-240V, 50Hz grounded electrical outlet. Ensure the outlet is not overloaded by other appliances.
- Batiri Iṣakoso Latọna jijin: If not already installed, open the battery compartment on the remote control and insert the 12V battery, observing correct polarity.
5. Awọn ilana Iṣiṣẹ
Titan / Paa
- Tẹ awọn Bọtini agbara on the control panel or remote control to turn the heater on. The digital display will illuminate.
- Tẹ awọn Bọtini agbara again to turn the heater off.
Selecting Heating Mode
With the heater on, press the Bọtini ipo repeatedly to cycle through the available modes:
- Ooru giga: Provides maximum heating output (1800W).
- Ooru Alabọde: Provides moderate heating output.
- Ooru Kekere: Provides minimal heating output.
- Ipo ECO: The heater automatically adjusts its power output to maintain the set temperature, optimizing energy consumption.
- Olufẹ Nikan: Operates as a fan without heat.
Eto iwọn otutu
In any heating mode (High, Medium, Low, ECO), you can set your desired temperature:
- Lo awọn Temperature Up (+) or Isalẹ (-) buttons on the control panel or remote control.
- The temperature can be set between 5°C and 35°C, with precise 1°C adjustments.
- Agbára ìgbóná náà yóò tan tàbí pa á láìfọwọ́sí láti mú kí ìwọ̀n otútù tí a ṣètò dúró.
Oscillation Išė
To distribute heat evenly across a wider area:
- Tẹ awọn Bọtini oscillation on the control panel or remote control. The heater will begin to rotate 70° from side to side.
- Tẹ awọn Bọtini oscillation again to stop the oscillation.
Ṣiṣeto Aago
The 24-hour programmable timer allows you to set a duration for the heater to operate before automatically turning off.
- With the heater on, press the Bọtini aago. The display will show "00".
- Lo awọn Temperature Up (+) or Isalẹ (-) buttons to set the desired number of hours (1-24).
- Once the desired time is set, the timer will activate after a few seconds. The display will show the remaining time before switching back to the temperature display.
- Lati fagilee aago, tẹ awọn Bọtini aago until "00" is displayed, or turn off the heater.
6. Itọju
Regular cleaning and proper storage will help ensure the longevity and efficient operation of your heater.
Ninu
- Yọ ẹrọ ti ngbona kuro nigbagbogbo kí o sì jẹ́ kí ó tutu pátápátá kí o tó fọ̀ ọ́ mọ́.
- Mu ese ita gbangba pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
- Lo ẹ̀rọ ìfọṣọ pẹ̀lú ohun èlò ìfọṣọ láti fi rọra yọ eruku kúrò nínú àwọn ohun èlò ìfàfẹ́ afẹ́fẹ́ àti àwọn ohun èlò ìtújáde.
- Ensure no water or liquids enter the interior of the heater.
Ibi ipamọ
- Unplug the heater and allow it to cool completely.
- Clean the heater as described above.
- Store the heater in its original packaging or a suitable container in a cool, dry place.
- Má ṣe gbé àwọn nǹkan tó wúwo sí orí ẹ̀rọ ìgbóná nígbà tí o bá ń kó wọn pamọ́.
7. Laasigbotitusita
If you experience issues with your heater, refer to the following common problems and solutions.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Alagbona ko ni tan-an. | Ko si ipese agbara. Tip-lori yipada ṣiṣẹ. Idaabobo igbona ti mu ṣiṣẹ. | Rii daju pe okun agbara ti wa ni edidi ni aabo sinu iṣan-iṣẹ iṣẹ kan. Gbe ẹrọ igbona sori alapin, dada iduroṣinṣin. Unplug, wait 30 minutes for cooling, then plug back in. |
| Alagbona gbejade ko si ooru. | Fan Only mode selected. Eto iwọn otutu ti lọ silẹ ju. | Select a heating mode (High, Medium, Low, ECO). Increase the desired temperature setting above the current room temperature. |
| Oscillation ko ṣiṣẹ. | Iṣẹ oscillation ko mu ṣiṣẹ. | Tẹ bọtini Oscillation lati mu ṣiṣẹ. |
| Isakoṣo latọna jijin ko ṣiṣẹ. | Batiri ti pari tabi ti a fi sori ẹrọ ti ko tọ. Idilọwọ laarin isakoṣo latọna jijin ati igbona. | Replace the 12V battery or ensure correct polarity. Yọọ eyikeyi nkan ti o dina ọna ifihan. |
Tí ìṣòro náà bá ń bá a lọ lẹ́yìn tí a ti gbìyànjú àwọn ìdáhùn wọ̀nyí, kan si ìrànlọ́wọ́ oníbàárà.
8. Awọn pato
Technical details for the Amazon Basics Portable Ceramic Electric Heater.
Figure 4: Dimensions of the heater: 17cm (L) x 15.5cm (W) x 25.4cm (H).
- Nọmba awoṣe: DQ2508R-EU
- Brand: Amazon Awọn ipilẹ
- Iru: Portable Ceramic Electric Heater
- Ijade agbara: 1800W
- Voltage: 220-240V
- Igbohunsafẹfẹ: 50Hz
- Awọn iwọn (L x W x H): 17 cm x 15.5 cm x 25.4 cm
- Ìwúwo: O to 1.7 kg
- Oscillation: 70°
- Iwọn otutu: 5°C - 35°C
- Awọn ẹya pataki: Overheat Protection, Tip-Over Switch, Digital Display, Remote Control, 24-Hour Timer, ECO Mode
- Àwọ̀: Grẹy
- Abe ile/ita gbangba Lo: Lilo inu ile Nikan
9. Atilẹyin ọja ati Support
For warranty information or customer support, please refer to the documentation provided at the time of purchase or visit the official Amazon Basics website. Do not attempt to open or repair the product yourself, as this may void the warranty and pose safety risks.