Generic 4-in-1 Multi-Functional Trimming Tool User Manual

1. Ifihan

O ṣeun fun riraasing the Generic 4-in-1 Multi-Functional Trimming Tool. This versatile garden tool system is designed to simplify your outdoor maintenance tasks by combining a gas pole saw, hedge trimmer, grass trimmer, and brush cutter into one powerful unit. Powered by a 33cc 2-cycle engine, this tool offers efficiency and durability for various landscaping needs.

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

2. Alaye Aabo

IKILO: Ka gbogbo awọn ikilo ailewu ati ilana. Ikuna lati tẹle awọn ikilọ ati awọn itọnisọna le ja si mọnamọna, ina, ati/tabi ipalara nla.

2.1 Gbogbogbo Abo Ofin

• Ohun elo Idaabobo Ti ara ẹni (PPE): Always wear safety glasses or goggles, hearing protection, heavy-duty gloves, long pants, and sturdy, non-slip footwear. A safety helmet is recommended when using the pole saw.
• Agbegbe Iṣẹ: Keep the work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating the tool.
• Mimu epo: Mix and store fuel in a well-ventilated area, away from sparks or open flames. Do not smoke while handling fuel. Always allow the engine to cool before refueling.
• Ayẹwo Irinṣẹ: Before each use, inspect the tool for loose parts, damage, or wear. Do not operate a damaged tool.
• Dimu ti o tọ: Always maintain a firm grip on the tool handles with both hands during operation.
• Yago fun ifẹhinti: Be aware of potential kickback, especially when using the brush cutter blade or pole saw.
• Ajogba ogun fun gbogbo ise: Keep a first aid kit readily available.

2.2 idana Aabo

• This tool uses a 2-stroke gasoline engine. Always mix gasoline with 2-cycle oil at the specified ratio (Gasoline 30: Two-cycle oil 1).
• Use fresh, clean unleaded gasoline with an octane rating of 87 or higher.
• Never use straight gasoline or automotive oil in the fuel mixture.
• Tọju epo sinu apo ti a fọwọsi.

3. Package Awọn akoonu

Carefully unpack all components and check against the list below. If any parts are missing or damaged, contact your retailer.

• Power Head (Engine Unit)
• Okun Trimmer Asomọ
• Brush Cutter Attachment (with blade)
• Hejii Trimmer Asomọ
• Ọpá Ri Asomọ
• Bottle Mixer (for fuel)
• Tool Kit (wrenches, screwdriver, bolts)
• Itọsọna olumulo

Image: All components included in the package, including the power head, various attachments, fuel mixing bottle, and tools.

Image: Close-up of the accessory tool kit, showing a spark plug wrench, open-end wrench, Allen keys, mounting bolts, and a knob.

4. Eto ati Apejọ

4.1 Idana Dapọ

1. Obtain fresh unleaded gasoline (minimum 87 octane) and quality 2-cycle engine oil.
2. Using the provided mixing bottle, mix gasoline and 2-cycle oil at a ratio of 30:1. For example, for 900ml of fuel, use 30ml of 2-cycle oil.
3. Shake the mixture thoroughly before pouring it into the fuel tank.
4. Ensure the fuel cap is securely tightened after refueling.

4.2 Attaching the Shaft and Handle

1. Connect the main shaft to the engine power head. Align the splines and secure with the locking mechanism.
2. Attach the D-handle or bicycle-style handle to the main shaft at a comfortable operating position. Tighten all bolts securely.

Image: The engine power head with the main shaft and control handle assembled, ready for attachment installation.

4.3 Attaching the Desired Tool

The tool-free quick attachment changing system allows for easy swapping of attachments.

1. Ensure the engine is off and cooled down before changing attachments.
2. Align the attachment shaft with the main shaft.
3. Push the attachment into place until it clicks or the locking pin engages.
4. Secure with the tightening knob or lever.

4.3.1 Grass Trimmer / Brush Cutter Assembly

1. Attach the lower shaft with the gear head to the main shaft.
2. For the grass trimmer, install the nylon line head. For the brush cutter, install the metal blade, ensuring the blade is correctly oriented and secured with the provided nuts and washers.
3. So oluso aabo.

Image: The 4-in-1 tool fully assembled as a grass trimmer, showing the engine, shaft, handle, and trimmer head with guard.

4.3.2 Hedge Trimmer Assembly

1. Attach the hedge trimmer head to the main shaft.
2. Ensure the articulating head is locked into the desired angle before operation.

Image: The 4-in-1 tool fully assembled as a hedge trimmer, showing the engine, shaft, handle, and hedge trimmer attachment.

4.3.3 Pole Saw Assembly

1. Attach the pole saw head to the main shaft.
2. Fill the chain oil reservoir with SAE#10W-30 or similar bar oil.
3. Ensure the chain tension is correct.

Image: Close-up of the pole saw attachment, showing the saw chain, bar, and oil reservoir.

5. Awọn ilana Iṣiṣẹ

5.1 Bibẹrẹ Engine

1. Gbe ohun èlò náà sí orí ilẹ̀ tí ó tẹ́jú, tí ó dúró ṣinṣin.
2. Ensure the fuel tank is filled with the correct fuel mixture.
3. Ṣètò ìyípadà ON/OFF sí ipò 'ON'.
4. Move the choke lever to the 'CLOSED' or 'START' position.
5. Tẹ boolubu alakoko ni igba pupọ titi ti epo yoo fi han.
6. Pull the starter cord firmly and smoothly until the engine attempts to start (usually 1-3 pulls).
7. Once the engine attempts to start, move the choke lever to the 'OPEN' or 'RUN' position.
8. Fa okùn ìbẹ̀rẹ̀ náà lẹ́ẹ̀kan síi títí tí ẹ̀rọ náà yóò fi bẹ̀rẹ̀.
9. Gba engine laaye lati gbona fun awọn iṣẹju diẹ ṣaaju ki o to kopa ninu fifa.

5.2 Using the Grass Trimmer

Ideal for trimming grass and weeds around obstacles.

• Mu ọpa naa duro ṣinṣin pẹlu ọwọ mejeeji.
• Maintain a safe distance from objects and bystanders.
• Use a sweeping motion to cut grass.
• Tap the trimmer head on the ground to advance the nylon line if needed.

Image: A person demonstrating the use of the grass trimmer attachment, showing proper grip and posture.

5.3 Lilo Ohun Èlò Gé Bọ́rì

Suitable for cutting thick brush and dense weeds.

• Ensure the correct metal blade is securely installed.
• Always wear appropriate leg protection.
• Approach brush slowly and cut in small sections to avoid kickback.
• Keep the blade clear of rocks, metal, and other hard objects.

5.4 Lilo Hejii Trimmer

Designed for shaping and trimming hedges and shrubs.

• Adjust the articulating head to the desired angle.
• Hold the tool firmly and use a smooth, even motion.
• Avoid cutting branches thicker than the recommended capacity of the blades.
• Keep hands and body clear of the cutting blades.

Image: A person demonstrating the use of the hedge trimmer attachment, showing how to trim a hedge.

5.5 Lilo Polu Ri

For pruning high branches.

• Ensure the chain oil reservoir is filled.
• Always maintain a stable footing and balance.
• Avoid cutting directly overhead.
• Make relief cuts to prevent pinching and kickback.
• Ṣe akiyesi awọn ẹka ti o ṣubu.

Image: A person demonstrating the use of the pole saw attachment to prune a high branch.

6. Itọju

Regular maintenance ensures optimal performance and extends the life of your tool. Always ensure the engine is off and cool before performing any maintenance.

6.1 Engine Itọju

• Sipaki plug: Inspect and clean the spark plug every 25 hours of operation. Replace if worn or fouled.
• Asẹ afẹfẹ: Clean the air filter regularly, especially in dusty conditions. Wash with soap and water, allow to dry completely, and lightly oil before reinstallation.
• Ajọ epo: Inspect and replace the fuel filter annually or if fuel flow is restricted.

6.2 Ìtọ́jú Àsopọ̀

• Awọn abẹfẹlẹ: Keep all cutting blades (brush cutter, hedge trimmer, pole saw chain) sharp and free of debris. Sharpen or replace as needed.
• Nylon Line: Replace the nylon line on the grass trimmer when it becomes too short or worn.
• Lubrication: Lubricate gear heads and moving parts as specified in the manual for each attachment. For the pole saw, ensure adequate bar oil supply.

6.3 Ibi ipamọ

• Drain the fuel tank if storing for more than 30 days. Run the engine until it stops from lack of fuel.
• Mọ ọpa daradara ṣaaju ipamọ.
• Store in a dry, well-ventilated area, out of reach of children.

7. Laasigbotitusita

8. Awọn pato

• Brand: Gbogboogbo
• Awoṣe: 4-in-1 Multi-Functional Trimming Tool
• Yipada Enjini: 33cc
• Iru ẹrọ: Air Cooled 2-Stroke Gasoline Engine
• Agbara ẹṣin: 1.6 HP
• O pọju. Iyara ẹrọ: 11,000 RPM
• Fuel Mix Ratio: Gasoline 30: Two-cycle oil 1
• Agbara Epo epo: 900ml
• Bar Oil Type (Pole Saw): SAE#10W-30 or similar
• Bẹrẹ Iru: Bẹrẹ Ibẹrẹ
• Ohun elo abẹfẹlẹ: Ga Erogba Irin
• Awọn iwọn ọja: 83"L x 12"W x 12"H (tí a kó jọ)
• Ìwọ̀n Nkan: Approximately 540 pounds (Note: This weight seems unusually high for a handheld tool. Please verify with manufacturer if concerned.)
• Awọn iwe-ẹri: EPA Compliant

9. Atilẹyin ọja ati Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer directly. Keep your proof of purchase for any warranty claims.

For technical support or replacement parts, please contact the manufacturer or your authorized service center. Always provide the model number and purchase date when seeking assistance.