1. Ifihan
Thank you for choosing the CYCLAMI A2S Electric Mini Bike Pump. This compact and portable pump is designed for efficient and precise tire inflation for various bicycles, featuring a digital manometer and automatic stop function. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.
2. Package Awọn akoonu
Daju pe gbogbo awọn nkan wa ninu apo rẹ:
- 1 x CYCLAMI A2S Electric Mini Bike Pump
- 1 x Silicone Protective Cover
- 1 x Schrader àtọwọdá Adapter
- 1 x Presta àtọwọdá Adapter
- 1 x Ball Needle Adapter
- 1 x Inflatable Hose (Schrader compatible)
- 1 x USB Iru-C Okun Ngba agbara
Image 2.1: Contents of the CYCLAMI A2S package, including the pump, silicone cover, various valve adapters, ball needle, hose, and USB-C cable.
3. Awọn ẹya Ọja
- Iwapọ ati Gbigbe: Weighs only 136g and measures 7.6 x 4.5 x 2.8 cm, making it easy to carry and store.
- Digital Manometer: Equipped with a professional LED digital manometer displaying real-time pressure with an accuracy of ±1 PSI. Supports PSI and Bar units.
- Ife-owo ti o yara: Inflates from 0 to 80 PSI in approximately 50 seconds, with a maximum air pressure of 120 PSI.
- Iduro Aifọwọyi: Automatically stops inflation once the preset pressure is reached, preventing over-inflation.
- Ibamu Valve Meji: Compatible with both Schrader and Presta valves (2-in-1 design).
- Batiri gbigba agbara: 500mAh battery, capable of inflating up to 6 tires on a full charge.
- Ngba agbara USB Iru-C: Quick charging, full in approximately 45 minutes.
Image 3.1: The CYCLAMI A2S Electric Mini Bike Pump, showcasing apẹrẹ kekere rẹ ati ifihan oni-nọmba rẹ.
Image 3.2: The pump held in a hand, illustrating its compact and lightweight design (approx. 136g) for easy portability.
4. Alaye Aabo
- The pump may become hot during prolonged use. Handle with caution.
- The pump produces a certain level of noise (over 80dB). Use in appropriate environments.
- Do not leave the pump unattended while operating.
- Jeki kuro ni arọwọto awọn ọmọde.
- Ma ṣe fi han si omi tabi awọn iwọn otutu to gaju.
- Ensure the correct pressure is set for your tire to avoid over-inflation and potential damage or injury. Refer to your tire's sidewall for recommended pressure.
5. Eto
5.1 Gbigba agbara fun fifa soke
- Connect the provided USB Type-C cable to the charging port on the pump.
- Connect the other end of the cable to a USB power source (e.g., wall adapter, power bank, computer).
- The LED display will indicate charging status. A full charge takes approximately 45 minutes.
Image 5.1: The CYCLAMI A2S pump being charged via its USB Type-C port, indicating a full charge in 45 minutes.
5.2 Attaching the Valve Adapter
The pump is compatible with both Schrader (AV) and Presta (FV) valves. The inflatable hose is primarily for Schrader valves, and a separate adapter is provided for Presta valves.
- For Schrader Valves: Directly screw the inflatable hose onto the pump's output port, then firmly attach the other end of the hose to the tire's Schrader valve.
- For Presta Valves: First, screw the Presta adapter onto the tire's Presta valve. Then, attach the inflatable hose to the Presta adapter.
Image 5.2: The pump connected to a tire valve using the extension hose for stable inflation.
6. Awọn ilana Iṣiṣẹ
6.1 Agbara Tan / Pa
- Tẹ mọlẹ bọtini agbara (⏻) to turn the pump on or off.
6.2 Ṣíṣeto titẹ ti a fẹ
- Once powered on, the digital display will show the current tire pressure.
- Use the '+' and '-' buttons to adjust the target pressure. The display will show the preset value.
- Refer to your tire's sidewall for the recommended pressure range.
6.3 Bibẹrẹ ati Idaduro Afikun
- After setting the desired pressure, press the power button (⏻) to start inflation.
- The pump will automatically stop once the preset pressure is reached.
- Láti fi ọwọ́ dá ìfúnpọ̀ owó dúró nígbàkigbà, tẹ bọ́tìnnì agbára (⏻) lẹẹkansi.
Image 6.1: The pump in operation, inflating a tire to a preset pressure, with the digital display showing the current status.
7. Itọju
- Ninu: Wipe the pump with a soft, dry cloth. Do not use harsh chemicals or immerse in water.
- Ibi ipamọ: Tọju fifa soke ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
- Itọju Batiri: For optimal battery life, charge the pump fully before long-term storage and recharge every 3-6 months if not in use.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Fifa ko tan | Batiri kekere; Bọtini agbara ko tẹ ni deede | Charge the pump; Press and hold the power button for 2-3 seconds |
| Pump inflates slowly or not at all | Valve not properly connected; Hose leak; Obstruction | Ensure secure connection; Check hose for damage; Inspect valve for debris |
| Pump n gbona lakoko lilo | Normal operation during prolonged use | Allow pump to cool down between uses; Use the silicone protective cover |
| Kika titẹ ti ko pe | Valve connection not secure; Sensor issue | Ensure secure connection; Contact customer support if issue persists |
9. Awọn pato
- Awoṣe: A2S
- Brand: CYCLAMI
- Ohun elo: Aluminiomu
- Àwọ̀: Dudu
- Awọn iwọn: 7.6 x 4.5 x 2.8 cm (isunmọ.)
- Ìwúwo: 136 giramu (isunmọ.)
- Ipa ti o pọju: 120 PSI
- Agbara Batiri: 500mAh
- Ibudo gbigba agbara: USB Iru-C
- Orisun Agbara: Agbara Batiri
Image 9.1: Dimensions of the mini pump, highlighting its compact size.
10. Atilẹyin ọja ati Support
For warranty information or technical support, please refer to the product packaging or contact CYCLAMI customer service directly through their official webaaye tabi alagbata ti o ti ra ọja naa. Tọju iwe-ẹri rira rẹ bi ẹri rira.