Mexen Velar Duo Sliding Shower Enclosure

Ọrọ Iṣaaju

Thank you for choosing the Mexen Velar Duo Sliding Shower Enclosure. This manual provides essential information for the safe installation, operation, and maintenance of your new shower enclosure. Please read these instructions carefully before beginning installation and retain them for future reference.

Aworan: Iwaju view of the Mexen Velar Duo Sliding Shower Enclosure. This image shows the overall design of the shower enclosure with its sliding door and gun gray brushed profiles.

Awọn Itọsọna Aabo

• Máa lo ohun èlò ààbò ara ẹni tó yẹ (PPE) nígbà tí o bá ń fi sori ẹrọ, títí kan àwọn gíláàsì ààbò àti ibọ̀wọ́.
• Ensure the installation area is clean, dry, and well-lit.
• Handle glass panels with extreme care. Tempered glass is strong but can shatter if struck at the edges.
• Verify that wall structures are capable of supporting the weight of the shower enclosure.
• Do not use abrasive cleaners or tools that could scratch the glass or profiles.
• Rii daju pe gbogbo awọn asopọ ko ni omi lati yago fun awọn n jo.
• Children should not be allowed to play with or around the shower enclosure during or after installation.

Package Awọn akoonu

Kí o tó bẹ̀rẹ̀ sí í fi sori ẹrọ, jọ̀wọ́ rí i dájú pé gbogbo àwọn ẹ̀yà ara rẹ̀ wà níbẹ̀ tí wọn kò sì ní bàjẹ́.

• Shower Enclosure Glass Panels (Tempered Glass)
• Sliding Door Mechanism Components
• odi Profiles (Gun Gray Brushed)
• Awọn edidi oofa
• Mounting Kit (screws, anchors, gaskets, etc.)
• Awọn imudani

Eto ati fifi sori

The Mexen Velar Duo shower enclosure requires assembly and screw-mounted installation. It is recommended that two people perform the installation due to the weight and size of the glass panels.

1. Igbaradi: Unpack all components and inspect for damage. Ensure the shower tray or tiled floor is level and clean.
2. odi Profile Ibi: Ipo odi profiles against the wall where the enclosure will be installed. Use a spirit level to ensure they are perfectly vertical. Mark the drilling points. The adaptive wall profiles are designed to compensate for minor wall unevenness.
3. Liluho ati Ifipamọ: Drill holes at the marked points and insert appropriate wall anchors. Secure the wall profiles to the wall using the provided screws.
4. Fixed Panel Installation: Carefully place the fixed glass panels into the wall profiles. Ensure they are properly seated and secured according to the detailed instructions in the mounting kit.
5. Sliding Door Assembly: Assemble the sliding door mechanism, including rollers and guides, onto the moving glass panel.
6. Sliding Door Installation: Mount the sliding door onto the tracks. Test the sliding action to ensure it moves smoothly.
7. Handle and Seal Installation: Attach the handles to the sliding door. Install the magnetic seals along the edges of the door and fixed panels to ensure a watertight closure.
8. Awọn atunṣe ipari: Make any necessary adjustments to ensure the door slides freely and seals correctly. Apply silicone sealant to the exterior joints between the profiles and the wall/shower tray as instructed to prevent water leakage.

Image: The Mexen Velar Duo Shower Enclosure installed in a modern bathroom setting, showcasing ìṣọ̀kan ẹwà rẹ̀.

Image: The Mexen Velar Duo Shower Enclosure with its sliding door partially open, demonstrating the access width.

Aworan: Isunmọ view of the Mexen wall profile, showing the brushed gun gray finish and subtle branding.

Awọn ilana Iṣiṣẹ

The Mexen Velar Duo features a smooth-gliding sliding door with a soft-close mechanism for enhanced user comfort.

• Ṣii ilẹkun: Gently slide the door along its track using the handle.
• Titi ilẹkun: Push the door towards the closed position. The soft-close mechanism will engage, allowing the door to close smoothly and quietly without slamming.
• Ididi: The magnetic seals ensure a tight closure, preventing water from escaping the enclosure during use. Ensure the door is fully closed for optimal sealing.

Aworan: Alaye view of the bottom track and magnetic seal, illustrating the water-tight design.

Itoju

Regular cleaning and proper care will ensure the longevity and pristine appearance of your Mexen shower enclosure.

• Fifọ Gilasi: The glass panels feature a self-cleaning nano-coating that minimizes limescale buildup. For daily cleaning, wipe the glass with a soft cloth and warm water after each use. For deeper cleaning, use a mild, non-abrasive glass cleaner. Avoid harsh chemicals or abrasive sponges.
• Profile Ninu: The gun gray brushed profiles are resistant to detergents. Clean them with a soft cloth and a mild, non-abrasive cleaning agent. Do not use abrasive cleaners, scouring pads, or solvents, as these can damage the finish.
• Itoju edidi: Periodically check the magnetic seals for wear or damage. Clean them gently with warm soapy water. Replace worn seals to maintain water tightness.
• Roller and Track Maintenance: Keep the sliding door rollers and tracks free from dirt and debris. Clean them regularly to ensure smooth operation. A small amount of silicone-based lubricant can be applied to the rollers if they become stiff.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

For information regarding warranty coverage, technical support, or replacement parts, please refer to the documentation provided with your purchase or contact Mexen customer service directly. Keep your proof of purchase for warranty claims.