Streamlight 69478 TLR-8 HL-X G sub USB 1000-Lumen Weapon Rail-Mounted Rechargeable Tactical Flashlight with Integrated Green Aiming Laser User Manual

Ọja Pariview

The Streamlight TLR-8 HL-X G sub USB is a compact, high-performance weapon-mounted tactical light designed for precision and reliability. It features a powerful 1000-lumen white light and an integrated green aiming laser, making it suitable for various tactical applications. This model is specifically designed for select 1913 short-railed weapons.

olusin 1: Iwaju view of the Streamlight TLR-8 HL-X G sub tactical flashlight, showing the light and laser module.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• TLR-8 G HL-X sub USB Weapon Light
• 1x SL-B9 Rechargeable Battery
• Okun USB-C
• Interchangeable High and Low Switches
• Key Kit and Multi-tool
• Itọsọna olumulo (Itọsọna yii)

Eto ati fifi sori

1. Fifi sori batiri ati gbigba agbara

The TLR-8 HL-X G sub uses a rechargeable SL-B9 Li-Ion battery. Ensure the battery is fully charged before first use.

1. Unscrew the bezel of the light to access the battery compartment.
2. Insert the SL-B9 rechargeable battery with the positive (+) end facing towards the light head.
3. Securely screw the bezel back on.
4. To charge, connect the USB-C cable to the light's USB-C port and to a power source. The charging indicator will show charging status.

Figure 2: The SL-B9 rechargeable battery and the TLR-8 HL-X G sub, illustrating battery type.

2. Mounting to a Weapon Rail

The TLR-8 HL-X G sub is designed for select 1913 short-railed weapons. Use the rail grip clamp system for secure attachment.

1. Ensure the firearm is unloaded and safe before handling.
2. Loosen awọn iṣinipopada clamp screw on the TLR-8 HL-X G sub.
3. Align the light with the desired rail slot on your weapon.
4. Push the light onto the rail until the crossbar engages with a rail slot.
5. Mu iṣinipopada clamp screw firmly by hand. No tools are typically required for initial attachment.

Akiyesi ibamu:

This device is exclusively designed for use with the following 1913 short-railed weapons: Smith & Wesson M&P M2.0 subcompact, Beretta Px4 Storm subcompact, Springfield Armory XD-E, XD-S and Hellcat Pro, Heckler & Koch HK45 compact, and Sig Sauer P365 XMACRO. Verify compatibility before attempting installation.

Figure 3: The TLR-8 HL-X G sub showing its rail mounting mechanism.

3. Changing Rear Paddle Switches

The TLR-8 HL-X G sub comes with interchangeable ambidextrous rear paddle switches (high and low) to suit user preference. Use the provided multi-tool for this operation.

1. Using the multi-tool, carefully remove the existing paddle switch.
2. Align the desired new paddle switch (high or low) with the slot.
3. Press firmly until it clicks into place, ensuring it is securely seated.

Figure 4: Illustration of the high and low paddle switches, demonstrating the interchangeable design.

Awọn ilana Iṣiṣẹ

1. Basic Operation (Light and Laser Modes)

The TLR-8 HL-X G sub features three primary modes: LED light only, LED/laser combo, and laser only.

• Ìmúṣiṣẹ́ fún ìgbà díẹ̀: Press and hold either ambidextrous paddle switch. Release to turn off.
• Nigbagbogbo Lori: Quickly tap either paddle switch. Tap again to turn off.
• Aṣayan Ipo: To cycle through modes (Light Only, Light/Laser, Laser Only), press and hold one paddle switch, then quickly tap the other paddle switch. Release both to set the desired mode. The device will remember the last selected mode.

2. Strobe Mode

The strobe mode can be user-enabled for tactical situations.

• To activate strobe, quickly double-tap either paddle switch.
• To deactivate strobe, quickly double-tap again or turn the light off and on.

3. Laser Adjustment (Zeroing)

The integrated green laser can be adjusted for windage and elevation to ensure accuracy. Use the provided multi-tool or a suitable small hex wrench (e.g., 1.3mm hex) for adjustment.

1. Identify the windage (horizontal) and elevation (vertical) adjustment screws on the side and bottom of the unit.
2. Using the appropriate tool, turn the screws incrementally to adjust the laser point of aim.
3. Atunse Igbega: Turning the screw marked "D/U" (Down/Up) will move the laser vertically.
4. Atunse Afẹfẹ: Turning the screw marked "R/L" (Right/Left) will move the laser horizontally.
5. Perform live-fire zeroing at a safe range to fine-tune the laser's accuracy with your firearm.

olusin 5: Apa view of the TLR-8 HL-X G sub, highlighting the laser adjustment screws for windage and elevation.

4. Safe Off Feature

The TLR-8 HL-X G sub includes a "Safe Off" feature to prevent accidental activation and conserve battery life. To engage or disengage, rotate the head of the light approximately 1/4 turn counter-clockwise from the fully tightened position. This will mechanically disconnect the battery circuit.

Itọju ati Itọju

• Ninu: Lo asọ, damp cloth to clean the exterior of the light. For the lens, use a lens cleaning cloth and solution to avoid scratching. Do not use abrasive cleaners.
• Itọju Batiri: Store the SL-B9 battery in a cool, dry place when not in use. Recharge regularly to maintain optimal performance. Avoid fully depleting the battery for extended periods.
• O-Oruka: Máa ṣàyẹ̀wò àwọn òrùka O lẹ́ẹ̀kọ̀ọ̀kan bóyá wọ́n ti bàjẹ́ tàbí wọ́n ti bàjẹ́. Fi òróró sílíkónì díẹ̀ sí i láti jẹ́ kí omi má baà bàjẹ́.
• Ibi ipamọ: When storing the light for extended periods, engage the "Safe Off" feature or remove the battery to prevent accidental discharge and battery drain.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

The Streamlight TLR-8 HL-X G sub USB is backed by a Atilẹyin ọja to lopin. This warranty covers defects in material and workmanship for the lifetime of the product, excluding batteries, bulbs, abuse, and normal wear and tear.

For warranty claims, technical support, or further assistance, please visit the official Streamlight webojula tabi kan si wọn onibara iṣẹ Eka. O tun le ṣàbẹwò awọn Ile itaja Streamlight lori Amazon fun ọja alaye ati oro.