Timex TW2Y01600JI

Timex Men's Dress Chronograph Watch

Model: TW2Y01600JI

Ọrọ Iṣaaju

Thank you for choosing a Timex watch. This manual provides essential information for the proper use and care of your Timex Men's Dress Chronograph 43mm Watch, model TW2Y01600JI. This watch features a quartz chronograph movement, a date display, and is designed for everyday wear with its water-resistant construction.

Ṣeto

1. Ṣiṣeto Akoko naa

  1. Pull the crown (B) out to the furthest position.
  2. Turn the crown (B) in either direction to set the hour and minute hands. Ensure the AM/PM is correctly set if your watch has a 24-hour indicator or if the date changes at midnight.
  3. Push the crown (B) back into its normal position to start the watch.

2. Ṣiṣeto Ọjọ

  1. Pull the crown (B) out to the middle position.
  2. Turn the crown (B) to set the date.
  3. Once the correct date is displayed, push the crown (B) back into its normal position.

3. Siṣàtúnṣe ẹgba

The stainless steel bracelet is designed for a secure fit. For optimal comfort, it may require adjustment to fit your wrist size. It is recommended to have a professional jeweler adjust the bracelet by adding or removing links. Refer to the sizing chart video for guidance on how different case sizes appear on various wrist sizes.

Apa view of the Timex Dress Chronograph Watch, showing the crown and two pushers.
olusin 1: Apa view of the watch, illustrating the crown (B) and chronograph pushers (A and C).
Video 1: Timex Sizing Chart. This video demonstrates how various watch case sizes appear on different wrist sizes, which can be helpful when considering bracelet adjustments.

Ṣiṣẹ Chronograph

Your watch is equipped with a chronograph function to measure elapsed time.

  1. Bẹrẹ: Press pusher (A) to start the chronograph. The chronograph second hand will begin to move.
  2. Duro: Press pusher (A) again to stop the chronograph. The elapsed time will be displayed.
  3. Tun: After stopping the chronograph, press pusher (C) to reset all chronograph hands to their zero positions.

Itoju

Ninu

To maintain the appearance of your watch, wipe the case and bracelet with a soft, damp Aṣọ. Yẹra fún lílo àwọn kẹ́míkà líle tàbí àwọn ohun èlò ìpalára, nítorí pé àwọn wọ̀nyí lè ba ìparí rẹ̀ jẹ́.

Omi Resistance

This watch is water resistant to 50 meters (WR50M). This means it is suitable for short periods of recreational swimming, but not for diving or snorkeling. Do not operate the crown or pushers while the watch is wet or submerged, as this can compromise the water resistance. Exposure to hot water (e.g., in showers or saunas) should be avoided as it can damage seals.

Close-up of the watch back, showing 'TIMEX', 'WR50 METERS', and 'SR920SW CELL'.
Figure 2: Watch case back, indicating water resistance (WR50 Meters) and battery type (SR920SW CELL).

Laasigbotitusita

  • Wo ko nṣiṣẹ: Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement. The watch uses a SR920SW CELL battery.
  • Akoko/ọjọ ti ko tọ: Refer to the 'Setting the Time' and 'Setting the Date' sections to re-adjust.
  • Awọn ọwọ Chronograph ko tunto si odo: This may indicate a need for chronograph hand calibration. Consult a professional watch repair service or the Timex support website for instructions specific to your movement.

Awọn pato

Nọmba awoṣeTW2Y01600JI
Case Opin43 mm
Ọran Sisanra11.5 mm
Iwọn Iwọn20 mm
Band Gigun8 inches
Iṣipopada IruKuotisi
Ifihan IruAnalog
Omi ResistanceMita 50 (WR50M)
Ohun elo ọranIrin ti ko njepata
Ohun elo BandIrin ti ko njepata
Ohun elo CrystalErupe Gilasi
Batiri IruSR920SW CELL

Atilẹyin ọja ati Support

Your Timex watch is covered by a limited warranty. For detailed warranty information, service, or support, please visit the official Timex webojula tabi kan si wọn onibara iṣẹ. Tọju iwe-ẹri rira rẹ bi ẹri rira.