M-Vave IR-Box Speaker Simulation Pedal User Manual

1. Ifihan

The M-Vave IR-Box is a compact and versatile speaker simulation pedal designed for guitarists and bassists. It integrates Impulse Response (IR) technology to provide authentic cabinet sounds, offering a wide range of tones for various musical styles. This manual provides essential information for setting up, operating, and maintaining your IR-Box pedal.

2. Key Awọn ẹya ara ẹrọ

• Simple and high-quality design.
• 32 built-in presets with Impulse Response (IR) technology.
• Includes 25 electric guitar cabinet simulations and 7 electric bass cabinet simulations.
• USB connectivity for computer-based modulation and customization.
• Ultra-low latency of less than 1.5 ms for immediate response.
• High-performance digital signal processing with 103 dB signal-to-noise ratio.
• 44.1 kHz 24-bit sampling rate for premium sound quality.
• Supports custom IR files pẹlu 1024 sample ojuami.
• Professional 9-segment equalizer module (via software/app) with a ±12 dB adjustment range (20 Hz to 18 kHz).
• Multiple output options: 1/4" TS unbalanced, XLR balanced, and 1/8" TRS stereo headphone.

3. Eto

3.1 Unpacking ati ayewo

Carefully unpack the M-Vave IR-Box and inspect it for any signs of damage. Ensure all included components are present.

3.2 Asopọ agbara

The IR-Box can be powered by a DC 9V power supply (minimum 300mA, not included) or via USB 5V (minimum 300mA) from a computer or USB power adapter. Connect the appropriate power source to the pedal.

3.3 Awọn isopọ Ohun

Connect your instrument (guitar or bass) to the IN jack using a 1/4" TS instrument cable. Connect the Jade jack si rẹ amplifier, mixer, or audio interface using a 1/4" TS cable. For balanced output, use an XLR cable from the XLR output. For silent practice, connect headphones to the 1/8" TRS headphone output.

Aworan 3.3.1: Oke-isalẹ view of the M-Vave IR-Box pedal, highlighting the input (IN), output (OUT), XLR port, and control knobs for LOW CUT, VOL, and HI CUT. The bypass button and display are also visible.

3.4 USB Asopọ

Connect the pedal to your computer using the supplied USB-C data cable. This connection allows for firmware updates, software control, IR file customization, and preset management.

4. Awọn ilana Iṣiṣẹ

4.1 Titan / Pa a

Once connected to a power source, the pedal will automatically power on. There is no dedicated power switch. Disconnect the power source to turn off the unit.

4.2 Àṣàyàn Àtilẹ̀wá

Lo awọn '+' ati '-' buttons to navigate through the 32 available presets. The current preset number will be displayed on the screen.

4.3 Bypass Function

Tẹ awọn BYPASS button to toggle the effect on or off. When bypassed, the signal passes through the pedal without IR processing.

4.4 Iṣakoso Knobs

• OGUN kekere: Adjusts the low-frequency cutoff point. Turn clockwise to remove more low-end frequencies.
• VOL: Ó ń ṣàkóso gbogbo ìwọ̀n ìjáde ti pedal.
• HI CUT: Adjusts the high-frequency cutoff point. Turn clockwise to remove more high-end frequencies.

Aworan 4.4.1: Angled view of the M-Vave IR-Box pedal, clearly showing the LOW CUT, VOL, and HI CUT knobs, along with the display and bypass/preset buttons.

5. Modulation and Customization

The M-Vave IR-Box offers extensive customization options via its official software and mobile application. Connect the pedal to your computer via USB to access these features.

5.1 IR Module Customization

Within the software, you can customize IR files. The IR module supports 44.1 kHz 24-bit sampling rate and IR files pẹlu 1024 sample points. This allows you to load your own impulse responses to further tailor your sound.

5.2 EQ Module

The official software and mobile app include a professional 9-segment equalizer module. This EQ allows you to fine-tune frequency ranges from 20 Hz to 18 kHz with a ±12 dB adjustment range, providing precise tonal control.

• Ipo aiyipada: The IR module is active, and the EQ module is deactivated.
• Activating EQ: The EQ module can be manually activated via the software/app.
• Independent EQ: If the IR module is deactivated, the EQ module can be used independently.

5.3 Iṣakoso tito tẹlẹ

The software allows for one-click import and export of presets, simplifying the process of sharing and backing up your customized settings.

6. Itọju

• Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ìta pedal náà. Yẹra fún àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
• Ibi ipamọ: Store the pedal in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
• Mimu: Avoid dropping the pedal or subjecting it to strong impacts, which could damage internal components.

7. Laasigbotitusita

• Ko si Ohun:
  • Ensure the power supply is correctly connected and providing sufficient power.
  • Ṣàyẹ̀wò gbogbo àwọn okùn ohùn fún ìsopọ̀ tó yẹ àti iṣẹ́ tó yẹ.
  • Verify that the pedal is not in bypass mode if you expect an effect.
  • Confirm that the volume knob (VOL) is not set to minimum.
• Dídára Ohùn/Ariwo Tí Kò Dára:
  • Ensure you are using a regulated power supply.
  • Ṣàyẹ̀wò fún àwọn okùn tàbí àwọn ìsopọ̀ tí kò ní àbùkù.
  • Adjust the LOW CUT and HI CUT knobs to shape the frequency response and reduce unwanted frequencies.
  • If using custom IRs, ensure they are correctly formatted and loaded.
• Pedal Not Responding to USB:
  • Ensure the USB-C cable is securely connected to both the pedal and the computer.
  • Gbiyanju ibudo USB ti o yatọ lori kọnputa rẹ.
  • Restart your computer and the pedal.
  • Ensure you have the latest official software and drivers installed.

8. Awọn pato

9. Ohun ti o wa ninu Apoti

• M-Vave IR-Box Pedal
• USB-C Data Cable

10. Atilẹyin ọja ati Support

The M-Vave IR-Box comes with a Atilẹyin ọja iṣelọpọ ọdun 2. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or visit the official M-Vave webaaye fun alaye siwaju.