Alaye Aabo pataki
Read all instructions carefully before using the appliance. Retain this manual for future reference.
- Always disconnect the vacuum cleaner from the power supply before cleaning or performing maintenance.
- Ma ṣe gbe awọn ohun elo ina tabi awọn ohun elo ijona, ẽru gbigbona, tabi ohun nla, awọn ohun mimu.
- Do not immerse the motor head in water or other liquids.
- Rí i dájú pé gbogbo àwọn àlẹ̀mọ́ ni a fi sori ẹrọ dáadáa kí a tó ṣiṣẹ́.
- Ohun elo yii jẹ fun lilo ile nikan.
Package Awọn akoonu
Daju pe gbogbo awọn nkan wa ninu apoti:
- 1x Hoover Wet & Dry vacuum cleaner
- 1x Flexi hose and tube attachment
- 1x 2-in-1 Crevice tool
- 1x Fẹlẹ pakà
- 1x Ilana itọnisọna
All components included with the Hoover HWD21 Wet Dry Drum Vacuum.
Apejọ ati Oṣo
- Ṣii silẹ: Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
- Attaching Castor Wheels: Invert the tank and firmly push the castor wheels into their designated slots on the base. Ensure they click into place.
Ensure castor wheels are securely attached for mobility.
- Sisopọ okun: Insert the flexible hose into the suction inlet on the front of the vacuum cleaner until it is secure. For the blower function, connect the hose to the exhaust outlet.
- Attaching Extension Tubes and Nozzles: Connect the desired extension tubes to the hose, then attach the appropriate nozzle (e.g., floor brush, crevice tool) for your cleaning task.
Awọn ilana Iṣiṣẹ
Titan / Pipa agbara
Plug the power cord into a suitable electrical outlet. Press the green "ON" button to start the vacuum and the red "OFF" button to stop it.
Location of the power ON (green) and OFF (red) buttons.
Igbale gbigbẹ
For dry vacuuming, ensure the dry filter is correctly installed inside the tank. Attach the floor brush or crevice tool as needed. Move the nozzle over the dry debris to collect it.
The floor brush attachment effectively cleans dry debris from hard surfaces.
Igbale Tutu
For wet vacuuming, remove the dry filter. Attach the appropriate wet nozzle (if different from dry, or use the floor brush without the brush insert). Carefully vacuum liquid spills. Do not overfill the tank; the float mechanism will stop suction when full.
The vacuum efficiently handles liquid spills on various surfaces.
Išė fifun
To use the blower function, detach the hose from the suction inlet and connect it to the exhaust outlet located on the motor head. Turn on the vacuum to use it as a blower for clearing debris from pathways or hard-to-reach areas.
The blower function helps clear debris from surfaces.
Lilo Awọn asomọ
- Multi-surface Floor Nozzle: Ideal for general cleaning on both hard floors and carpets.
- 2-in-1 Irinṣẹ Crevice: Use the narrow end for tight spaces and corners. Slide the brush attachment forward for dusting delicate surfaces or upholstery.
The crevice tool with brush is suitable for cleaning upholstery and tight areas.
Itoju
Ṣofo awọn Tanki
After each use, especially after wet vacuuming, unplug the unit and unclip the motor head. Carefully lift the motor head and dispose of the collected debris or liquid. Clean the inside of the tank with water and mild detergent if necessary, then dry thoroughly.
Ninu Ajọ
- Ajọ gbigbe: For dry vacuuming, regularly check and clean the dry filter. Tap it gently to remove dust or rinse with water if heavily soiled. Ensure it is completely dry before re-installing.
- Foam Filter (for wet use): If a foam filter is used for wet vacuuming, rinse it with water and allow it to air dry completely before storage or next use.
Gbogbogbo Cleaning ati Ibi ipamọ
Pa ode ti ẹrọ igbale kuro pẹlu ipolowoamp cloth. Do not use abrasive cleaners. Store the vacuum and its accessories in a dry place, away from direct sunlight and extreme temperatures. Utilize the onboard accessory storage for convenience.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Igbale ko ni tan. | No power supply; power cord not plugged in; power button not pressed. | Check power outlet; ensure cord is securely plugged in; press the green "ON" button. |
| Isonu ti afamora. | Hose or nozzle blocked; tank full; filter clogged; hose not securely attached. | Check and clear blockages; empty the tank; clean or replace filter; ensure hose is firmly connected. |
| Omi jijo nigba tutu igbale. | Tank overfilled; seals not properly seated. | Empty the tank; check and re-seat the motor head and any seals. |
| Ariwo dani nigbati isẹ. | Blockage in hose or nozzle; motor issue. | Ṣàyẹ̀wò kí o sì mú àwọn ìdènà kúrò. Tí ariwo bá ń bá a lọ, kan si olùrànlọ́wọ́ oníbàárà. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Hoover |
| Nọmba awoṣe | HWD21 |
| Orisun agbara | Okun Itanna |
| Agbara mọto | 1200W |
| Agbara ojò | 20 liters |
| Ohun elo ojò | Irin ti ko njepata |
| Okun Gigun | 5m |
| Dada iṣeduro | Gbogbo awọn ilẹ ipakà |
| Àwọ̀ | Dudu ati fadaka |
| Awọn irinše to wa | Vacuum cleaner, Flexi hose, Extension tube, 2-in-1 Crevice tool, Floor brush, Instruction manual |
Atilẹyin ọja ati Support
This Hoover HWD21 Stainless Steel 20L Wet Dry Drum Vacuum comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, spare parts, or warranty claims, please contact Hoover customer service through their official webaaye tabi alaye olubasọrọ ti a pese ninu iwe atilẹyin ọja rẹ.
Jọwọ ṣe idaduro ẹri rira rẹ fun awọn idi atilẹyin ọja.