SRNE SL2410 PWM Solar Charge Controller User Manual

1. Ifihan

This manual provides essential information for the safe and efficient operation of your SRNE SL2410 PWM Solar Charge Controller. The SL2410 is a 12V/24V auto-sensing, 10A Pulse Width Modulation (PWM) solar charge controller designed for various solar power systems, including street lights and monitoring devices. It features an IP67 waterproof rating and an aluminum shell for enhanced durability.

Awọn ẹya pataki:

• 12V/24V system voltage auto-detection.
• LED numeric display and waterproof keys for easy operation.
• To ti ni ilọsiwaju 3-stage PWM charging algorithm for battery health.
• Support for multiple battery types: sealed, GEL, flooded lead-acid, ternary-material lithium, and lithium iron phosphate.
• Five load working modes for diverse applications.
• External temperature sensor for precise temperature compensation.
• Power-down saving function for parameter retention.
• Comprehensive protections: overcharge, over-discharge, overload, short-circuit, reverse-connection, and TVS lighting protection.

olusin 1: Iwaju view of the SRNE SL2410 PWM Solar Charge Controller, showing the display, keys, and cable connections.

2. Alaye Aabo

Please read all instructions carefully before installation and operation to prevent damage to the controller, battery, or other components.

• Ensure all wiring is correct and connections are secure before applying power. Incorrect wiring can cause damage.
• Nigbagbogbo so batiri pọ ni akọkọ, lẹhinna nronu oorun, ati nikẹhin fifuye naa. Ge asopọ ni ọna yiyipada.
• Do not attempt to disassemble or repair the controller. Contact qualified personnel for service.
• Fi olùdarí náà sí ibi tí afẹ́fẹ́ lè máa tàn kálẹ̀ dáadáa, jìnnà sí àwọn ohun èlò tí ó lè jóná.
• Although the controller has an IP67 waterproof rating, avoid submerging it in water or exposing it to extreme conditions beyond its operating temperature range.
• Rii daju pe eto voltage (12V or 24V) matches the controller's auto-detection capability and your battery bank.
• Use appropriate circuit breakers or fuses for the solar panel, battery, and load circuits.

3. Ọja Ipariview ati irinše

The SRNE SL2410 controller features a compact design with clearly labeled connection points and indicators.

Figure 2: Diagram showing the main components and indicators of the SRNE SL2410 controller.

Idanimọ eroja:

• Atọka idiyele: Displays the status of solar charging.
• Atọka Batiri: Shows the battery's charge level and status.
• Atọka fifuye: Indicates the status of the connected load.
• Bọtini: Used for navigating menus and confirming selections.
• Ipo: Used for changing operating modes and settings.
• Connection Leads: Pre-wired cables for solar panel, battery, and load connections.
• Sensọ iwọn otutu: External sensor for accurate battery temperature compensation.

4. Eto ati fifi sori

Proper installation is crucial for the controller's performance and longevity.

4.1 Wiring aworan atọka

Follow the wiring sequence carefully to avoid damage.

Figure 3: Wiring diagram illustrating connections for the solar panel, battery, and load.

Awọn Igbesẹ Wiwa:

1. So batiri pọ: Connect the battery's positive and negative terminals to the corresponding battery connection leads on the controller. Ensure correct polarity. The controller will automatically detect the system voltage (12V tabi 24V).
2. Solar Panel: Connect the solar panel's positive and negative terminals to the corresponding solar panel connection leads on the controller. Ensure correct polarity.
3. So fifuye naa pọ: Connect the load's positive and negative terminals to the corresponding load connection leads on the controller. Ensure correct polarity.

Pataki: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load, then solar panel, then battery.

4.2 Iṣagbesori

The controller should be mounted in a location that allows for adequate air circulation. Refer to the dimensions below for installation planning.

Figure 4: Installation dimensions for the SRNE SL2410 controller (dimensions in mm).

Awọn iwọn Alakoso: 82mm (length) x 58mm (width) x 20mm (height).

5. Awọn ilana Iṣiṣẹ

The SRNE SL2410 controller is designed for user-friendly operation with its LED display and waterproof keys.

5.1 LED Ipo itọkasi

The controller provides visual feedback through its LED indicators:

5.2 Eto Eto

The controller allows for various parameter settings using the 'Mode' and 'Key' buttons. The power-down saving function ensures that your settings are retained even after power loss.

• Aṣayan Iru Batiri: The controller supports sealed, GEL, flooded lead-acid, ternary-material lithium, and lithium iron phosphate batteries. Refer to the controller's display and manual for specific steps to select the correct battery type.
• Load Working Modes: Up to 5 load working modes are available, facilitating application to different types of road lamps and monitoring devices. Consult the detailed product documentation for instructions on configuring these modes.
• Biinu iwọn otutu: The external temperature sensor ensures accurate charging voltage adjustments based on ambient temperature, optimizing battery life.

6. Itọju

The SRNE SL2410 is designed for low maintenance due to its robust IP67 rating and aluminum casing. However, periodic checks are recommended:

• Ṣayẹwo awọn isopọ: Periodically check all wiring connections for tightness and corrosion. Loose connections can cause voltage silė ati overheating.
• Nu Adarí: While waterproof, ensure the controller's surface is clean from dust and debris to maintain optimal heat dissipation. Use a soft, dry cloth.
• Atẹle Iṣe: Observe the LED indicators regularly to ensure the system is operating normally.

7. Laasigbotitusita

This section provides guidance for common issues. Refer to the LED Status Indication table in Section 5.1 for diagnostic help.

• Ko si Agbara/Ifihan Pipa: Check battery connections. Ensure the battery is charged above the controller's minimum operating voltage.
• No Charging (Charging LED off): Verify solar panel connections and ensure there is sufficient sunlight. Check for system over voltage (quick flashing Charging LED).
• Load Not Working (Load LED off): Check load connections. Ensure the battery is not under voltage (slow flashing Battery LED) or over-discharged (quick flashing Battery LED). Check for overload protection (slow flashing Load LED) or short-circuit protection (quick flashing Load LED).
• Battery Not Connected (Battery LED steady off): Recheck battery wiring and ensure secure connections.
• System Over Voltage (Charging LED quick flashing): Ensure the solar panel's open-circuit voltage ko kọja iwọn didun titẹ sii ti oludari julọtage.

If issues persist, consult the manufacturer or a qualified technician.

8. Awọn pato

Technical parameters for the SRNE SL2410 PWM Solar Charge Controller:

9. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.