1. Ifihan
This manual provides detailed instructions for the installation, operation, and maintenance of your KOUENOM P12 4K Rear View Mirror Camera. This device integrates a high-resolution dash camera with smart features like CarPlay and Android Auto, designed to enhance your driving experience and safety.
Awọn ẹya pataki pẹlu:
- Gbigbasilẹ Kamẹra Meji: Front 4K (3840×2160)@25fps and Rear 1080P (1920×1080)@25fps.
- Gbooro-Igun View: 170° front and 140° rear to minimize blind spots.
- Idarapọ Smart: Wireless CarPlay and Android Auto for navigation, calls, messages, and music.
- 12-inch IPS Fọwọkan iboju: 1920x480P display with 2.5D curved glass for clear visuals and sensitive control.
- Multiple Audio Output Modes: FM transmitter, AUX audio cable, Bluetooth, and built-in speaker.
- Awọn ẹya Aabo Imudara: Loop recording, G-sensor, and reverse assistance.
- Included Storage: Pre-installed 64GB memory card.
2. Ohun ti o wa ninu Apoti
Jọwọ rii daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:
- 1x KOUENOM P12 4K Mirror Dash Cam
- 1x Waterproof 1080p Rear Camera
- 1x 64GB Micro SD Card (pre-installed)
- 1x Okun Ngba agbara ọkọ ayọkẹlẹ
- 1x Rear Camera Cable (18ft/550cm)
- 1x AUX Cable (4.7ft/145cm)
- 1x Ọpa fifi sori ẹrọ
- 1x Itọsọna olumulo
- Àwọn okùn/Àwọn ohun èlò ìfisẹ́pọ̀
3. Ọja Ipariview
The KOUENOM P12 is designed to seamlessly integrate into your vehicle, replacing your existing rearview mirror. It features a sleek design with intuitive controls.
3.1. Device Ìfilélẹ
3.2. Àwọn Èbúté àti Àwọn Ìṣàkóso
- Iru-C Ibudo Agbara: Fun sisopọ ṣaja ọkọ ayọkẹlẹ.
- Rear Camera Port: For connecting the rear camera cable.
- Micro SD Kaadi Iho: Supports up to 256GB (64GB card included).
- Ibudo AUX: For connecting to your car's audio system via AUX cable.
- Bọtini agbara: Located on the bottom for manual power control.
- Bọtini atunto: Bọtini iho kekere fun atunto ile-iṣẹ.
4. Eto ati fifi sori
Follow these steps to properly install your KOUENOM P12 mirror dash cam.
4.1. Iṣagbesori digi Dash Cam
- So kamẹra daaṣi digi naa mọ ẹhin rẹ ti o wa tẹlẹview mirror using the provided elastic straps. Ensure it is firmly attached and does not obstruct your view.
- Ṣatunṣe lẹnsi kamẹra iwaju lati gba ohun ti o fẹ view ti opopona wa niwaju.
4.2. Síso okùn agbára pọ̀
- Connect the car charging cable to the Type-C power port on the top of the mirror dash cam.
- So ìkángun kejì ti ẹ̀rọ amúlétutù ọkọ̀ náà mọ́ ibi tí agbára 12V ti ọkọ̀ rẹ wà (ìhò tí ó ń tàn sígá).
- Route the power cable neatly along the headliner and A-pillar to conceal it and prevent interference with driving. Use the provided installation tool to tuck the cable.
4.3. Fifi Kamẹra Rear sori ẹrọ
The rear camera is designed for external mounting, typically above the license plate. It is waterproof.
- Choose a suitable location for the rear camera, ensuring a clear view ti ẹhin ọkọ rẹ.
- Mount the rear camera securely using the provided screws or adhesive.
- Connect the rear camera cable to the rear camera.
- Route the rear camera cable from the rear of the vehicle to the mirror dash cam. This typically involves running the cable along the vehicle's interior trim, under the carpet, and up to the front.
- Connect the rear camera cable to the dedicated port on the mirror dash cam.
- Pataki: For reverse assistance functionality, connect the red wire from the rear camera cable to the positive lead of your vehicle's reversing light. This will automatically display the rear camera view pẹlu awọn itọsọna ibi ipamọ ọkọ ayọkẹlẹ nigbati o ba yipada si ẹhin.
5. Awọn ilana Iṣiṣẹ
5.1. Agbara Tan / Paa
- The device will automatically power on and begin recording when your vehicle starts.
- To manually power on/off, press and hold the power button located on the bottom of the unit.
5.2. Lilọ kiri Iboju Ifọwọkan
The 12-inch IPS touch screen provides intuitive control:
- Ra osi/Ọtun: Yipada laarin kamẹra iwaju view, ru kamẹra view, tabi ifihan iboju pipin.
- Swipe Up/Down (on camera view): Ṣatunṣe inaro viewing igun ti awọn ti o yan kamẹra.
- Fọwọ ba: Select icons or confirm actions.
5.3. CarPlay ati Android Auto
Connect your smartphone wirelessly for seamless integration:
- On the dash cam's main screen, tap the 'CarPlay' or 'Android Auto' icon.
- Rii daju pe Bluetooth ti ṣiṣẹ lori foonuiyara rẹ. Wa fun the device name (e.g., 'T86PRO-2987') and connect.
- For CarPlay, ensure Wi-Fi is also enabled on your iPhone and connect to the device's Wi-Fi network.
- Tẹle eyikeyi awọn ilana loju iboju lati pari asopọ naa.
- Once connected, you can access navigation, make calls, send messages, and stream music directly from the dash cam screen.
5.4. Iṣakoso ohun
Utilize voice commands for safer driving:
- Activate Siri or Google Assistant through the connected CarPlay/Android Auto interface.
- Use commands like "Hey Siri, call [Contact Name]" or "Hey Google, navigate to [Destination]" to control your phone hands-free.
5.5. Audio Output Modes
Select your preferred audio output method:
- Atagba FM: Tune your car radio to an unused FM frequency and set the dash cam to the same frequency to transmit audio.
- AUX Audio Cable: Connect the provided AUX cable from the dash cam's AUX port to your car's AUX input.
- Bluetooth: If your car stereo supports Bluetooth, connect the dash cam to it via Bluetooth for audio output.
- Agbọrọsọ ti a ṣe sinu: The dash cam has its own speaker for audio playback.
5.6. Àwọn Ẹ̀yà Ìgbàsílẹ̀
- Gbigbasilẹ Loop: The camera continuously records, automatically overwriting the oldest unlocked files when the memory card is full. Recording segments can typically be set to 1, 3, or 5 minutes.
- G-Sensọ: Detects sudden impacts or collisions. When triggered, it automatically locks the current video segment to prevent it from being overwritten, preserving critical evidence.
- Atẹle Ibugbe 24H: Provides continuous surveillance when your vehicle is parked. (Note: This feature may require a hardwire kit, not included, for continuous power.)
- Reverse Assistance: When the red wire of the rear camera is connected to the reversing light, the screen will automatically display the rear view with adjustable parking guidelines when the vehicle is in reverse.
5.7. Ifihan Eto
- Atunse Imọlẹ: Adjust screen brightness manually or set it to 'Preset Model' for automatic adjustment based on time of day.
- Iboju kọmputa: Configure the screen saver to activate after 10 seconds, 30 seconds, 1 minute, or turn it off. The screen will black out but continue recording.
6. Itọju
- Fifọ lẹnsi naa: Regularly clean the front and rear camera lenses with a soft, lint-free cloth to ensure clear recording quality.
- Ninu iboju: Use a soft, dry cloth to wipe the touch screen. Avoid abrasive materials or harsh chemicals.
- Isakoso Kaadi Iranti: Periodically format the SD card (at least once a month) to maintain optimal performance and prevent data corruption. Back up any important footage ṣaaju ki o to kika.
- Awọn imudojuiwọn famuwia: Ṣayẹwo awọn olupese ká webaaye fun eyikeyi awọn imudojuiwọn famuwia ti o wa lati rii daju pe ẹrọ rẹ ni awọn ẹya tuntun ati awọn atunṣe kokoro.
7. Laasigbotitusita
If you encounter issues with your KOUENOM P12, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ naa ko ṣiṣẹ. | No power supply; faulty cable; loose connection. | Check car charger connection. Ensure vehicle's 12V outlet is functional. Try a different power source if available. |
| Iboju ko dahun tabi tio tutunini. | Àṣìṣe sọ́fítíwètì; àṣìṣe ìgbà díẹ̀. | Press the reset button with a thin object (e.g., paperclip). Restart the device. |
| Recording quality is poor/blurry. | Dirty lens; protective film still on; incorrect resolution settings. | Clean camera lenses. Remove any protective film. Check video resolution settings in the menu. |
| CarPlay/Android Auto kò sopọ̀ mọ́ ara wọn. | Bluetooth/Wi-Fi off; incorrect pairing; phone compatibility. | Ensure Bluetooth and Wi-Fi are enabled on your phone. Re-pair the device. Check phone compatibility with CarPlay/Android Auto. |
| Rear camera image is not displayed or is incorrect. | Loose cable connection; red wire not connected to reverse light. | Check all rear camera cable connections. Ensure the red wire is correctly connected to the reversing light for automatic display. |
| Aṣiṣe kaadi iranti. | Card full; corrupted card; incompatible card. | Format the SD card. Try a different compatible SD card if the issue persists. |
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Ọja Mefa | 0.71 x 11.85 x 2.83 inches |
| Iwọn Nkan | 2.09 iwon |
| Nọmba awoṣe | P12 |
| Brand | KOUENOM |
| Orukọ awoṣe | KOUENOM P12 4K front & rear mirror camera |
| Ọkọ Iṣẹ Iru | Ọkọ ayọkẹlẹ |
| Asopọmọra Technology | Bluetooth, USB, Wi-Fi |
| Pataki Awọn ẹya ara ẹrọ | Built-In Display, Built-In Speaker, CarPlay, Android Auto wireless connection, Loop record, Reverse assistant, G-sensor, Touch Screen, Voice Control |
| Ipinnu Yaworan fidio | Front 4K (3840x2160), Rear 1080p (1920x1080) |
| Iṣagbesori Iru | Ẹyìnview Digi òke |
| Àwọ̀ | Dudu |
| Ọna Iṣakoso | Fọwọkan |
9. Atilẹyin ọja ati Support
Your KOUENOM P12 Rear View Mirror Camera comes with a 12-osu atilẹyin ọja, ensuring stable performance. KOUENOM provides dedicated customer service to assist with any questions or issues you may encounter.
For support, please refer to the contact information provided in your product packaging or visit the official KOUENOM webojula.