Ilana itọnisọna

1. Ọja Ipariview

This product is a replacement electric control dust box and water tank assembly designed for the ROIDMI EVE Plus robot vacuum cleaner. It integrates both dust collection and water storage functionalities, crucial for the vacuum's cleaning and mopping operations. The design focuses on enhanced filtration, reduced operational noise, and extended product lifespan through durable materials and an optimized water circulation system.

Ibamu: This accessory is specifically designed for and compatible with the ROIDMI EVE Plus Robot Vacuum Cleaner.

olusin 1: Top view of the KNVZNWFF Hei man ba electric control dust box and water tank assembly.

2. Itọsọna fifi sori ẹrọ

Follow these steps to properly install or replace the electric control dust box and water tank in your ROIDMI EVE Plus robot vacuum cleaner.

1. Agbara Pa: Ensure your ROIDMI EVE Plus robot vacuum cleaner is powered off and disconnected from its charging dock before beginning installation.
2. Yọ Ẹka Atijọ kuro: Locate the existing dust box and water tank assembly on your robot vacuum. Typically, there is a release button or latch to remove it. Gently press the release mechanism and slide out the old component.
3. Mura Ẹya Tuntun: If applicable, open the lid of the new dust box/water tank (as shown in Figure 2) to inspect the filter and ensure it is properly seated.
4. Fi Ẹka Tuntun sii: Align the new electric control dust box and water tank with the slot in the robot vacuum cleaner. Slide it in firmly until you hear a click, indicating it is securely locked in place.
5. Jẹrisi fifi sori ẹrọ: Gently tug on the installed component to ensure it is stable and does not easily come loose.

Figure 2: The dust box and water tank with the lid open, showing the filter compartment.

3. Isẹ

Once installed, the electric control dust box and water tank will function automatically with your ROIDMI EVE Plus robot vacuum cleaner. This integrated unit manages both dry debris collection and water distribution for mopping. The optimized design ensures efficient filtration of fine dust particles, preventing leakage, and contributes to a quieter operation by reducing resonance from aging parts.

The water circulation system is designed for environmental friendliness and water-saving, ensuring effective cleaning with minimal waste.

olusin 3: Oke ati isalẹ views of the dust box and water tank, illustrating its integrated design.

4. Itọju ati Itọju

Regular maintenance of the dust box and water tank is essential to ensure optimal performance and extend the lifespan of your robot vacuum cleaner.

• Emptying the Dust Box: After each cleaning cycle, or as needed, remove the dust box and empty its contents into a waste bin.
• Ninu Ajọ naa: The filter inside the dust box should be cleaned regularly. Tap it gently to remove dust or use a small brush. For thorough cleaning, the filter can be rinsed with water.
• Drying After Washing: If you wash the dust box or filter with water, ensure it is patapata gbẹ before reinserting it into the vacuum cleaner. This prevents mold growth and damage to the electronic components.
• Ninu Omi Omi: Periodically rinse the water tank to prevent residue buildup. Use clean water only.
• Ayewo: Regularly inspect the seals and connections for any signs of wear or damage. Replace the component if significant wear is observed to maintain filtration efficiency and prevent leaks.

5. Laasigbotitusita

If you encounter issues with your electric control dust box and water tank, consider the following:

• Reduced Suction/Filtration: Check if the dust box is full or if the filter is clogged. Clean or replace the filter as necessary. Ensure the dust box is properly sealed.
• Sisun omi: Verify that the water tank is correctly installed and securely latched. Inspect the seals for any damage or misalignment.
• Ariwo ti o pọ si: Ensure the component is installed correctly and all parts are securely fitted. Excessive noise might indicate an issue with the vacuum cleaner itself rather than the accessory.
• Ko si Gbigbe omi: Check if the water tank is filled and properly installed. Ensure there are no blockages in the water outlets.

6. Awọn alaye ọja

7. Atilẹyin ọja ati Support

Fún ìwífún nípa àtìlẹ́yìn tàbí ìrànlọ́wọ́ ìmọ̀ ẹ̀rọ, jọ̀wọ́ wo ìwé àkọsílẹ̀ ríra àtilẹ̀wá tàbí kí o kàn sí olùtajà náà tààrà. Pa ẹ̀rí ríra rẹ mọ́ fún èyíkéyìí ẹ̀tọ́ àtìlẹ́yìn.