1. Ifihan
Thank you for choosing the AQQA Aquarium LED Light. This high-quality lighting system is designed to provide optimal illumination for your aquatic environment, supporting the healthy growth of fish and plants. It features advanced LED technology, a convenient timer, and multiple lighting modes to create a vibrant and thriving aquarium.
2. Awọn ilana aabo
- Always unplug the light from the power outlet before performing any maintenance, cleaning, or installation.
- Do not immerse the power adapter or controller in water. The light unit itself is IP67 waterproof, but the power components are not.
- Rii daju pe ina ti wa ni aabo lori aquarium lati yago fun isubu lairotẹlẹ.
- Do not operate the light if the power cord or plug is damaged.
- Jeki kuro ni arọwọto awọn ọmọde.
- Ọja yii wa fun lilo inu ile nikan.
3. Package Awọn akoonu
Jọwọ ṣayẹwo pe gbogbo awọn nkan wa ati ni ipo to dara:
- AQQA Aquarium LED Light Unit
- Extendable Mounting Brackets (2 pcs)
- Inline Controller with Power Cord
- Ìwé Ìtọ́sọ́nà fún Àwọn Ará Japan
4. Awọn ẹya Ọja
- Awọn eerun LED Didara to gaju: Features 5 rows of high-brightness LED chips, providing approximately 10% more chips than comparable lights for brighter, more uniform illumination. Full-spectrum design (white + RGB) supports healthy fish and aquatic plant growth.
- Timer Function & Memory: Built-in timer with 5, 10, or 12-hour settings for automatic daily on/off cycles. A memory function restores previous settings after a power outage.
- 3 Lighting Modes & 10-Level Brightness: Offers Full Spectrum, White Light, and Color Light modes. Each mode has 10 adjustable brightness levels (3% to 100%) for precise environmental control.
- Extendable Stand & IP67 Waterproof: Adjustable stand design fits various aquarium widths. IP67 waterproof rating protects against water vapor and allows for temporary submersion (retrieve and dry within 30 minutes if submerged).
- Lightweight & Eye-Friendly: Lightweight design minimizes stress on aquarium edges. Flicker-free illumination is gentle on the eyes during observation.
5. Awọn ilana iṣeto
- So Awọn Biraketi Iṣagbesori: Slide the extendable mounting brackets into the slots on both ends of the LED light unit. Adjust the brackets to match the width of your aquarium.
- Gbe Imọlẹ naa si: Carefully place the light unit with attached brackets onto the edges of your aquarium. Ensure it is stable and centered over the tank.
- So agbara: Plug the inline controller's power cord into a suitable power outlet.
6. Awọn ilana Iṣiṣẹ
The AQQA Aquarium LED Light is controlled via an inline remote. Familiarize yourself with the buttons:
- Aago: Ṣeto iye akoko iṣẹ (5H, 10H, 12H).
- RGB +/-: Adjusts the brightness of the RGB (color) LEDs.
- ON/OFF / M: Powers the light on/off and cycles through lighting modes.
- W +/-: Adjusts the brightness of the white LEDs.
6.1 Agbara Tan / Pa ati Aṣayan Ipo
- Tẹ awọn ON/OFF / M button once to turn the light on.
- Tẹ awọn ON/OFF / M button repeatedly to cycle through the three lighting modes: Full Spectrum, Color Light, and White Light.
- Tẹ mọlẹ ON/OFF / M button for 3 seconds to turn the light off.
6.2 Atunṣe Imọlẹ
Each lighting mode offers 10 levels of brightness adjustment:
- To adjust the brightness of the white LEDs, use the W + (ilosoke) ati W - (decrease) buttons.
- To adjust the brightness of the RGB (color) LEDs, use the RGB + (ilosoke) ati RGB - (decrease) buttons.
6.3 Aago Išė
The timer function allows for automatic daily operation:
- Tẹ awọn Aago button to select the desired operating duration: 5 hours, 10 hours, or 12 hours.
- Once a timer is set, the light will automatically turn off after the selected duration and will turn on again at the same time the next day, repeating the cycle.
- The light retains its last brightness and color settings even after a power outage, thanks to its memory function.
6.4 Video Itọsọna iṣẹ
Watch this video for a visual guide on setting up and operating your AQQA Aquarium LED Light:
7. Itọju
- Fifọ Imọlẹ naa: Regularly wipe the light unit with a soft, damp cloth to remove dust and water spots. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners.
- Ṣiṣayẹwo awọn isopọ: Periodically inspect the power cord and connections for any signs of damage or wear.
- Ibọmi omi: If the light unit accidentally falls into the water, retrieve it immediately and dry it thoroughly before reconnecting power. The IP67 rating provides temporary protection, but prolonged submersion should be avoided.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | Ko si ipese agbara. | Check if the power adapter is securely plugged into the outlet and the light. |
| Imọlẹ jẹ baibai tabi flickers. | Eto imọlẹ ti ko tọ. | Adjust brightness using the W +/- or RGB +/- buttons. |
| Iṣẹ aago ko ṣiṣẹ. | Aago ko ṣeto daradara. | Ensure the TIMER button has been pressed to select a duration (5H, 10H, or 12H). |
| Light falls into water. | Iṣagbesori ti ko tọ. | Immediately unplug, retrieve, and dry the unit. Re-mount securely. |
9. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Awoṣe | AQ109-14W |
| Agbara | 14W |
| Iwọn otutu awọ | 6500K |
| Lumen | 534 |
| Nọmba ti LED | 39 |
| Imọlẹ Orisun Orisun | RGB+LED |
| Ohun elo | Acrylonitrile Butadiene Styrene (ABS) |
| Voltage | 100 Volts |
| Mabomire Rating | IP67 |
| Igba aye | Isunmọ. wakati meji 50,000 |
| Awọn iwọn Ẹyọ (L x W x H) | 25 x 10.2 x 1.6 cm |
| Ibamu Akueriomu Iwon | 30-45 cm |
10. Atilẹyin ọja ati Support
This AQQA Aquarium LED Light comes with a 1-odun didara atilẹyin ọja from the date of purchase. If you encounter any quality-related issues during this period, please do not hesitate to contact our customer support team. We are committed to responding within 24 hours and providing prompt assistance.
For support, please refer to the contact information provided with your purchase or visit the official AQQA store on Amazon.