VTOMAN V10 3500A & V3 Pro 2000A Jump Starter Instruction Manual

1. Ifihan

This manual provides essential instructions for the safe and effective operation and maintenance of your VTOMAN V10 3500A and V3 Pro 2000A Portable Car Jump Starters. Please read all instructions carefully before use.

Awọn iṣọra Aabo

• Nigbagbogbo so awọn pupa clamp si ebute rere (+) ati dudu clamp si ebute odi (-).
• Maṣe fi ọwọ kan awọn pupa ati dudu clamps together to avoid short-circuiting.
• Do not attempt to jump start a frozen or damaged battery.
• Ensure the jump starter is fully charged before use for optimal performance.
• Jeki kuro ni arọwọto awọn ọmọde.

2. Package Awọn akoonu

The VTOMAN Jump Starter package typically includes:

• VTOMAN V10 3500A Jump Starter Unit
• VTOMAN V3 Pro 2000A Jump Starter Unit
• Smart Jumper Cables with clamps (pupa fun rere, dudu fun odi)
• USB-C Ngba agbara Cable
• Itọsọna olumulo
• Ọran ipamọ

3. Ọja Ipariview

The VTOMAN Jump Starters are versatile devices designed for emergency vehicle starting and portable power. Key features include:

• Ti o ga julọ lọwọlọwọ: V10 Pro at 3500A, V3 Pro at 2000A.
• Ibamu fun Ẹ̀rọ Gbogbo-gbò: V10 Pro for up to 9.5L gas and 7.5L diesel engines. V3 Pro for up to 6L gas and 4L diesel engines.
• Multi-functional Ports: USB-C (PD15W), Dual USB-A (Quick Charging), and 15V/10A DC outputs for charging various devices.
• Filaṣi LED ti a ṣepọ: With multiple modes (flashlight, strobe, SOS).
• Awọn Aabo Aabo: AI Software, Reverse-Polarity, Over-Charge, Over-Voltage, Short-Circuit, High/Low-Temp, Over-Current, Over-Load, Spark-Proof, Reverse-Charge Protection.

Image: VTOMAN V10 and V3 Pro Jump Starters with their respective smart jumper cables and carrying cases.

4. Gbigba agbara fun olubere fifa soke

Before first use, fully charge your VTOMAN Jump Starter. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not used.

Awọn igbesẹ gbigba agbara:

1. Locate the USB-C input port on the device.
2. Connect the provided USB-C charging cable to the jump starter's input port.
3. So opin keji okun USB-C pọ mọ adapter odi USB ti o baamu (ko si ninu rẹ) tabi ṣaja ọkọ ayọkẹlẹ.
4. The LED indicator lights on the jump starter will illuminate to show the charging progress. All lights solid indicate a full charge.
5. A full charge typically takes approximately 2.6 hours for the V3 Pro.

Image: The VTOMAN V3 Pro Jump Starter connected to a wall adapter via a USB-C cable, illustrating the charging process.

5. Setup: Connecting Jumper Cables

The smart jumper cables are designed for safe and easy connection to the jump starter unit.

Awọn Igbesẹ Asopọmọra:

1. Locate the dedicated jump start socket on the side of the VTOMAN Jump Starter unit (marked with a car icon).
2. Insert the blue connector end of the smart jumper cables into this socket. Ensure it is firmly seated.
3. The jump starter's power indicator lights will activate, and the smart cable's indicator will show its status.

6. Awọn ilana Iṣiṣẹ

6.1. Fo Bibẹrẹ Ọkọ

1. Rí i dájú pé olùbẹ̀rẹ̀ náà ti gba agbára tó.
2. Connect the smart jumper cables to the jump starter unit as described in the Setup section.
3. So pupa (+) clamp sí ibi tí batiri ọkọ̀ náà wà ní ojú ọ̀nà tó dára.
4. So dudu (-) clamp to the negative terminal of the vehicle's battery.
5. Observe the indicator on the smart jumper cable:
• LED alawọ ewe to lagbara: Connection is correct, and the vehicle can be started directly.
• LED pupa: Reverse connection. Please correct the polarity of the battery clamps.
• Green LED (blinks): Ti nše ọkọ batiri voltage is too low. Press the