XTUGA J02S Wireless In-Ear Monitor System User Manual

1. Ifihan

This user manual provides detailed instructions for the setup, operation, and maintenance of your XTUGA J02S 2.4G Mini Wireless In-Ear Monitor (IEM) System. Designed for musicians, singers, bands, and stage performers, this system offers reliable audio transmission with low latency and versatile stereo/mono switching capabilities. Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Alaye Aabo

• Ma ṣe fi ẹrọ naa han si omi tabi ọrinrin pupọ.
• Yago fun awọn iwọn otutu to gaju ati imọlẹ orun taara.
• Ma ṣe gbiyanju lati tu tabi tun ẹya ara rẹ ṣe. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ.
• Jeki kuro ni arọwọto awọn ọmọde.
• Lo okun gbigba agbara ti a pese nikan ati awọn ẹya ẹrọ.
• Prolonged listening at high volume levels can cause permanent hearing damage. Set the volume to a comfortable level.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• 1 x XTUGA J02S Transmitter
• 1 x XTUGA J02S Receiver
• 1 x Tọkọtaya Awọn Agbekọri ti Ti firanṣẹ
• 1 x 3.5mm Connecting Cable
• 1 x Okun Ngba agbara USB
• 1 x 6.35mm Plug Adapter
• 1 x Itọsọna olumulo (iwe yii)

Image: Contents of the XTUGA J02S package, including transmitter, receiver, earphones, cables, and adapter.

4. Ọja Ipariview

Familiarize yourself with the components of your XTUGA J02S system:

Image: The XTUGA J02S wireless transmitter and receiver units, showing their compact design and input/output ports.

Atagba (TX)

• Ibudo igbewọle: 3.5mm jack for connecting audio sources.
• Bọtini agbara: Tẹ mọlẹ lati fi agbara tan/pa a.
• Bọtini Yipada Ipo: Double-click to switch between Mono and Stereo modes.
• Bọtini Mute: Press to mute/unmute audio transmission.
• Awọn Atọka Ipo LEDs for signal strength, battery level, and mute status.
• Ibudo Ngba agbara USB-C: Fun gbigba agbara ti abẹnu batiri.
• Agekuru igbanu: For attaching to clothing or equipment.

Olugba (RX)

• Ibudo Ijade: Jack 3.5mm fun sisopọ awọn agbekọri.
• Bọtini Iwọn didun: Rotary control for adjusting output volume.
• Bọtini agbara: Tẹ mọlẹ lati fi agbara tan/pa a.
• Awọn Atọka Ipo LEDs for signal strength, battery level, and mute status.
• Ibudo Ngba agbara USB-C: Fun gbigba agbara ti abẹnu batiri.
• Agekuru igbanu: For attaching to clothing or equipment.

5. Eto

5.1 Ngba agbara si Awọn ẹrọ

Before first use, fully charge both the Transmitter and Receiver. Use the provided USB charging cable to connect each unit to a USB power adapter (not included) or a computer USB port.

• The battery indicator LEDs will show charging progress.
• A full charge provides approximately 8 hours of operation.
• When the battery is low, a red light will flash to indicate low battery.

Image: Illustration showing the 8-hour battery life and the charging process for both the transmitter and receiver units.

5.2 Titan / Pa a

Press and hold the Power Button on both the Transmitter and Receiver for a few seconds until the indicator lights illuminate. To power off, press and hold the Power Button again.

5.3 Pairing the Devices

The Transmitter and Receiver are designed for quick pairing. Once both units are powered on, they should automatically connect. If they do not pair, double-click the power button on the receiver to initiate pairing. The signal indicator LEDs will confirm a successful connection.

5.4 Nsopọ Orisun Audio

Connect your audio source (e.g., mixer, instrument, audio interface) to the Ibudo igbewọle on the Transmitter using the provided 3.5mm connecting cable. If your audio source has a 6.35mm output, use the included 6.35mm plug adapter.

5.5 Nsopọ awọn Earphones

Plug the wired earphones (or your preferred in-ear monitors) into the Port O wu lórí Olùgbà.

6. Awọn ilana Iṣiṣẹ

6.1 Mono/Stereo Mode Switching

The J02S system supports both Mono and Stereo audio modes. To switch between modes, double-click the Mode Switch Button on the Transmitter. The indicator light will change to reflect the current mode (e.g., green for Mono, blue for Stereo).

• Ipo Mono: Latency < 4.5ms. Suitable for single-channel monitoring.
• Ipo Sitẹrio: Latency < 11ms. Provides a wider soundstage fun kan diẹ immersive iriri.

Image: Visual representation of the one-click mono or stereo switching function on the transmitter unit.

6.2 dakẹ Išė

To quickly mute the audio transmission, press the Mute Button on the Transmitter. The yellow indicator light will remain on to signify that the device is in a silent state. Press the button again to unmute.

Image: Diagram illustrating the one-click mute function, showing the sound wave before and after muting, with the yellow indicator light.

6.3 iwọn didun tolesese

Adjust the listening volume using the rotary Volume Knob on the Receiver. Rotate clockwise to increase volume and counter-clockwise to decrease it.

6.4 Multi-Receiver Setup

The XTUGA J02S system supports connecting up to 6 receivers to a single transmitter. To achieve this, ensure all transmitters and receivers are set to the same channel. This feature is ideal for bands or groups sharing a single audio mix.

Image: A grid showing multiple combinations of XTUGA J02S transmitter and receiver units, illustrating the capability for one transmitter to connect to up to six receivers simultaneously.

6.5 Alailowaya Range

The system provides a stable wireless transmission range of up to 164 feet (50 meters) between the transmitter and receiver. Optimal performance is achieved in open environments. Obstacles such as walls or large metal objects may reduce the effective range.

Image: A visual representation of the 50-meter transmission distance between the XTUGA J02S transmitter and receiver units.

6.6 Awọn oju iṣẹlẹ lilo

The compact design and clip feature allow for versatile use in various settings:

• Stage išẹ
• Awọn apejọ
• Rehearsals
• Sisanwọle ifiwe

Image: Four panels depicting different usage scenarios for the XTUGA J02S system, including stage performance, conference, rehearsal, and live streaming.

7. Itọju

• Ninu: Lo asọ ti o tutu, ti o gbẹ lati nu awọn aaye ti atagba ati olugba. Maṣe lo awọn olutọpa olomi tabi awọn aerosols.
• Ibi ipamọ: Tọju eto naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju nigbati ko si ni lilo.
• Itọju Batiri: For optimal battery life, avoid fully discharging the units regularly. If storing for extended periods, charge the batteries to about 50% every few months.

8. Laasigbotitusita

9. Awọn pato

10. Atilẹyin ọja ati Support

XTUGA products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official XTUGA webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.

11. Fidio ọja