SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller User Manual

1. Ifihan

This manual provides instructions for the installation, operation, and maintenance of the SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller. This device is designed for seamless integration into lighting systems, offering wireless control for both residential and commercial applications. It operates on 120-277VAC line voltage and supports various load types.

Figure 1: SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller with its packaging.

2. Alaye Aabo

• IKILO: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
• Disconnect power at the circuit breaker or fuse before installing or servicing the device.
• Do not use this device with loads exceeding its specified ratings.
• Rii daju pe gbogbo awọn asopọ waya wa ni aabo ati idabobo daradara.
• Ẹrọ yii jẹ ipinnu fun lilo inu ile nikan.
• The device meets regulatory guidelines for current leakage, ensuring safe operation.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Wireless Wall Switch and Load Controller (SWX-851-WH)
• Waya nyorisi
• Iṣagbesori skru
• Awọn eso Waya
• Àwọn ìlànà (ìtọ́sọ́nà yìí)

4. Eto ati fifi sori

4.1 Awọn itọnisọna Wiring

The SWX-851-WH supports both 2-wire and 3-wire installations and does not require a neutral connection or a minimum load. It is compatible with 120-277VAC line voltage awọn ọna šiše.

• Ṣaaju ki o to bẹrẹ: Pa a agbara ni Circuit fifọ.
• Identify the LINE (hot) and LOAD wires in the wall box.
• Connect the wires from the SWX-851-WH to the corresponding wires in the wall box using the provided wire nuts:
  • Waya Dudu: Connect to LINE (hot) wire.
  • Blue Waya: Connect to LOAD wire.
  • Okun Alawọ ewe: Connect to GROUND wire.
  • White (or Yellow/Green) Wire: This is the NEUTRAL connection. If a neutral connection is available and desired, connect it. If no neutral is present or required, cap this wire off.
• Rii daju pe gbogbo awọn asopọ wa ni aabo.

olusin 2: Ẹyìn view of the SWX-851-WH, illustrating wiring connections. Black for Line, Blue for Load, Green for Ground, and White/Yellow/Green for Neutral (optional).

4.2 Fifi sori ti ara

• Carefully push the wired controller into the wall box. The compact design allows for easier installation in crowded boxes.
• Secure the controller to the wall box using the provided mounting screws.
• Install the wall plate (not included) over the controller.
• Mu pada agbara ni awọn Circuit fifọ.

4.3 Alailowaya Sisopọ

The SWX-851-WH can be paired with up to 30 wireless sensors and remote wall stations for automatic lighting control. Refer to the specific instructions for your SENSORWORX wireless sensors or remote wall stations for pairing procedures. Typically, pairing involves a sequence of button presses on both devices.

For detailed instructions, you may scan the QR code on the back of the device or visit the SENSORWORX website. A direct link to the instructions is available Nibi.

5. Isẹ

5.1 Ipilẹ Tan / Pa Iṣakoso

The primary function of the SWX-851-WH is to control connected lighting loads. Press the button on the switch to toggle the connected lights ON or OFF.

olusin 3: Iwaju view of the SWX-851-WH, showing the control button.

5.2 To ti ni ilọsiwaju iṣeto ni

The SWX-851-WH offers configurable settings for time delays, operational modes (occupancy, vacancy, switch disable), and photocell settings. These adjustments can be made without removing the cover plate, typically through specific button press sequences or via a paired sensor/programmer.

• Ipo Ibugbe: Lights turn ON automatically when occupancy is detected and OFF after a set time delay when the space is vacant.
• Ipo Ofo: Lights must be turned ON manually but turn OFF automatically after a set time delay when the space is vacant.
• Switch Disable Mode: Disables the local switch button, allowing control only via paired wireless devices.
• Eto Photocell: Adjusts light level thresholds for automatic control based on ambient light.

Consult the full product documentation or the SENSORWORX website for detailed instructions on accessing and modifying these advanced settings.

6. Itọju

• Ninu: To clean the device, wipe with a soft, damp Aṣọ. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ. Rí i dájú pé agbára ti pa kí o tó fi mọ́.
• Ayewo: Periodically inspect the device for any signs of damage or loose connections. If damage is found, disconnect power and contact a qualified electrician.
• Ko si awọn ẹya iṣẹ olumulo ti o wa ninu.

7. Laasigbotitusita

If the problem persists after attempting these solutions, contact SENSORWORX customer support or a qualified electrician.

8. Awọn pato

9. Atilẹyin ọja ati Support

9.1 Atilẹyin ọja

The SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller comes with a 5-odun atilẹyin ọja from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims, please retain your proof of purchase.

9.2 Onibara Support

For technical assistance, troubleshooting, or warranty inquiries, please contact SENSORWORX customer support. Visit the official SENSORWORX webaaye fun alaye olubasọrọ ati afikun oro.

Webojula: www.sensorworx.com