Mcezdy M5-5-Pin Ebike Display User Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your Mcezdy M5-5-Pin Ebike Display. Designed to enhance your cycling experience, this advanced LCD display offers real-time data and control over your electric bicycle's functions. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Alaye Aabo

• Always ensure the display is securely mounted and all connections are firm before riding.
• Do not attempt to open or modify the display unit, as this may void the warranty and cause damage.
• Avoid exposing the display to extreme temperatures or direct sunlight for prolonged periods.
• Regularly check the display for any signs of damage or wear. Replace if necessary.
• Ensure your ebike's controller is compatible with the UART No. 2 protocol and the 5-Pin connector of this M5-5-Pin model. Incompatibility can lead to malfunction.

3. Ọja Ipariview

The Mcezdy M5-5-Pin Ebike Display is a robust cycling computer designed for durability and comprehensive data display. It features an aluminum alloy frame, tempered glass screen, and a user-friendly interface.

3.1 Key Awọn ẹya ara ẹrọ

• Ifihan Data-akoko-gidi: Provides immediate access to speed, battery level, PAS level, and mileage.
• Ikole ti o tọ: Crafted with a rugged ABS and PC housing, aluminum alloy frame, and tempered glass screen for enhanced longevity.
• Jakejado Voltage ibamu: Supports 24V, 36V, 48V, and 60V ebike battery systems.
• Personalized Control: Includes features like walk-assist mode, cruise control, real-time trip tracking, total mileage, voltage display, and adjustable bike parameters (wheel diameter, speed limits).
• IPX65 Mabomire Rating: Offers protection against water splashes, suitable for various weather conditions.

3.2 irinše

The M5-5-Pin Ebike Display package includes:

• Mcezdy M5-5-Pin LCD Display Unit
• Bọtini Iṣakoso
• Oke Atẹgun
• 5-Pin Waterproof Cable (JL-F-Z509AG)
• Iwe afọwọkọ olumulo (iwe yii)
• Fault Code Description (separate document or section)

4. Ibamu

Important: This M5 ebike display operates using the UART No. 2 protocol. It is only compatible with ebike controllers that utilize the same UART No. 2 protocol. Additionally, ensure your ebike controller is compatible with the 5-Pin connector of this M5-5-Pin model.

To determine your ebike's communication protocol:

1. Consult your ebike's user manual or technical documentation.
2. Examine your current ebike display for protocol information.
3. Contact your ebike manufacturer for specific details regarding communication protocols.

5. Eto ati fifi sori

The Mcezdy M5-5-Pin Ebike Display is designed for straightforward installation. Follow these steps carefully:

5.1 Iṣagbesori Ifihan

1. Identify a suitable position on your ebike's handlebar. The flexible bracket accommodates handlebar sizes of 22.2mm, 25.4mm, and 31.8mm.
2. Loosen the screws on the mounting bracket.
3. Place the bracket around the handlebar and tighten the screws until the display is securely fixed and does not rotate freely.
4. Adjust the angle of the display for optimal viewing.

5.2 Nsopọ awọn okun

The display comes with a 5-pin waterproof cable (JL-F-Z509AG) with an exposed cable length of 1800mm.

1. Locate the corresponding 5-pin connector on your ebike's controller or wiring harness.
2. Align the pins carefully and firmly push the display's connector into the ebike's connector until it clicks into place. Ensure a secure, waterproof connection.
3. Route the cable neatly along your ebike frame, securing it with cable ties to prevent snagging or damage.

6. Awọn ilana Iṣiṣẹ

The Mcezdy M5-5-Pin display provides various functions accessible via its integrated keypad.

6.1 Agbara Tan / Pa

• To power on the display, press and hold the power button on the keypad for a few seconds.
• Lati pa agbara, tẹ mọlẹ bọtini agbara lẹẹkansi titi ti ifihan yoo wa ni pipa.

6.2 Alaye Ifihan

Ifihan naa pese alaye wọnyi:

• Iyara: Iyara gigun lọwọlọwọ.
• Energy Bar/Battery Level: Tọkasi idiyele batiri ti o ku.
• Ipele PAS (Eto Iranlọwọ Pedal): Ṣe afihan ipele iranlọwọ mọto lọwọlọwọ.
• Voltage (VOL): Han awọn ti isiyi batiri voltage.
• ODO (Odometer): Total accumulated mileage.
• Ijinna Irin ajo: Distance covered in the current ride.
• Atọka Imọlẹ iwaju: Shows if the ebike's headlight is active.

6.3 Ṣíṣe àtúnṣe àwọn Ètò àti Àwọn Ìgbésẹ̀

Use the buttons on the keypad to navigate and adjust settings:

• Changing PAS Level: Tẹ awọn + or - buttons to increase or decrease the pedal assist level.
• Walk-Assist Mode: Typically activated by holding down the - button. This provides low-speed assistance for walking the ebike.
• Iṣakoso oko oju omi: Refer to your ebike's controller manual for specific activation of cruise control, often initiated by holding a specific button on the display or keypad.
• Accessing Parameter Settings: To modify advanced parameters such as wheel diameter or speed limits, a specific sequence of button presses (e.g., holding + ati - simultaneously) is usually required. Consult the "Fault Code Description" or a more detailed technical manual for your ebike's controller for exact procedures.

7. Itọju

Proper maintenance ensures the longevity and optimal performance of your Mcezdy M5-5-Pin Ebike Display.

• Ninu: Mu ese iboju ati ara pẹlu asọ, damp cloth. Avoid using abrasive cleaners or solvents that could damage the screen or housing.
• Ayewo: Periodically check all cable connections for tightness and signs of wear or corrosion. Ensure the mounting bracket remains secure.
• Ifihan omi: While the display is IPX65 waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Dry any moisture promptly.
• Ibi ipamọ: When not in use for extended periods, store the ebike and display in a cool, dry place away from direct sunlight.

8. Laasigbotitusita

If you encounter issues with your Mcezdy M5-5-Pin Ebike Display, refer to the following common problems and solutions:

For specific fault codes, please refer to the included "Fault Code Description" document or contact Mcezdy customer support.

9. Awọn pato

10. Atilẹyin ọja ati Support

The Mcezdy M5-5-Pin Ebike Display comes with a 1-Odun olupese atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ ṣiṣe labẹ lilo deede.

For warranty claims, technical support, or any questions not covered in this manual, please contact Mcezdy customer service through the retailer where the product was purchased or visit the official Mcezdy webojula.

Jọwọ ṣe idaduro ẹri rira rẹ fun ijẹrisi atilẹyin ọja.