WORKPRO Portable Tire Inflator

Ọrọ Iṣaaju

This manual provides essential information for the safe and effective operation of your WORKPRO Portable Tire Inflator Model W125218A. Please read this manual thoroughly before use and retain it for future reference.

The WORKPRO Portable Tire Inflator is a versatile device designed for inflating tires on cars, motorcycles, bicycles, and various sports balls. It features a digital display, automatic shut-off, multiple inflation modes, and an integrated LED light for convenience and safety.

Awọn Itọsọna Aabo

• Ka Gbogbo Awọn Ilana: Before operating the inflator, read and understand all safety warnings and instructions in this manual.
• Idaabobo Oju: Always wear safety glasses when operating the inflator to protect against potential debris.
• Idaabobo igbọran: The inflator can be loud during operation. Use hearing protection, especially during prolonged use.
• Jeki kuro lati awọn ọmọde: This device is not a toy. Keep it out of reach of children.
• Lilo daradara: Lo inflator nikan fun idi ipinnu rẹ. Ma ṣe gbiyanju lati fa awọn ohun kan kọja awọn opin titẹ ti a ṣeduro wọn.
• Igbóná púpọ̀: The inflator may become hot during extended use. Allow it to cool down between inflation cycles to prevent damage and burns. The air hose and chuck can become very hot.
• Aabo Batiri: Do not expose the inflator to extreme temperatures or direct sunlight. Do not disassemble or modify the battery pack.
• Gbigba agbara: Use only the provided charging cable and a compatible power adapter. Do not charge in damp awọn ipo.
• Ibi ipamọ: Store the inflator in a dry, cool place away from flammable materials.
• Check Tire Pressure Manually: While the inflator has a digital display, it is recommended to verify tire pressure with a separate, calibrated gauge for critical applications.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• WORKPRO Portable Tire Inflator
• Air Hose with Schrader Valve Connector
• Adapter Valve Adaṣe
• Ball abẹrẹ Adapter
• Nozzle Adapter for Inflatables
• Okun Ngba agbara USB (Iru-C)
• Apo ipamọ
• Itọsọna olumulo

Ọja Pariview

Familiarize yourself with the components of your WORKPRO Portable Tire Inflator.

Aworan: Iwaju view of the WORKPRO Portable Tire Inflator, showing the digital display, control buttons, and air hose connection point.

Aworan: Diagram illustrating the 7500 mAh large battery capacity of the WORKPRO Portable Tire Inflator, capable of inflating multiple car tires on a single charge.

• Ifihan Digital: Shows real-time pressure, preset pressure, battery level, and mode.
• Awọn bọtini Iṣakoso: Power, Mode selection, Increase/Decrease pressure.
• Isopọ Air Hose: Point where the inflation hose attaches.
• Imọlẹ LED: Fun itanna ni awọn ipo ina kekere.
• Ibudo Ngba agbara USB-C: Fun gbigba agbara ti abẹnu batiri.
• Ibudo Ijade USB-A: Functions as a power bank for external devices.

Ṣeto

1. Charging the Inflator

Before first use, fully charge the inflator. The device is powered by three 2500mAh rechargeable batteries.

1. Connect the provided USB-C charging cable to the inflator's charging port.
2. Connect the other end of the cable to a suitable USB power adapter (not included) or a USB port.
3. The digital display will indicate the charging status. A full charge typically takes 3 to 5 hours.
4. Ni kete ti o ti gba agbara ni kikun, ge asopọ okun gbigba agbara.

2. Attaching the Air Hose

Screw the air hose firmly onto the inflator's air outlet port. Ensure it is tight to prevent air leakage during operation.

Awọn ilana Iṣiṣẹ

1. Agbara lori / Paa

• Agbara Tan: Tẹ mọlẹ bọtini agbara (□) for 3 seconds. The digital display will illuminate.
• Agbara Pa: Tẹ mọlẹ bọtini agbara (□) for 3 seconds. The display will turn off. The device will also automatically power off after a period of inactivity.

2. Selecting Inflation Mode and Pressure Unit

Aworan: Digital display of the inflator showing different preset inflation modes for car, motorcycle, bicycle, and balls, along with a manual mode.

• Aṣayan Ipo: Kukuru tẹ bọtini Ipo (M) to cycle through the 5 available inflation modes: Car, Motorcycle, Bicycle, Ball, and Manual. Each mode has a preset default pressure value.
• Ẹka Ipa: While in any mode, long press the Mode button (M) to switch between pressure units: PSI, BAR, and KPA.

3. Setting Target Pressure

• After selecting a mode, the preset pressure will be displayed.
• Use the Increase (+) and Decrease (-) buttons to adjust the target pressure to your desired value. The maximum adjustable pressure is 150 PSI.
• The display will flash while adjusting and then stabilize, indicating the set target pressure.

4. Connecting to the Item to be Inflated

• For car/motorcycle/bicycle tires: Screw the Schrader valve connector of the air hose onto the tire valve stem. Ensure a secure, airtight connection.
• For Presta valves (bicycles): Attach the Presta valve adapter to the tire valve, then connect the Schrader valve connector to the adapter.
• For balls/inflatables: Select the appropriate adapter (ball needle or nozzle adapter) and attach it to the Schrader valve connector, then insert into the item.
• Once connected, the digital display will show the current real-time pressure of the item.

5. Starting and Stopping Inflation

Aworan: The WORKPRO Portable Tire Inflator connected to a car tire, demonstrating fast inflation capabilities, showing inflation times for different pressure ranges.

• Ibẹrẹ Iṣeduro: Tẹ bọtini Bẹrẹ / Duro (▶) to begin inflation. The display will show the increasing real-time pressure.
• Pipa-Adaaṣe: The inflator will automatically stop when the preset target pressure is reached.
• Iduro Afowoyi: You can manually stop inflation at any time by pressing the Start/Stop button (▶) lẹẹkansi.
• Àwọn Àmì Ìfúnpá: After connecting, the inflator uses three-color indicators:
  • Pupa: Pressure exceeds 110% of the preset value.
  • Alawọ ewe: Pressure is between 90% and 110% of the preset value.
  • Yellow: Pressure is below 90% of the preset value.

Aworan: Close-up of the inflator's digital display highlighting the three-color LED indicators for real-time pressure status (Red, Yellow, Green) and the automatic inflation stop feature.

6. Lilo Imọlẹ LED

Aworan: The WORKPRO Portable Tire Inflator being used as an LED flashlight in various scenarios, including illuminating a bicycle path, a dark area, and a car engine bay.

• Short press the Light button (☀) to turn on the LED light.
• Press again to cycle through different light modes (e.g., steady light, flashing, SOS).
• Press a third time to turn off the LED light.

7. Lílo bí Báńkì Agbára Tó Ń Gbé Kún

Aworan: The WORKPRO Portable Tire Inflator connected via USB to a smartphone, demonstrating its function as a portable power bank for charging electronic devices.

• The inflator can serve as a backup power bank for your electronic devices.
• Connect your device's USB charging cable to the USB-A output port on the inflator.
• Gbigba agbara yoo bẹrẹ laifọwọyi.

Itoju

• Ninu: Mu ese ita ti inflator pẹlu asọ, damp asọ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
• Ibi ipamọ: Store the inflator and its accessories in the provided storage bag in a cool, dry place when not in use.
• Itọju Batiri: To prolong battery life, charge the inflator at least once every three months, even if not in regular use. Avoid fully discharging the battery frequently.
• Ṣayẹwo Hose ati Awọn Adapter: Regularly check the air hose and adapters for any signs of wear, cracks, or damage. Replace if necessary.

Laasigbotitusita

Awọn pato

Aworan: The WORKPRO Portable Tire Inflator displayed with its various adapters, illustrating its wide range of applications for inflating car, motorcycle, bicycle tires, balls, and swimming rings.

Atilẹyin ọja ati Support

WORKPRO products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official WORKPRO webojula.

Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.