Ọrọ Iṣaaju
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your SYLVOX Mobile TV Floor Stand. This heavy-duty rolling TV stand is designed for 65-75 inch flat or curved televisions, supporting a maximum load of 132 lbs (60 kg). It features lockable wheels for mobility and stability, universal VESA compatibility, and integrated cable management.
Please read this manual thoroughly before installation and use to ensure safe and correct operation.
Alaye Aabo
- Agbara iwuwo: Do not exceed the maximum load capacity of 132 lbs (60 kg). Overloading can cause instability and potential injury.
- Iwon TV: This stand is designed for 65-75 inch TVs. Ensure your TV's size and weight are within the specified limits.
- Ibamu VESA: Verify your TV's VESA mounting pattern is within the supported range (200x200mm to 1200x600mm).
- Apejọ: Assemble the stand on a soft, clean surface to prevent scratches. Ensure all screws are tightened securely before mounting the TV.
- Iduroṣinṣin: Always engage the locking wheels when the stand is in a stationary position to prevent accidental movement.
- Gbigbe: When moving the stand, ensure the TV is securely attached and move slowly and carefully, especially over uneven surfaces.
- Awọn ọmọde ati awọn ohun ọsin: Keep children and pets away from the stand during assembly and ensure the TV is securely mounted to prevent tipping.
Package Awọn akoonu
Please check that all components are present and undamaged. If any parts are missing or damaged, contact customer support.
- Main Frame Components (Base, Vertical Columns, Crossbars)
- TV iṣagbesori biraketi
- Lockable Caster Wheels (x4)
- Hardware Kit (various screws, washers, spacers for assembly and TV mounting)
- Cable Management Box/Clips
- Assembly Tools (e.g., Allen wrench, small spanner)
- Ilana itọnisọna
Eto ati Apejọ
Follow these steps carefully for proper assembly. It is recommended to have two people for TV mounting.
Step 1: Assemble the Base and Vertical Columns
- Attach the caster wheels to the base legs. Ensure two of the wheels are lockable and positioned as per the diagram.
- Connect the vertical support columns to the base using the provided screws and tools.
- Secure any crossbars or shelves to the vertical columns as indicated in the assembly diagram.
Image: Initial assembly of the stand's base and vertical supports.
Step 2: Attach TV Mounting Brackets to Your TV
- Farabalẹ gbe oju TV rẹ si isalẹ lori rirọ, dada mimọ.
- Ṣe idanimọ awọn ihò iṣagbesori VESA lori ẹhin TV rẹ.
- Yan awọn skru, awọn fifọ aṣọ, ati awọn aaye ti o yẹ lati inu ohun elo ohun elo ti o baamu ilana VESA ti TV rẹ.
- Attach the TV mounting brackets to the back of your TV, ensuring they are level and securely fastened. Do not overtighten.
Image: Diagram showing VESA mounting hole patterns and bracket attachment.
Igbesẹ 3: Gbe TV sori Iduro
- With assistance, carefully lift the TV and hook the attached mounting brackets onto the main frame of the stand.
- Rii daju pe TV wa ni aarin ati ipele.
- Secure the TV to the stand using the safety screws or locking mechanisms on the brackets.
Fifi sori Video Itọsọna
Video: Official SYLVOX Rolling TV Stand Installation Guide. This video demonstrates the step-by-step assembly process for the TV stand.
Awọn ilana Iṣiṣẹ
Arinbo ati Iduroṣinṣin
The stand is equipped with four heavy-duty caster wheels for easy movement. Two of these wheels are lockable to ensure stability when the stand is stationary.
- Lati gbe: Unlock the two lockable wheels by flipping their levers. Gently push the stand to your desired location.
- To Secure: Once in position, engage the locks on the two lockable wheels to prevent unintended movement.
Image: Close-up of lockable casters and illustration of stand mobility.
USB Management
Utilize the integrated cable management features to keep your setup tidy and prevent cable tangles.
- Route TV and device cables through the designated cable clips or channels on the stand's frame.
- Use the compact storage box (if included) to house small streaming devices or remote controls, keeping them out of sight.
Aworan: Example of cables neatly routed through the stand's frame.
Itoju
- Ninu: Fi aṣọ rírọrùn tí ó gbẹ nu àpótí náà. Fún àwọn àmì líle, lo àmì díẹ́ díẹ̀.amp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners.
- Ṣiṣayẹwo ohun elo: Máa ṣàyẹ̀wò gbogbo àwọn skru àti bọ́ọ̀lù láti rí i dájú pé wọ́n wà ní ìdúró. Tún di mọ́ ọn tí ó bá pọndandan.
- Awọn kẹkẹ Caster: Keep the caster wheels free of debris (hair, dust, etc.) to ensure smooth rolling. Lubricate if needed.
- Awọn ipo Ayika: While the stand is robust, prolonged exposure to extreme weather conditions (e.g., heavy rain, direct sunlight for extended periods) may affect its finish and longevity. If used outdoors, consider covering it when not in use.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Iduro naa ko duro ṣinṣin tabi o n mì. | Screws are loose; TV is too heavy or not centered; uneven floor. | Check and tighten all assembly screws. Ensure TV weight is within limits and centered. Move to a level surface or use shims if necessary. |
| Awọn kẹkẹ Caster kii yi lọ laisiyonu. | Debris caught in wheels; wheels are locked. | Clear any debris from the wheels. Ensure lockable wheels are in the unlocked position. |
| TV does not fit the mounting brackets. | Àwòrán VESA tí kò tọ́; a ti lo àwọn skru/spacer tí kò tọ́. | Verify your TV's VESA pattern matches the stand's compatibility (200x200mm to 1200x600mm). Use the correct screws and spacers from the hardware kit. |
| Awọn ẹya ti o padanu tabi awọn paati ti o bajẹ. | Aṣiṣe apoti tabi bibajẹ sowo. | Contact SYLVOX customer support immediately for assistance. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | SYLVOX |
| Awoṣe | B0FD3C5CFN |
| Iṣagbesori Iru | Floor Oke |
| Iṣipopada Iru | Rotate (implies swivel, not full rotation) |
| Ohun elo | Alloy Irin |
| Àwọ̀ | Dudu |
| Awọn ẹrọ ibaramu | Tẹlifisiọnu |
| Minimum Supported Screen Size | 60 inches |
| Maximum Supported Screen Size | 120 inches (Note: Product title specifies 65-75 inches, but specifications list up to 120 inches. User should verify VESA for larger TVs.) |
| O pọju fifuye Agbara | 132 lbs (60 kg) |
| VESA ibamu | 200x200mm to 1200x600mm |
| Olupese | Kontech |
Image: Technical drawing showing the dimensions of the TV stand.
Atilẹyin ọja ati Support
Alaye atilẹyin ọja
This SYLVOX TV Floor Stand comes with a 1-odun atilẹyin ọja from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or exceeding the specified weight capacity.
Fún àwọn ẹ̀tọ́ àtìlẹ́yìn, jọ̀wọ́ pa ẹ̀rí ìràwọ́ rẹ mọ́.
Onibara Support
If you encounter any issues during assembly or operation, or if you have questions about your product, please contact the seller, FutureIntelligence, through your purchase platform. They can provide assistance and guidance.
For general inquiries about SYLVOX products, you may visit the official SYLVOX store on Amazon: SYLVOX Amazon Store